Lubricating oils

Pour point: -51 °C
Flash point: 222 °C

All racing gasoline or Diesel engines, naturally aspirated, turbocharged or supercharged fitted withinjection (direct/indirect) or carburetted.For tuned engines and high performance cars operating over a wide range of rpm and temperatures, ...

Pour point: -45 °C
Flash point: 226 °C

All racing gasoline or Diesel engines, naturally aspirated, turbocharged or supercharged fitted with injection (direct/indirect) or carburetted.For tuned engines and high performance cars operating over a wide range of rpm and temperatures, ...

Pour point: -42 °C
Flash point: 224 °C

All racing gasoline or Diesel engines, naturally aspirated, turbocharged or supercharged fitted withinjection (direct/indirect) or carburetted.For tuned engines and high performance cars operating over a wide range of rpm and temperatures, ...

Viscosity: 0.000016, 0.000023 m²/s
Flash point: 180, 200 °C

... Improvement to operators health due to almost no carcinogenic compounds as polycyclic aromatic hydrocarbons present in the oil. Reduced oil mists and less product consumption through evaporation, due ...

Operating temperature: -3 °C - 240 °C

... biodegradable-based neat cutting lubricant VALONA MS 7010 BIO is a vegetable oil cutting oil designed for turning, drilling, tapping, grinding and honing on ferrous and non ferrous ...

Viscosity: 0.00046, 0.00068, 0.001 m²/s
Flash point: 310, 306, 300 °C

Viscosity :ISO VG 1000 Good compatibility with seals. High ignition point. Benefits from advanced refining. Low carbone residue.

Flash point: 260 °C

... pump oil has excellent viscosity characteristics. Its good chemical resistance, low vapor pressure as well as its better stability when pumping oxidants such as acid and alkaline vapors, makes it superior compared to ...

Operating temperature: -40 °C - 300 °C
Flash point: 0 °C

Operating temperature: -5 °C - 60 °C

Food grade dry film lubricant SKF LDTS 1 has been specially developed for automatic lubrication of plastic flat top chain conveyors in the beverage processing industry. The lubricant ...

Operating temperature: -30 °C - 130 °C

General purpose food grade chain oil LFFM 100 is a high-performance synthetic chain oil specially formulated for the lubrication of chains operating in food processing and pharmaceutical ...

Operating temperature: 250 °C

High temperature food grade chain oil LFFT 220 is a high performance synthetic oil specially formulated for the lubrication of chains operating at high temperatures and high loads ...

Viscosity: 0.00009 m²/s
Pour point: 230 °C
Flash point: -30 °C

... additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils Highly effective due to finest, homogeneous MoS₂ distribution in ...

Operating temperature: 0 °C - 200 °C
Viscosity: 0.000108 m²/s
Pour point: 240 °C

OKS 310 is a high-temperature oil with MoS₂ for lubrication of machine elements up to +450°C. Technical specifications density (at 20°C): 1.01 g/cm³ four-ball test rig welding load: 2,800 N Applications For ...

Operating temperature: -30 °C - 180 °C
Viscosity: 0.00047 m²/s

... automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. In as far as available, observe the machine manufacturer's ...

Operating temperature: -10 °C - 225 °C
Flash point: 210, 220, 240, 230, 235 °C

Flash point: 240, 210 °C

Monograde mineral engine oil for diesel engines. Especially recommended for construction, OP, agricultural machinery,... with or without turbochargers. Available in 1, 5, 20, 50, 50, 209, 1000 litre formats. ISO viscosity ...

Operating temperature: -30 °C - 215 °C
Flash point: 130 °C - 230 °C

Developed for use in hydraulic systems and circuits with hydrostatic systems. High anti-wear protection. Its low freezing point facilitates work in winter. Viscosity index greater than 110. Available in 1, 5, 20, 50, 209, 1000 litre sizes. ...

Food Processing Safe, light multipurpose oil for general use. Extremely efficient and effective general-purpose lubricant, for use in the food industry. CRC Multi Oil is NSF H1 registered, exhibits ...

Semi-synthetic cutting fluid for cutting and rectification operations on all kinds of metals (steel, copper, aluminum, stainless steel, etc.). This cutting fluid provides a significant extension of the life time of cutting tools and ...

Short-term corrosion inhibitor. Indoor protection up to 6 months. Multipurpose corrosion inhibitor with water repellant and lubricating properties. Forms a thin, almost invisible and long-lasting protective film against ...

Operating temperature: -40 °C - 168 °C
Viscosity: 0.000015 m²/s - 0.000091 m²/s

Synthetic oil used, for instance, for gearboxes of passenger cars using cold fluid oil (Renault, Peugeot, Citroën). Benefits High viscosity index and good liquidity at low temperatures; makes ...

