|
|
Molykote® synthetic oils are produced
through chemical synthesis to meet
targeted performance specifications and
to minimize impurities. Synthetic oils
are formulated with new generation
performance-enhancing additives.
Molykote mineral oils are produced in
a series of proprietary hydroprocessing
steps, which ensures that they are nearly
free of contaminants. Synthetic blends are
comprised of synthetic and hydroprocessed
mineral oil base stocks.
All oils in this section are available in pails
and drums.
Molykote® gearbox lubricants help prevent wear and process interruptions in power transmission
systems and components. Compared to conventional oils they also offer greater resistance to
oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils
maximize fill intervals and maintain viscosity characteristics at wide temperature ranges. Molykote
gearbox oils meet AGMA 9005-E02. In addition to AGMA, Molykote L-21XX series gearbox oils also
meet DIN 51 517 Part 3, US Steel 224, Flender, Cincinnati Machine, David Brown SL.53.101. |
|
Castrol gear oils range from lightly loaded to heavy shock loaded applications.
From conventional sulphur-phosphorus to high performance products, Castrol gear oils are for all applications. |
|
| Lubra-Gel is a high-pressure penetrating lubricant that dispenses as a penetrating oil, and then sets up as a grease-like lubricant. It contains Teflon® (a DuPont registered trademark) for excellent lubricating abilities. This product will penetrate hard to reach areas, then remain as an excellent high-impact, anti-splatter lubricant. The solvent evaporation is designed to provide this needed penetration. After penetration, the product becomes a viscous, high-impact grease that will withstand heat up to 600 degrees F. Constant temperature and pressure will break down any grease, leaving the surface unprotected until re-lubricated. Between lubrication periods, Lubra Gel provides a protective Teflon coating that ensures that the surface is never unprotected. This makes Lubra Gel the most dependable lubricant available for a complete maintenance program. It is also excellent for use on open gears, cables, chains, and sprockets. 16 oz Can / 11 oz Net Wt. |
|
| This spray lube is a non-soap, high temperature grease with excellent dispensing properties. It is a liquid when dispensed from the can, but once the solvent evaporates, it quickly sets up as a viscous grease that will withstand temperatures up to 500 degrees F. It is a non-soap synthetic grease base stock with antioxidant and anti-rust additives designed for continuous operation at high temperatures. It is specially designed for applications where the service range of conventional greases may be exceeded or cycling from normal to extremely high temperatures may occur. It has a good adhesion to metal and excellent resistance to water wash-off. Additionally, it is excellent for bearing lubrication. Ideal for hard to reach areas on conveyors, couplings, hinges, open gears and chain drives. 20 oz. Aerosol Can / 16 oz Net Wt. |
|
SKF bearing greases:
The perfect solution for every application
SKF's vast experience in the development of rolling bearings forms the basis for the development of a special range of lubricants, the superior quality of which is obtained through continuous testing and studies.
LGMT 2: SKF general purpose industrial and automotive bearing grease
LGMT 3: SKF general purpose industrial and automotive bearing grease
LGWA 2: SKF high load, extreme pressure, wide temperature range bearing grease
LGFP 2: SKF food compatible bearing grease
LGFL 1: SKF food compatible, low temperature bearing grease
LGFB 2: SKF food compatible, high load bearing grease
LGEP 2: SKF high load, extreme pressure (EP) bearing grease
LGEM 2: SKF High viscosity bearing grease with solid lubricants
LGEV 2: SKF Extremely high viscosity bearing grease with solid lubricants
LGLT 2: SKF low temperature, extremely high speed bearing grease
LGGB 2: SKF green biodegradable bearing grease
LGWM 1: SKF extreme pressure low temperature bearing grease
LGHB 2: SKF high load, high temperature, high viscosity bearing grease
LGHP 2: SKF high performance, high temperature bearing grease
LGET 2: SKF extreme temperature, extreme condition bearing grease |
|
| ... products without technical information |
| |
The Lubeplus GX is ideally suited to mechanical applications and plant used in the food processing, packaging and printing industries. Can accommodate systems with up to 200 lubrication points.
Lubeplus GX is designed to operate with a positive displacement unit (PDU) or with metering flow unit systems. The lubricator is available with a wide combination of condition monitoring features and a choice of 'with' or 'without' microprocessor control.
Gear Pump operation
Max. operating pressure 25 bar
Can use Oil or fluid grease
Available in 3 or 6 litre reservoirs.
