|
|
|
|
|
|
The model 2542 dual channel Digital Storage Oscilloscope delivers an unmatched combination of performance and value. Analog style controls combined with an Auto measurement function make this oscilloscope easy to use. Advanced features such as FFT function, digital filtering, waveform recorder, delayed sweep/zoom, mask testing and automatic measurements provide you with powerful tools to debug your circuits. The 2542 is an ideal oscilloscope for use in education and training, design and debug, service and repair.
* 100 MHz bandwidth, 1GSa/s sample rate
* 4000 point record length for each channel
* Color LCD display
* Front panel USB host port for USB flash drives standard
* Advanced analysis tools include digital filter with adjustable limits, mask testing and waveform recorder/replay mode
* FFT standard plus 3 additional math functions
* Extensive Trigger capabilities including pulse width and line-selectable Video trigger
* PC Software that lets you remotely control the oscilloscope and capture, save and analyze waveform data
* Two 150 MHz high performance passive probes included
|
|
|
Staying competitive in the design and development of today's electronics industry requires measurement tools that meet your performance needs AND budget. Agilent Technologies is a recognized industry leader with a long tradition of delivering reliable, high-performance award-winning oscilloscopes that help you design, debug and validate your designs. Whether you need a handheld tester or a 13 GHz digital signal analyzer, Agilent has the scope for you.
|
|
|
|
|
|
* High-performance 8 bit transient recorder
* 4 simultanous channels with 100 MS/s
* 2 simultanous channels with 200 MS/s
* Systems up to 64 x 100 MS/s 8 bit A/D available
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 4 GSample memory
* 7 input ranges between ±50 mV and ±5 V
* Input offset up to ±400%
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* ABA mode available as an option
The four models of the M2i.20xx series are designed for the fast and high quality data acquisition. Each of the up to four input channels has its own A/D converter and its own programmable input amplifier. This allows to record signals on all channels with 8 bit resolution without any phase delay between them. The inputs can be selected to one of seven input ranges by software and can be programmed to compensate an input offset of ±400% of the input range.
The extremely large on-board memory allows long time recording even with highest sampling rates. A FIFO mode is also integrated on the board. This allows to acquire data continuously for online processing in the PC or for data storage on hard disk.
|
|
|
|
|
|
* 14 bit transient recorder
* Two channels with 250 MS/s
* High dynamic range
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 6 input ranges between ±100 mV and ±5 V
* 50 Ohm/1 MOhm, AC/DC, bandwidth filter software selectable
* Automatic on-board calibration
* Synchronisation to multi-board system possible
The 6 models of the M3i.41xx series are designed for the fast and high quality data acquisition. Each of the input channels has its own monolithic A/D converter and its own programmable input amplifier. This allows to record signals simultaneously on both channels with 14 bit resolution without any phase delay between them. The extremely large on-board memory allows long time recording even with the highest sampling rates. All boards of the M3i.41xx series may use the whole installed on-board memory for the currently activated number of channels. A FIFO mode is also integrated on the board. This allows the acquisition of data continuously for online processing or for data storage to hard disk.
|
|
|
|
|
|
* 14 bit transient recorder
* One channel with 400 MS/s
* Monolithic A/D converter (no interlace)
* Two channels with 250 MS/s
* High dynamic range
* Up to 2 GSample memory
* 6 input ranges between ±100 mV and ±5 V
* 50 Ohm/1 MOhm, AC/DC, bandwidth filter software selectable
* Automatic on-board calibration
* Synchronisation to multi-board system possible
* 32 Bit 66 MHz PCI/PCI-X interface available
* PCI Express x1 Interface available
The 6 models of the M3i.41xx series are designed for the fast and high quality data acquisition. Each of the input channels has its own monolithic A/D converter and its own programmable input amplifier. This allows to record signals simultaneously on both channels with 14 bit resolution without any phase delay between them. The extremely large on-board memory allows long time recording even with the highest sampling rates. All boards of the M3i.41xx series may use the whole installed on-board memory for the currently activated number of channels. A FIFO mode is also integrated on the board. This allows the acquisition of data continuously for online processing or for data storage to hard disk.
