|
|
PPH 308 - Automatic bell spraying with rotating bell
The PPH 308 automatic bell atomizer use centrifugal force to ensure uniformity, deep penetration and spraying.
With their spraying fineness, transfert efficiency and ease of implementation and adjustment, the PPH spray guns guarantee both a high level of productivity and a superb quality finish.
The PPH 308, equipped with magnetic turbine has been designed for the electrostatic application of water or solvent-borne liquid paints in general industry.
Equipped with EC 65 bell specially designed for the application of high solids and metallic paints electrostatically.
|
|
Iso-Flo® HD Voltage Block System for Waterborne Electrostatics
Patented Iso-Flo® HD voltage blocks provide enhanced reliability and performance for the application of electrostatically charged waterborne coatings.
Heavy-duty pumps, rugged steel cabinets and air-gap isolation of coating materials provide superior productivity and safety.
Iso-Flo HD voltage blocks are available for automated and manual painting systems.
|
|
Rotary Atomizers
The production-proven, patented Nordson RA-20 and RA-20R rotary atomizers deliver painting efficiency and superior finishing quality and operating safety for a wide range of finishing applications. With no minimum sparking distance, they can be positioned close to parts for optimal coverage and minimal overspray. The fine atomization and soft spray apply thin, controllable film builds with minimal paint bounceback.
With an internal powder supply (IPS), the RA-20R rotary atomizer features lightweight, flexible low-voltage cables that experience less wear in robotic applications.
Close-in painting for superior performance
Excellent spray-pattern control
Sprays a variety of coating materials
Air-bearing turbine ensures reliability
FM-listed as non-incendiary
Patented atomizing cup design for operating versatility
Choice of power supplies for operating flexibility
Easy retrofit to existing painting systems
|
|
Benefiting of KREMLIN REXSON know-how and field experience since 1925, the new Xcite™ gun becomes an extension of the operator’s hand to bring him comfort and well being. Its ergonomy (design, ultra-light trigger, swivel fitting) reduces operator fatigue, increases productivity and prevents any RSI ( Repetitive Strain Injury).
New Xcite™ gun uses the highest quality components for long lasting reliable performances. Xcite™ last generation aircap brings unsurpassed finish quality with a 86% transfer efficiency.
|
|
|
|
|
|
COBRA 1 & 2 spray guns - are available with Trans-Tech® (Compliant & HVLP) Atomisation for optimum output and Paint Savings... Fitted with the very latest advances in EPA compliant Transfer-Technology - COBRA provides considerable paint savings whilst producing the highest levels of atomisation, high speed application with flow rates of up to 600cc/min or more. Such exceptionally efficient atomisation and material transfer ensures optimum coverage and paint usage while complying with the toughest EPA legislation.
COBRA "Advanced Conventional" - air caps outperform the rest with uniquely designed high capacity airflow and outstanding atomisation characteristics coupled with excellent product features. COBRA's Advanced Conventional Air Caps makes them the ideal guns for small operations or high volume industrial spraying. Advanced Conventional Atomisation will operate and atomise the most difficult spray materials, but will not produce the paint savings as seen with Trans-Tech Atomisation Technology.
|
|
|
These automatic guns are used e.g. for quality control to mark deficiencies. Dots with diameters of 3 to 30 mm or lines are possible. Extremely short switching time (open, spraying, close) in the range of 25 to 30 milliseconds is optimal for productions with high cycle times. Guns with flushing devices can also be ordered. A large selection of nozzle sizes: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm Ø is available. WALTHER PILOT offers complete paint marking systems with pressure tanks, compressed air fittings, solenoid valves and hoses. 10 years of delivery guarantee for spare parts.
|
|
PILOT Trend can be delivered with gravity-feed cup or connection to pressure tanks and/or pumps. The high-precision WALTHER PILOT air cap technology is a guarantee for excellent spraying results.