Supply voltages 110v or 240
|
|
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
|
|
| Electrically operated Pump of 12V/24V DC It has built-in reservoir. These type of pumps are quite accepted on earthmoving equipment like shovels, dumpers, excavators, buses and trucks. These pumps have different plunger pumps which are connected to the secondary block on the chassis. Normally 3 plunger pumps are sufficient to cover 25-30 points. The pump is so designed that no foreign particle goes into its reservoir The reservoir once filled with grease is sealed with lock and key arrangement. |
|
Air/Oil lubrication is a relatively new emergent lubrication system. The recent developments in lubricant technology have expanded air/oil lubrication to dry machining applications.
The air stream, that normally operates continuously, provides both a transport for the oil to the lubrication point and cooling.
The oil-injected into the air stream at regular intervals coats the surfaces to be lubricated and reduces friction and wear.
Dropsa offers many articulated solutions to Air/Oil Lubrication - the VIP4 Family of products is the latest addiction to this range.
|
|
Ideally suited for plant in continuous operation: Steel Works, Cement Works, Rolling Mills, Large Cranes and Sewage Processing.
Designed for heavy duty performance and reliability, these multi-line radials are equipped with integral pumping units which deliver an adjustable volume of lubricant to each bearing feed line.
A maximum of 30 outlets is provided. Additional points may be covered by distribution blocks.
Radial Systems
MR/AF Range
Lubricants incl. Grade 2 grease
Ideal for larger installations such as steel works, fixed plant and coal mines
|
|
In-Line Lubricator :
In-Line Lubricators assure proper lubrication for small pneumatic hand tools. These in-line lubricators put the oil source right at the tool. Oil capacity is 1/4 oz. (1 ml) enough to last through an average 8-hour shift. This lubricator requires cyclical or intermittent airflow for proper operation, and consequently works best when installed at the tool inlet or on a short hose near the tool. |
|
Battery Driven Grease gun LAGG 400B
Quick and easy grease filling
The SKF Battery driven grease gun LAGG 400B is a high quality grease gun suitable for lubricating bearings, machines, vehicles and other applications. Ergonomically designed and user friendly, the grease gun can be used with standard SKF grease cartridges (420 ml) or filled with approximately 500 cm3 (17 US.fl.oz) of loose grease.
Compared to hand operated grease guns, a 420 ml cartridge can be emptied in approx 10 minutes with minimum effort, resulting in significant cost and time saving
-Electrical operation and the ergonomic design of hand grip helps reduce operator fatigue compared to manual methods
-Easy-to-use one hand operation makes the grease gun user friendly
-Supplied with various electrical plugs and two power supply versions (230 and 110 V charger) makes it operational worldwide
-Battery operation allows use in almost all environments without use of a mains supply
-Long battery life of 1000 charging cycles helps reduce product life costs
-Refillable: grease filling nipple and de-airing valve allow filling up by filler or grease pump
-Safety valve setting set to 40 MPa (5 800 psi) helps increase operator safety
-Supplied with M10x1 nozzle, interchangeable with SKF hoses, SKF grease meter LAGM 1000E and other accessories |
|
APPLICATION:
For lubrication at friction points on presses, stamping presses, machine tools, conveyors, etc.
FUNCTION:
By pressurizing the pneumatic cylinder the piston is lifted thus closing first the suction port. Then the lubricant inside the cap is being displaced via valve seat and ball into the piston chamber. When the piston is moving upwards, the cross bore provided, having an annular grovve, reaches the outlet ports.
These ports are not on the same level so that the lubricant is discharged alternatvely, in a premetered quantity. Relieving the pneumatic cylinders returns the piston into is initial position thus recharging the chamber between piston and cap with lubricant.
With single-line and progressive systems the total feed volume of the pump is taken from outlet "X"; through the "Y" port, in single-line systems on the other hand, the lubricant, when depressurized, is returning into the reservoir. The parameter determining the minimum pulse frequences is an empirical value dependent upon lubricant, air pressure, number of outlets, and, last but not least, piping cross- sections and length of main feed line. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Air Line Lubricator
Sizes Available: Miniature Series 1/8", 1/4" NPT, Compact Series 1/4", 3/8", 1/2" NPT, Large Series 1", 1-1/2" NPT
Air line mist lubricator distributes oil into the compressed air line, significantly increasing the life of downstream equipment such as valves and actuators.
Bowl available in transparent polycarbonate or metal zinc die cast.
Bowl capacity: Miniature: 17cc, Compact: 160 cc, Large: 1 litre |
|
| ... products without technical information |
| |
|
|