|
|
|
|
|
|
* 12 bit transient recorder
* 2 synchronous channels with seperate A/D
* 100 MS/s on 2 channels
* Up to 256 MSample memory
* 6 input ranges between ±200 mV and ±10 V
* FIFO mode up to 50 MS/s sum samplerate
* Input offset up to ±100%
* Automatic offset calibration
* Synchronisation to multi-board system possible
* 32 Bit CompactPCI 6U interface
* Compatible with 3,3V and 5V PCI I/O-Voltage
The MC.30xx series offer a wide range of very fast 12 bit A/D converter boards for CompactPCI 6U bus. Due to the well-planned design these boards are available in several versions and different speed grades. That makes it possible for the user to find a individual solution.
These boards offer one to four channels with a maximum sam-plerate of 200 MS/s. As an option 4 digital inputs per channel could be recorded synchronously. The installed memory of up to 256 MSample will be used for fast data recording. It can completely be used by the currently active channels. If using slower samplerates the memory is switched to a FIFO buffer and data will be transferred online to the PC memory or to hard disk.
Several boards of the MC.xxxx series may be connected together by the internal standard synchronisation bus to work with the same time base.
|
|
|
|
|
|
* 14 bit A/D + 16 bit digital with 50 MS/s
* Optimized for RADAR applications
* acquisition of azimuth and elevation angle
* 32 Bit 66 MHz PCI interface available
* PCI Express x1 interface available
* Up to 2 GSample memory
* 6 input ranges between ±200 mV and ±10 V
* Input offset up to ±200%
* Window/pulse width/re-arm/OR/AND trigger
* Automatic offset calibration
* Synchronisation to multi-board system possible
* Synchronous digital channels and ABA mode available as an option
The both cards of the M2i.40x8 series combine fast A/D data acquistion with the feature to acquire digital data in parallel. With this feature it is possible to either acquire 16 digital bit in parallel from one or more angle decoders or acquiring one or two encoder signals directly by using internal counters. Digital data is either stored continuously and synchronously with the analog data or as an angle marker with each data segment (Option Mutliple Recording needed).
Digital data can be either acquired fully in parallel or as a combination of a counter input and parallel digital data. The acquisition
mode can be programmed by software.
When operating in continuous mode the analog and digital data is stored alternating in the on-board memory. For each 14 bit analog sample there is one corresponding 16 bit digital sample.
When operating in segmented marker mode there is one 16 bit digital sample stored at the end of each acquired segment holding the azimuth
and elevation angle for this segment of analog data.
Acquisition can run with full sampling speed independant of the selected mode.
|
|
16 bits vertical resolution
• 2 or 4 digitizing channels
• 100 or 200 MS/s maximum sampling per channel
• 128 MS to 2 GS on-board acquisition memory
• 65 or 125 MHz bandwidth
• Full-size, single-slot PCI card
• Full-featured front-end, with software control with input ranges, coupling and impedances
• Input ranges between ±100 mV to ±50 V
• 32 bits, 66 MHz PCI standard for 200 MB/s transfer to PC memory
• Ease of integration with External or Reference Clock In and Clock Out, External Trigger In and Trigger Out
• Programming-free operation with GageScope® oscilloscope software
• Software Development Kits available for LabVIEW, MATLAB, C/C# and Linux
The RazorTM family of multi-channel digitizers features up to 4 channels in a single-slot PCI card with up to 200 MS/s sampling per channel, and up to 4 GB of on-board acquisition memory.
Combine several Razor cards for up to 32 channels in a single system.