Choice of two versions:
- Conventional spray gun
- Medium-pressure gun (MD) for high transfer efficiency and material savings
Large selection of nozzle sizes:
0.5 – 0.8 – 1.0 – 1.2 – 1.5 – 1.8 – 2.0 – 2.5 mm ø
Nozzle and needle: stainless steel. Gun body: aluminium. Low weight: 450 grams
Ergonomically designed handle. Equally suitable for right-hand or left-hand use. PTFE quick-change packing, adjustable from the outside. Spare parts are guaranteed to be available for 10 years.
|
|
ITW Ransburg expands the Vector line of manual electrostatic spray guns with the introduction of the Vector AA90
The Gun combines superior airassisted airless atomisation technology with powerful electrostatic features, all in one gun. This integration results in a comfortable, lightweight gun with superior spray pattern characteristics, unmatched 'on gun' fan pattern adjustability with extraordinary high transfer efficiencies.
|
|
The Vector Solo AA combines airassisted airless technology with proven atomization in a portable, cordless model. With superior Ransburg electrostatics, this gun delivers advanced spray pattern characteristics, unmatched pattern adjustability and extraordinary transfer efficiency.
Solo’s cordless design increases flexibility. Operators have a greater range of movement to achieve consistent applications. The superior
ergonomic balance improves user comfort and lessens fatigue for an
increase in productivity.
Vector Solo AA’s efficiency, convenience and versatility helps to lower your bottom line.
|
|
Vector SOLO
Our World Famous Electrostatic Technology comes up with a new Cordless Gun that stands out – And Alone – in the liquid coating Industry.
Vector Solo is the result of years of work to develop a cordless electrostatic gun worthy of the Ransburg name and the quality tradition we’ve upheld world wide.
This new low pressure spray gun represents an extraordinary accomplishment
representing significantly improving paint atomisation, transfer efficiency, durability and operator comfort with complete compliance with European Environmental Legislation.
• Cordless portability and convenience
- no generators or controllers
• Superior atomisation and transfer efficiency
• Lighter weight with superior ergonomic balance
• Quick and easy to set up „straight from the box“
• Lower running costs and maintenance.
|
|
Ultra
Dual-Skin Downdraft Paint Booth
The Ultra downdraft spray booth has become the standard by which all other dual-skin booths are judged, and with good reason. With literally thousands of Ultra booths in daily operation all over the world, the GFS Ultra downdraft is our most popular paint booth. Featuring our exclusive CAF Controlled Air Flow ceiling design, high-efficiency Ultra heat system, and optional equipment such as VFD's and AdvanceCure, the Ultra is the paint booth that can help your shop hit new levels of productivity, and achieve the best quality finishes.
- 12 high-efficiency 6-tube light fixtures
- 8 lights integrated into CAF Ceiling, 4 sidewall lights
- Dual-skin white pre-coated insulated panel construction
- 4-wing dual-skin insulated entry doors with drive-thru options
- Single-row exhaust pit standard, with three-row or raised basement options
|
|
|
|
|
|
Crescocito CLA 80
Automatic spray gun for fixed and robot/reciprocator installations
External design for easy cleaning and unchanged TCP when changing from other brands of guns. Gun body, cylinder housing and cylinder cap made in high grade stainless steel for extended life time.
Internal designs for retention free inter face to gun adapters and fluid nozzle. This reduced the time for cleaning and colour change. Very low usage of cleaning agents/solvents needed per cleaning compared with other brands.
Indexed air cap positions for high repeatability and accuracy.
SEAVA tested performance on guns and air caps. (www.seava.com)
Suitable for all types of paint materials, from water based to solvent and UV materials.
CLA 80 is able to handle very small paint flows when used in combination the Crescocito Pressure Regulator, CPR 08.