Operating temperature: -33 °C - 234 °C
Viscosity: 0.000011 m²/s - 0.000079 m²/s

... multifunctional lubricant for farm tractors. It is a S.T.O.U. lubricant (Super Tractor Oil Universal) for optimal lubrication of all machine parts of agricultural equipment: ...

Operating temperature: -25 °C - 211 °C
Viscosity: 0.000013 m²/s - 0.000084 m²/s

Europa is suitable for the lubrication of four-stroke gasoline and diesel engines of passenger cars and vans. Benefits Carefully selected base oils and additives assuring excellent lubrication ...

... green environmental protection pure vegetable trace lubricating oil, completely soluble in cold water. Product Benefits: Eliminate coolant: no oil mist, improving air quality Eliminate ...

Operating temperature: 320 °C

200 ltrs. drum HTF mineral oil for heat transfer that can be used in any type installations with maximum outlet temperature of 305 °C boiler wall and maximum temperature in the boiler of 320 °C Pirobloc HTF-MINERAL ...

Operating temperature: -6 °C - 275 °C

... HTF synthetic oil for heat transfer that can be used in any type installations with maximum outlet temperature of 275 °C boiler wall. Pirobloc HTF-HIGH FLASHPOINT is a fluid for heat transmission specially formulated ...

Operating temperature: -10 °C - 315 °C
Viscosity: 0.3 m²/s

Drum of 200 liters of synthetic thermal oil for use in indirect heat processes (-10ºC to 315ºC). Pirobloc HTF-ULTRACLEAN is a synthetic thermal oil for cleaning of systems of heat transfer in liquid ...

... viscosity of base oil ASO OIL reinforcement contains extremely fine particles of molybdenum disulphide for addition to all types of basic mineral oils forming a stable suspension. ASO ...

Operating temperature: 0 °C - 280 °C

... BAKERLUBE CL is a NSF H2 registered, ester based, high temperature, bakery oven chain lubricant with extreme pressure additives. Specifically formulated for he lubrication of bakery oven chains operating ...

Operating temperature: -30 °C - 150 °C

... performance, spray lubricant suitable for all types of drive and conveyor chains in a convenient aerosol can. The unique formula of ROCOL CHAIN & DRIVE Lubricant Spray is designed to ensure maximum ...

Viscosity: 0.00068, 0.00011 m²/s
Flash point: 200 °C

Berusynth PG 680 H1 is a high performance synthetic lubricating oil with H1 registration for the food, feed and pharmaceutical industries. Berusynth PG 680 H1 contains no allergens and is free of MOAH. Examples ...

Viscosity: 0.00046, 0.000072 m²/s
Pour point: -36 °C
Flash point: 200 °C

Berusynth PG 460 H1 is a high performance synthetic lubricating oil with H1 registration for the food, feed and pharmaceutical industries. Berusynth PG 460 H1 contains no allergens and is free of MOAH. Examples ...

Viscosity: 0.00022, 0.000039 m²/s
Pour point: -36 °C
Flash point: 200 °C

Berusynth PG 220 H1 is a high performance synthetic lubricating oil with H1 registration for the food, feed and pharmaceutical industries. Berusynth PG 220 H1 contains no allergens and is free of MOAH. Examples ...

Pour point: -27, -42, -18, -24 °C
Flash point: 178 °C - 232 °C

Lubrication and hydraulic oils with additives to improve the ageing and oxidation stability. Good wear protection, demulsifying (good water seperation), good air release properties, zinc-containing ...

Pour point: -45, -48, -36 °C
Flash point: 180, 186, 178, 240 °C

Hydraulic and lubricating oils (machine oils) with a high viscosity index and additives to improve ageing stability, corrosion protection and wear protection. The products of the RENOLIN ...

Operating temperature: 40, 15, 100 °C
Pour point: -36, -57, -48 °C
Flash point: 118, 214, 154 °C

Hydraulic and lubricating oils with extremely high viscosity index as well as outstanding cleaning properties and sludge carrying capacity. HVLPD according to DIN 51502 together with DIN 51524-HVLPD ISO ...

... Cutting Oil is used in cutting- and machining processes, for the non-aggressive drilling, cutting, punching and milling of steel, casting materials, aluminium or non-ferrous metals. The Cutting Oil features ...

Operating temperature: 30, 49 °C

... days Sprayidea Sewing Machine Oil is a multi-purpose lubricant, used for lubricating hardware, machine tools, sewing machine, metal parts, plastic mold, etc. 1.Anti-rust & moisturizing; 2.Rust ...

Operating temperature: 30, 49 °C

... Guangzhou or Hongkong Lead Time：20 days JIEERQI 188 PP OIL is widely applied to sewing. Perfect for lubricating all kinds of sewing threads including cotton, silk, polyester, nylon, blending etc. ...

Operating temperature: 49, 30 °C

... temperature. Keep well-ventilated, avoid the glue contacting with skin when using. Should be stored in well-ventilated, dark, cool, dry place. Do not store above ℃, recommended storage at below ℃. Keep the children ...