For Realtime Applications eXpert Options:
• eXpert™ FIR Filtering Firmware Option
|
|
# B K Precision Model 2190B is one of the most economical 100 MHz analog oscilloscopes on the market, yet it has all of the high performance features needed for most applications, including delayed time base, bandwidth limiter, and Y axis output. This oscilloscope is built by and backed by B K Precision, a company that has been selling reliable, durable, value priced test instruments for over 50 years. Dual time base oscilloscope (2 channel)
# 5mV/division sensitivity
# Sweeps to 5ns/division
# 23 calibrated ranges, main time base
# Signal delay line
# 15 kV accelerating voltage
# Channel 2 output
|
|
# B+K Precision's model 2120B is a dual trace oscilloscope that offers high performance at a low price. Most competitor's entry level oscilloscopes have a 20 MHz bandwidth, while B+K Precision's models 2120B has a bandwidth of 30 MHz. This oscilloscope is built by and backed by B+K Precision, a company that has been selling reliable, durable, value priced test instruments for over 50 years. Dual or single trace operation
# 5 mV/div sensitivity
# AUTO/NORM triggered sweep operation with AC, TVH, TVV and line coupling
# Compact low profile design
|
|
|
|
|
|
The 2530 Digital Storage Oscilloscope delivers essential features and reliable performance at a price you can afford. Analog style knobs and controls combined with a smart Autoset function make this oscilloscope easy to use. Advanced triggering, automatic measurements and FFT functions provide you with many options to debug your circuits. Additionally, the instrument comes with PC Software that lets you easily capture, analyze and document waveforms and measurement results. The 2530 is an ideal education and training tool and also well suited for applications in service and repair.
* 25 MHz bandwidth, 250MSa/s sample rate
* One touch automatic setup for ease of use (Auto)
* 4000 point record length for each channel
* Cursors with readouts
* Eleven automatic measurements
* FFT standard plus 4 additional math functions
* Extensive Trigger capabilities including Pulse Width and line-selectable Video trigger
* Save/Recall setup and waveform data
* Transfer waveform data, screen shots and measurement results to a Windows PC via USB port. Analyze measurement results “off-line” or in real-time
|
|
|
|
|
|
The model 2540 dual channel Digital Storage Oscilloscope delivers an unmatched combination of performance and value. Analog style controls combined with an Auto measurement function make this oscilloscope easy to use. Advanced features such as FFT function, digital filtering, waveform recorder, delayed sweep/zoom, mask testing and automatic measurements provide you with powerful tools to debug your circuits. The 2540 is an ideal oscilloscope for use in education and training, design and debug, service and repair.
* 60 MHz bandwidth, 1GSa/s sample rate
* 4000 point record length for each channel
* Color LCD display
* Front panel USB host port for USB flash drives standard
* Advanced analysis tools include digital filter with adjustable limits, mask testing and waveform recorder/replay mode
* FFT standard plus 3 additional math functions
* Extensive Trigger capabilities including pulse width and line-selectable Video trigger
* PC Software that lets you remotely control the oscilloscope and capture, save and analyze waveform data
* Two 150 MHz high performance passive probes included
|
|
|
|
|
|
Product ID: GDS-1022, 1042, 1062, 1102
or
GDS-1102,100MHz, 2-Channel 100MHz, 2-Channel Lightweight Di
GDS-1022 , 25MHz, 2-Channel Digital Storage Oscilloscope wi
or
2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display ( GDS-1022, 1042, 1062, 1102)
100MHz, 2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display
FEATURES
100 MHz Bandwidth
2 Input Channels
250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
4k Memory Length per Channel
Peak Detect as Fast as 10ns
Save/Recall of 15 Front Panel Settings & Waveforms
5.6" TFT Color Display
19 Auto Measurements
Timebase Range: 1nS ~ 10nS/div
USB Port for PC Connection
Math Operators - Add, Subtract, FFT
6-Digit Real-Time Frequency Counter
Selection Guide:
GDS-1022 25MHz, 2-Channel Lightweight Digital Storage Oscilloscope
GDS-1042 40MHz, 2-Channel Lightweight Digital Storage Oscilloscope
GDS-1102 100MHz, 2-Channel Lightweight Digital Storage Oscillosocpe
GDS-1062 60MHz, 2-Channel Lightweight Digital Storage Oscilloscope
Specifications:
GDS-1102
SPECIFICATIONS
VERTICAL
Channels 2
Bandwidth DC ~ 100MHz (-3dB)
Rise Time <3.5ns Approx.
