|
|
Pallet made of a completely angled sheet blank.
Run-in from all 4 sides with fork-lift trucks and hand lift trucks.
Suitable for one 200-litre drum.
Can be stacked when empty.
Dimensions: 586 x 586 x 130 mm
Run-in height on all sides: 100 mm
Weight: 5.5 kg +/- 10%
Load-bearing capacity: 400 kg
|
|
Jumbo pallets. 3/1 stacking to triple the use of floor space.
Jumbo pallets save space when not in use.
|
|
These products are a valid alternative to the classical wooden boards in that they are stronger and can take heavier loads. The wide variety of types allows maximum flexibility in handling and storing in the most diversified production sectors thanks also to some versions with a wooden bottom. The range is completed by specific bar holder supports.
|
|
Steel flights all dimensions with edges (type PSR) or without edge (standard PS), sheet plate ribbed out of standard, load with the request, 2 to 3 skis. Achievements to measures with the request. FRENCH MANUFACTURE.
OPTIONS: Hot galvanization, fixed spillplates or dismountable etc .......
Our pallets are designed in dimensions standards (European standards) but also to measure according to your needs.
Not to hesitate not with us consult for a free estimate; Decreasing prices for quantity!
|
|
Case of reinforced handling, especially conceived for hot parts and heavy loads, 2 quadrants of stacking, perforation to accelerate cooling taken with the transpallet or lifting truck. Standard dimensions or to measure.
Case of reinforced handling, especially conceived for hot parts and heavy loads (foundries, forging mills), 2 quadrants of stacking, perforation to accelerate cooling taken with the transpallet or lifting truck. Standard dimensions or to measure. Many options possible: hot galvanization, carries label, etc...
|
|
Dimensions and load on request; 3 ribbed sheet sides; Fund ribbed; 1 large removable latticed removable side with 1/2 boltable door by 2 bolts. Clamps, foureaux or skis for retounement with the rotary head lifting truck. Cups of stacking with hole of élinguage.FABRICATION FRENCH
This container was especially designed for the storage of product cumbersome such as for example electric and electronic waste (DEEE). A large side latticed is equipped with a half carries boltable but it can also be removable thus facilitating the installation of the products to be stored. This container is to equip with passage of fork allowing the emptying of the case using a rotary head carriage
|
|
Crates of storage standardized of type VP
Detail characteristics
- Dimensions 800 X 1200 HT 500 or 600 X 800 HT 500
- Ribbed sheet metal Crate,
- Cups of stacking with hole of slinging,
- Stacking 5/1.
Options
- Partial Sealing or supplements,
- ½ door on a large side,
- Casters: 2 fixed and 2 swivelling,
- Perforation of the bottom and the sides,
- Marking with the stencil key set of the tare or a classification,
- Paint of completion to the choice,
- Door label,
- Lid,
- Clamps of passage of forks,
- Shoes on the small ones or large sides,
- Hot galvanized Completion.
|
|
Metal container of the type MANU BOX
Detail characteristics
- Ribbed sheet metal Crate,
- Quadrants of stacking on the small sides,
- Enamelled Completion green RAL 6002,
- Stacking 5/1.
Options
- Partial Sealing or supplements,
- ½ door on a large side,
- Casters: 2 fixed and 2 swivelling,
- Perforation of the bottom and the sides,
- Marking by stamping,
- Marking with the stencil key set of the tare or a classification,
- Paint of completion to the choice,
- Door label,
- Lid,
- Clamps of passage of forks,
- Other dimensions on request,
- Hot galvanized Completion.
|
|
PALL 080085
Externale Dim. 820 x 1220 x h.870 mm (wooden pallet not included)
Internal Dim. 740 x 1150 x h.850 mm
Opening:Half hinged gate on 1220 mm side
Stackability: 3 + 1
Capacity: kg 800
Finish: Bright electro zinc plate
Accessories Printed and welded plate
Other measures available
|
|
Grill containers
adapted for the transport of parts
handling with a fork lift or a jack lift
reliable stackability
gril container for the supply of parts at the working station
Big grill container
External dimensions : Length : 1240 / Width : 835 / Height : 970mm
Internal dimensions : Length : 1200 / Width : 800 / Height : 800 mm
Small grill container
External dimensions : Length : 835 / Width : 640 / Height : 670mm
Internal dimensions : Length : 800 / Width : 600 / Height : 500 mm
|
|
SLI 760 & SLI 1200
These containers of which the thickness of steels is important are mainly used for the conditioning of strong loads. They consist of a tack welded base and 4 removable panels by bolts supporting ergonomics and making it possible the operator to penetrate in the container by the side. The handling of the panels and the retraction of the container are done without tractive effort. The perforated sheet bottom allows the water run-off and answers favorably your requirements of protection fire
- Stacking folded and unfolded by centering pins
- Folding with vacuum
- 1 small and 1 large side with opening half
- Shoes on small sides
- EP Galia
|
|
This packing ensures the storage and the logistics of various parts. They are appropriate for the presentations and rotations for the work station or in edge of line. The fact that they are folding with vacuum optimizes logistic flows with vacuum.
Largest of them are appropriate for the bulky parts and replace the specific containers.
They consist of:
- Of a tack welded base equipped with 4 shoes ensuring of handling in full safety,
- Of a floor wood brought back in the content,
- Of an entourage made up of 4 posts and 4 latticed panels.
|
|
| ... products without technical information |
| |
|
|