Materials used in CLA 80 S:
Gun body: Stainless Steel
Paint needle: Stainless Steel, Tungsten Carbide
Paint nozzle: Stainless Steel, Tungsten Carbide
Air caps: Stainless Steel, Treated aluminium
O-rings: Perflour rubber, Viton
Sealings: UHMW, Perflour rubber
Nozzle sizes: 0,5 mm - 2,7 mm
Weight: 980 gram
Part number: 217 070 050
Approvals: CE; Atex
|
|
|
M22 P HTV: The HTV gun - flat fan - (Vortex technology) is recommended for applying low viscosity materials to difficult to reach areas
|
|
|
Graco offers a variety of manual and automatic air spray, HVLP, airless conventional, compliant and electrostatic spray guns and systems.
|
|
|
|
|
|
Strict environmental conditions in more and more countries restrict or prohibit the use of conventional high pressure paint guns. As a result, HVLP or RP spray guns are the technology of the future. Both technologies offer significant advantages. SATA HVLP spray guns are distinguished by high transfer efficiency that save large quantities of expensive paint material. SATA RP (reduced pressure) spray guns feature optimized high pressure. Their transfer efficiency is only slightly lower than SATA HVLP spray guns and they provide an easy change from conventional high-pressure spray guns to more efficient spray guns. They conform to VOC legislation as well as convey the "high pressure feeling" to the painter.
SATA HVLP spray guns are easily recognized by the green air cap ring and SATA RP spray guns by the blue ring. It doesn't matter which technology you choose. With SATA you can be assured you have a first class tool in your hand.
With our Spray-Disc we can help you choose the right spray gun online.
|
|
The standard features of Binks MX4/12 and MX4/32 Air Assisted Airless & Airless pumps position them as the premier choice for high speed surge free paint delivery.
Binks MX pumps are a completely new design in pump technology utilising patented magnetic detents to dramatically enhance smooth pump operation and change over with no pulse to provide the best “surge free” paint delivery for the perfect finish. These MX pumps operate at 12:1 and 32:1 ratio’s delivering 4 litres per minute output (max) with self adjusting spring loaded packings to extend the pump working life cycle and reduce the need for costly maintenance and downtime. The fluid sections and all wetted parts are constructed from the highest quality stainless steel for best fluid compatibility whilst providing a long and durable working life. MX pumps are fitted with an operator friendly control panel and include a quality easy to clean fluid filter as standard for reduced tip blockages.
|
|
|
Airmix® 20.50 Pump - Stainless Steel: Universal AIRMIX® pump, can be used with most coating materials, including high solids and water-based products.
|
|
|
Flowmax® 40.25F Pump - Stainless Steel: New generation Flowmax® pump for low volume applications
|
|
|
AIRMIX® 10.14 - "Start Pump": For any industrial application requiring low viscosity products
|
|
|
S3 G HPA: Small HPA gun featuring comfort and precision recommended for precise works and decoration
|
|
DELTA SPRAY® XT, Air spray (atomizing with air pressure up to 7 bar).
DELTA SPRAY® AUTO HVLP (atomizing air at high volume, low pressure).
Compliant (atomizing with reduced air pressure up to 2,5 bar).
Excellent durability and high end finishing quality are the key features, whether choosing the gravity-cup, suction feed or pressured gun version.
|
|
|
|
|
|
SPRAYMIUM the new electrostatic paint gun from SAMES and KREMLIN
SPRAYMIUM is a paint gun combining ergonomics, reliability and performance of application. It is dedicated to companies wishing to improve their application process by facilitating the work of the operator.
SPRAYMIUM combines Innovation and Experience in providing access to low pressure and high pressure spraying technologies, the qualities of AIRMIX and VORTEX ® which are guarantees of high quality for industrial finishing.
All components offer a technological breakthrough leading to an optimization process of formal painting.
SPRAYMIUM offers controls on the rear of the gun from where the operator can, with a single hand, choose from 3 pre-set electric settings and from there the flow management painting is done instantly. These electric settings are modifiable by the operator in order to better adapt to the types of items to be painted.
A pressure sensor integrated into the gun is used to know in real time pressure for a very precise adjustment of the spraying and perfect repeatability on a daily basis.
This is a patented novelty, exclusive to SPRAYMIUM.