Sensitivity 2mV/div ~ 5V/div (1-2-5 increments)
Accuracy
±(3% x |Readout|+0.1 div 1mV)
Input Coupling AC, DC & Ground
Input Impedance
1M±2%, ~16pF
Polarity Normal & Invert
Maximum Input
300V (DC AC peak), CATII
Waveform Signal Process , - , FFT
Offset Range
2mV/div ~ 50mV/div : ±0.4V
100mV/div ~ 500mV/div : ±4V
1V/div ~ 5V/div : ±40V
Bandwidth Limit 20MHz (-3dB)
TRIGGER
|
|
World-class digital oscilloscopes form Yokogawa: The digital oscilloscopes have high-speed sampling and a wide range of bandwidths that can be utilized for design and development of electronic devices. The ScopeCorders have the advantages of both a digital oscillosope and a multi-channel data recorder.
DL9040/ DL9140/ DL9240 Series Digital Oscilloscopes
Affordable and Powerful 500 MHz/1 GHz/1.5 GHz solutions
Flexible acquisitions using a Xth generation scope
Serial bus analysis function (CAN LIN, I2C, SPI)
USB2.0 Compliance Test Soution
DL9000 Series MSO Models (Mixed Signal Oscilloscopes)
High performance and compact Mixed Signal Oscilloscope with 1GHz/500MHz bandwith 4 analog channels and 16/32-bit Logic input
DL7440/DL7480 Digital Oscilloscopes
The 7400 series is designed to make complex measurement easy.
Serial bus analysis function (I2C, CAN, and SPI)
500 MHz, 2 GS/s, 16 MW, 4 or 8 analog channels and 16-bit logic input
|
|
|
|
|
|
WaveExpert Series Sampling Oscilloscopes
WaveExpert 100H
WaveExpert 100H - The Complete Workstation for Optimizing Serial Data Signal Integrity
In recent years, the rates of serial data signals have increased steadily from 2.5 Gb/s to 40 Gb/s and beyond. All this speed, of course, pushes up the bandwidth requirements of oscilloscopes. However simply providing this bandwidth is not sufficient for qualifying these high-speed links. High bandwidth oscilloscopes must have the detailed analysis capability required by next-generation standards. Adding to the measurement complexity is the emergence of receiver equalization which allows high-speed serial data links to operate error-free even when the signal is severely distorted. The WaveExpert 100H is the ideal signal integrity analysis solution for these applications.
Eye pattern analysis is the primary method of signal integrity testing for optical signals and the WaveExpert performs this analysis over 20 times faster than conventional sampling oscilloscopes.
Optical signal testing requires high bandwidth and low jitter and the WaveExpert 100H with the highest available electrical bandwidth up to 100 GHz along with the 230 fs jitter noise floor of the HCIS timebase is an ideal solution.
|
|
-
Maximum 16 MW recording memory
-
USB compliant
-
Ethernet connectivity (optional)
-
User-defined math (optional)
-
2 GS/s maximum speed
-
500 MHz analog bandwidth
-
Supports 250 MHz logic probe
-
PC card interface (Type II)
-
Power supply analysis function (optional)
-
Serial bus analysis function (optional)
|
|
|
|
|
|
Fluke 225C et 215C – ScopeMeter couleur avec test de bus industriels
Les ScopeMeters couleur 225C et 215C offrent toute la palette de fonctionnalités des modèles 199C et 196C. Ils les enrichissent en outre de puissantes capacités de mesure dédiées au contrôle des bus industriels les plus répandus. En mode BusHealth, ces ScopeMeters soumettent automatiquement les signaux électriques véhiculés par le bus à une analyse approfondie. Les paramètres mesurés sont ensuite comparés aux valeurs normalisées prescrites pour le type du bus sous test. L'utilisateur peut aussi sélectionner l'affichage du « diagramme de l'œil » et contrôler visuellement la qualité globale du signal.
Les paramètres mesurés sont automatiquement définis comme « bons », « faibles » ou « mauvais » en fonction des normes correspondantes ou des valeurs de référence définies par l'utilisateur. Chaque paramètre est présenté avec sa valeur actuelle, accompagnée de statistiques MIN-MAX relevées dans le temps. Les valeurs de référence également indiquées aident l'utilisateur à cerner plus aisément le comportement du système. L'appareil mesure notamment l'amplitude des signaux, la tension de polarisation, les temps de montée et de descente, la gigue, la distorsion et les niveaux de bruit (bruit intra-bande et hors bande), selon les spécificités de la norme industrielle concernée.
|
|
|
|
|
|
1 digitizing channels
• 4 GS/s maximum sampling rate
• 8 bits vertical resolution
• 256 MS to 4 GS on-board acquisition memory
• 1.5 GHz bandwidth
• 7.6 bit ENOB
• Full-size, single-slot PCI card
• Full-featured front-end, with software selection of all signal conditioning settings
• 32 bits, 66 MHz PCI standard for 200 MB/s transfer to PC memory
• Ease of integration with Reference Clock In and Clock Out, External Trigger In and Trigger Event Out
• Programming-free operation with GageScope® oscilloscope software
• Software Development Kits available for LabVIEW, MATLAB, C/C# and more
The CobraMax CompuScope family of GaGe ultra high-speed 8-bit digitizers provides the most powerful combination of speed, memory, and bandwidth as well as a wide portfolio of advanced acquisition features.
The GaGe CobraMaxTM family of digitizers features up to 2 channels in a single-slot PCI card with up to 4 GS/s sampling per channel, and up to 4 GB of on-board acquisition memory. Combine several CobraMax cards for up to 16 simultaneous channels in a single system.
|
|
ScopeMeter® 190 Series: Speed, performance and analysis power
For the more demanding applications, the ScopeMeter 190 Series high-performance oscilloscopes offer specifications usually found on top-end bench instruments. With up to 200 MHz bandwidth, 2.5 GS/s real-time sampling and a deep memory of 27,500 points per input they're ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery powered instrument.
|
|
The OX 8042 differential input oscilloscope has an integrated FFT function and, more importantly, harmonics analysis capability. The fundamental is detected even on complex signals such as PWM signals. The OX 8042 has the added advantage of a unique level of safety. Without any danger, at any time, you can switch back to normal mode by simply pressing a button.
# Bandwidth:
- digital mode: 40MHz
- analogue mode: 20 MHz
# 2 differential channels - 2 BNCs/channel
# Sensitivity from 10mV to 200V/div. (14 calibrated positions)
# Sampling rate
100MS/s in single-shot mode
20GS/s in repetitive mode
# Memory: 2x(1, 8 or 16KB) + pre-triggering
# GLITCH, ENVELOPE and EADJ (METRIX DOT-JOIN) modes
# AUTOSET function
# 5 cursors and 17 automatic measurements
# RS 232 link as standard
# Direct printing via RS 232 and Centronics
# Safety: IEC 61010, Cat.III, 300V / Cat.II, 600V
# Dimensions 435x330x163mm, weight 7 kg
|
|
OX 7102-C Oscilloscopes
The Oscilloscope Model OX 7102-C is the perfect tool for both laboratory and field testing.
Ease-of-use of the instrument is facilitated through 33 specialized keys for direct access to commonly used functions. Ideal for field use, the Oscilloscope Model OX 7102-C utilizes the patented new system of plug-and-play accessories, individual isolation of each of the measurement channels, a range of remote management capabilities based on an Ethernet link with web server, a number of built-in instruments, including a four channel TRMS multimeter.
The large 320 x 240 full color LCD screen provides detailed graphical and alphanumerical representations of all measurements and also functions as a touch screen. Using the convenient stylus, the various “Windows-like” menus can be opened or pulled down and executed. The stylus can also be used for direct action on graphic elements such as cursors, triggers, zooming, etc.
|
|
|
|
|
|
The latest additions to the MTX Compact family of laboratory instruments from Metrix, the MTX 3252 and MTX 3352 digital oscilloscopes show the same daring as their two precursors: the MTX 3250 benchtop multimeter and the MTX 3240 generator.