SPRAYMIUM means also the dedicated control module SPRAYBOX, extremely friendly, easy to use, based on simple icons and easily understandable. The module can work immediately with the application programs preset. Of course, the operator can adjust these programs to their needs easily thereafter.
|
|
STIVENT Industry offers presents its new automated spray booth
Standard and made-to-measure
1 - Comprising 4 fluorescent neons
2 - This automated spray booth has a safety solenoid valve authorising compressed air only if the fan is in operation
3 - Folded card with filtration media
4 - With its 3kW fan, this booth has a speed of 11,000m3/h.
5 - The upper section is adjustable
The automated spray booth is available as 3 types : 3000 x 2000 x 2200.
|
|
Insulated Booths
Downdrarft Spray Booths for Truck and Large Equipment Finishing
Truck and Large Equipment spray booths are designed, engineered and manufactured to meet the needs of the transit, recreation, agriculture, construction, large equipment, and trucking industry. They are also ideal for commercial vehicles like large vans, similar to the Dodge Sprinter line of vehicles.
Global Finishing Solutions paintbooths provide a safe and efficient working environment for your finishing operation along with the latest technology.
Standard Features:
- Downdraft airflow
- Precise temperature most fuel efficient
- Air flow management
- Contamination control
- Multi-filtered air
- High production environment
- Recirculating cure or forced air cure available
- Pre-coated booth finish
- 30% more illumination
- High quality finishes
- T-8 color corrected tubes
|
|
In recent years, new cycles for the preparation of painting plastic components have been developed, leading to complete systems very similar to those used to paint other materials.
A feature of these systems is the aesthetic result necessary, which requires special attention for the filtering of the air.
The car industry has given a great boost to the development of the systems. On the one hand, the use of plastic bumpers, hoods and mudguards has made paint manufacturers develop formulations capable of respecting the car specifications and, on the other hand, has led systems engineers to find solutions with automatic cycles that can ensure quality as well as extremely high production.
PROS
- Excellent finish
- Constant results
- Low cost/piece
- Possibility of changing colour
CONS
- High investment cost
|
|
Solvent-based liquid spray painting systems
Painting with liquid spray painting products offers a wide range of solutions, thanks to the countless cycles possible, the characteristics of the paint (solvent- or water-based, mono-component or bi-component etc.).
Pre-treatment is decided by the type of material and the state of the surface, associated with cycles of series application (typically application of bases/primers + enamels and/or final protective coat).
According to the piece, the anti-corrosion or aesthetic finish aspects are privileged.
In general, solvent-based painting products require simpler treatment cycles compared to water-soluble painting products. Continuous or cell plants can be distinguished, or static plants with floor conveyors.
|
|
Low-pressure spraying – finish and output
• Improved material transfer rate
• Less mist
• Precision spraying
• Reduced kickback
• Less material waste
• Easy to use
• Time savings
4 adjustments:
• Spray pattern
• Air flow
• Material flow rate
• Spray head
For all professional bodywork and industrial applications
|
|
|
|
|
|
Painting with liquid spray painting products offers a wide range of solutions, thanks to the countless cycles possible, the characteristics of the paint (solvent- or water-based, mono-component or bi-component etc.).
Pre-treatment is decided by the type of material and the state of the surface, associated with cycles of series application (typically application of bases/primers + enamels and/or final protective coat).
According to the piece, the anti-corrosion or aesthetic finish aspects are privileged.
In general, solvent-based painting products require simpler treatment cycles compared to water-soluble painting products. Continuous or cell plants can be distinguished, or static plants with floor conveyors.
PROS
- Excellent finish
- Possibility of manual application on large sized pieces
- Possibility of frequent changes of colour even on automatic continuous systems
- Possibility of numerous engineering solutions
CONS
- The presence of skilled operators is essential for manual application, especially for high quality finishes
- Complex automation
- Irrecoverable overspray
- Emission of solvents and abatement systems required
|
|
|
|