Centred on the user’s environment, their compact casing is equipped with a wide, orientable monochrome or colour LCD screen and provides a very large useful surface area
21 shortcut keys on the front offer direct access to the main functions. The instruments can also be controlled on the screen, using a mouse and "Windows-like" menus. A world first for this category, just like their Ethernet link (e-MTX models)!
The technological specifications of the MTX Compact are as good as its ergonomics, while the price remains really attractive!
# 5"7 monochrome or colour LCD display
# CCFL backlighting - 4 graphs + 4 references on screen
# Bandwith 60-100MHz - 2 channels class 1- Cat II 300V
# Sensitivity 25mV-100V/div + "Winzoom" vertical expansion
# Sweep speed from 1ns to 200s/div.
# Auto, Normal, One-Shot trigger - CH1, CH2, EXT, LINE
# Max. sampling 20GS/s = repetitive;
100MS/s = single shot
# Capacity 50,000 points - 4 references + 4 graphs of 50k
# GLITCH, ENVELOPE, AVERAGING, DIGITAL XY
# Complete autoset, FFT, MATH, V/T/Phase cursors, 18 automatic measurements
# Logger, harmonic analyzer and Ethernet port available as options
# Dimensions (HxWxD): 170x270x190mm - Weight: 2.5kg
|
|
Setting new performance standards, the Sigma series integrates high accuracy signal acquisition, extensive analysis capabilities and a full featured WindowsTM PC in an affordable compact family of products. Whether it's the 12-bit high resolution Sigma 30, the high speed 8-bit Sigma 75, the mixed mode Sigma 90 or even the high speed and high resolution Sigma 100, LDS-Nicolet offers capabilities normally reserved for high end digital oscilloscopes.
All Sigma models have a 10.4" SVGA color touch-screen display, a sophisticated array of real-time measurements, 100 baseT, PCI expansion slot, USB, SVGA output, PC audio in/out, mic in, RS-423 and parallel interfaces in an integrated Windows XP PC. Sigma series scopes have a standard active IntelliProbe interfaces which seamlessly integrate probe ID, scaling and power. The optional Synchroscope® Module which enables rotational measurements and independent dual monitor mode make a Sigma series transient scope a versatile choice.
|
|
DSA8200 Digital Serial Analyzer Sampling Oscilloscopes
DSA8200 Digital Serial Analyzer Sampling OscilloscopesThe DSA8200 digital serial analyzer sampling oscilloscope is the first tool to provide complete Serial Data Link Analysis (SDLA) capability and remains your time- and cost-effective choice for signal path characterization.
As the leader in the market for TDR-based solutions, the DSA8200 gives you the greatest performance for serial data network analysis applications - TDR performance, S-parameter bandwidth, signal fidelity, and RMS noise. And as the leader, it also gives you the versatility for characterization and conformance testing of emerging high-speed computer and communications electrical and optical signals.
|
|
PicoScope handheld oscilloscopes convert your laptop or desktop PC into a powerful oscilloscope, spectrum analyzer and meter without the need for additional probes or power supplies.
The PicoScope 2104 and 2105 are portable handheld oscilloscopes that are ideally suited for use by hobbyists, students, technicians, and anyone looking for an easy-to-use, affordable, single-channel PC oscilloscope.
The small size of PicoScope handheld oscilloscopes makes them ideal for portable use, while still including the powerful features normally found in larger oscilloscopes.
* Ergonomically designed to fit in the hand
* Up to 100 MS/s real-time sample rate
* Up to 2 GS/s repetitive signal sample rate
* Up to 25 MHz bandwidth
* Up to 24,000 sample buffer memory
* Connected and powered by USB
|
|
Setting new performance standards, the Sigma series integrates high accuracy signal acquisition, extensive analysis capabilities and a full featured WindowsTM PC in an affordable compact family of products. Whether it's the 12-bit high resolution Sigma 30, the high speed 8-bit Sigma 75, the mixed mode Sigma 90 or even the high speed and high resolution Sigma 100, LDS-Nicolet offers capabilities normally reserved for high end digital oscilloscopes.
|
|
If you need to measure high-speed electrical signals, the PicoScope 9000 Sampling Oscilloscopes deliver the ultimate price/performance.
At prices starting from under £6000 (about $10000 / €7500) – less than half the price of comparable sampling oscilloscopes – the PicoScope 9000 Series has all the features and performance you need at a price you can afford. Unlike other manufacturers, all software functionality is included in the cost of the oscilloscope, and software updates are provided free of charge for the life of the product.
Designed specifically for the complex task of analysing high-speed electrical signals, PicoScope 9000 Sampling Oscilloscopes are ideal for many advanced applications including: signal analysis, timing analysis, testing and design of high-speed digital communication systems, network analysis, semiconductor testing, and research and development.
|
|
Looking for something to replace that bulky benchtop oscilloscope?
A high-performance PC Oscilloscope from the PicoScope 5000 Series is your ideal choice.
As well as a 2-channel USB Oscilloscope, the PicoScope 5000 Series can also be used for high-speed data acquisition and includes an arbitrary waveform generator that can generate a waveform of almost any shape.
Other oscilloscopes at this price range force you to compromise on either bandwidth, sampling rate or buffer memory. With class-leading bandwidth, sampling rate and memory depth, and an array of advanced high end features, PicoScope 5000 PC Oscilloscopes give you the features and performance you need without compromise.
When performance is paramount, a PicoScope 5000 high-performance oscilloscope meets your needs.
* 250 MHz bandwidth
* 1 GS/s real-time sample rate
* 128 Megasample buffer memory
* Arbitrary waveform generator
|
|
MSO4000 Series Mixed Signal Oscilloscopes
MSO4000 Series OscilloscopesVisualize analog and digital signals on one instrument. The MSO4000 Series is a powerful oscilloscope with logic analyzer functionality.
Its familiar oscilloscope operation, large display and innovative user-friendly features have been designed to make your work easier. Add to this industry-leading specifications and you have the ultimate all-in-one debug tool for embedded design.
|
|
Specifications:
* LF-190E 60MHz :
- 60 MHz Oscilloscope Probe
- ITEM 10 : 1 Bandwidth
- DC~40MHz( +/- 1dB), DC~60MHz(+/-3dB)
- Item: 1: 1
- DC~3MHz(+/-1dB), DC~6MHz(+/- 3dB)
- Input R 10: 1 =10M Ohm = 22pF
- Input R 1:1 =1M Ohm (Oscillosocpe) = 180pF
- Input C : at Oscilloscope Input 20pF
- ATT Ratio : 1 / 10 ; 1 / 1
- MAX Input Voltage DC 600V
* LF-210E 100MHz :
- 100 MHz Oscilloscope Probe
- ITEM 10 : 1 Bandwidth
- DC~60MHz (+/- 1dB), DC~100MHz( +/-3dB)
- Item: 1: 1
- DC~6MHz (+/- 3dB)
- Input R 10: 1 =10M Ohm
- Input R 1:1 =1M Ohm (Oscillosocpe) = 150pF
- Input C : 10:1 =14pF / 1:1 150pF at Oscilloscope Input 20pF
- ATT Ratio : 1 / 10 ; 1 / 1
- MAX Input Voltage DC 600V
* LF-250 250MHz :
- 250 MHz Oscilloscope Probe
- ITEM 10 : 1 Bandwidth
- DC~250 MHz(+/- 1dB)
- Item: 1: 1
- DC~6MHz( +/- 3dB)
- Input R 10: 1 =10M Ohm
- Input R 1:1 =1M Ohm (Oscillosocpe)
- Input C : 10: 1 =14pF/ 1:1 = 150pF at Oscilloscope Input 20pF
- ATT Ratio : 1 / 10 ; 1 / 1
- MAX Input Voltage DC 600V
|
|
|
|
