|
|
Choose the model that suits the installation space from a wide variety of shapes and sizes (7 shapes, in standard or small sizes).
We have developed a broad range of fibers to meet a wide variety of needs. Multicore (flexible) fiber is a new type of standard fiber that can be used like wire without worrying about the bending radius. We have also produced fiber that will not break when used in moving parts and fiber that is not degraded by contact with oil.
A variety of heads incorporating the latest optical technology makes it possible to solve common problems related to detection and to increase reliability.
Resistant to dust and dirt
Capable of detecting smallworkpieces
Resistant to workpiece vibration Use these models to handle unstable detection conditions.
We have developed model variations for adapting to a variety of environmental conditions.
These models enable detection in high-temperature environments and vacuums.
Environmentresistive
Models P14
We have developed model variations for adapting to a variety of environmental conditions. These models enable detection in high-temperature environments and vacuums.
High-temperature environments
Environments subject to the splattering of chemicals
Vacuums: Use these models to handle applications in special environments.
|
|
D10 Series: High-performance fiber optic detectors
- Advanced fiber optic professional amplifier for use with plastic fibers
- Available with visible red or green sensing beam
- Delivers high-performance, low-contrast sensing
- Automatic TEACH options or manual adjustment
- Available in bipolar discrete, dual-discrete or analog/discrete output models
ExpertTM models
- 4-digit TEACH and signal strentgh display or bargraph readout
- Operating status indicators
- Easy-to-set static, dynamic and single-point programming
- Manual fine tuning
- Remote configuration, using TEACH wire
Plastic & Glass Fibres
- Banner offers an unrivalled selection of standard & customised fibres. |
|
| These new Contrinex sensors are characterized by their remarkably small size, Ø 4 mm smooth or M5, with a housing length of 35 mm. Protruding by 1.8 mm, the spherical sapphire lens projects a cylindrical light beam with a diameter < 4 mm, permitting recessed mounting. Despite their small size, they are fully self-contained, thus making an additional evaluation device superfluous. As a result, the sensors are less costly and easier to install than optical fibers with professional amplifiers. In addition, they replace larger switches where mounting space is limited. The devices are short-circuit proof and operate in a voltage range of 10 ... 30 VDC, and with an output current of up to 100 mA. They are moreover fully vacuum potted and, as a result, largely insensitive to environmental influences (degree of protection Ip 67). |
|
The through beam light sensor ceprox/ELS 264 is a simple and very cost effective sensor for detection of any kind of object in handling stations or automated machinery.
ceprox/ELS 264 through beam detection have a very compact design and can be easily integrated into areas where space is limited. Through the utilization of the latest technology, the ceprox/ELS 264 through beam sensor operates dependably and trouble-free.
The function of the through beam sensor itself is not influenced even by the maximum amount of sunlight (about 100'000 Lux). Because of the compact size of the sensor head of ELS 264, the simple “snap in” mechanism as well as the wide aperture angle, installation is incredibly easy.
All the electronics (incl. the micro controller) and the protected transistor output are integrated in this small housing and therefore no additional output device is required. |
|
RXC3 Series
Ideal for anticollision protection
- Autocontrôle permanent des composants optiques et électroniques
- Fonctionnement électrique en "Sécurité Positive"
- Détection de distance fiable par triangulation
- Système intégré d'aide à l'alignement
- Lentille chauffante
- Résistance aux vibrations
- Grande marge de signal |
|
WORLD-BEAM® Q12
The ultra-miniature universal sensor
- A new industry standard for miniature supplier of photoelectric sensors
- Bipolar NPN/PNP outputs in a housing just 22 x 8 x 12 mm
- Powerful sensing performance for extremely confined areas
- IP67 rating for use in a wide range of applications
- Mounting flexibility on & inside manufacturing equipment
- Overmolded design for enhanced durability & shielding
- Robust metal-lined mounting holes on all models
WORLD-BEAM® QS18
The ultimate value, world-standard sensor
- Universal photoelectric family with 18 mm threaded lens
- Replacement for hundreds of other sensor styles
- Rugged IP67 housing for harsh environments
- Available in all sensing modes
- QS18 Expert models with easy push-button setup
- 360-degree visible multi-function Led indicators
- Ranges are up to 20 m
WORLD-BEAM® QS30
- High power sensing with ranges up to 200 m
- Diffuse, opposed, retro, fixed- or adjustable-field and professional laser sensing modes
- Universal voltage models available
- Smallest sensor with integrated e/m relay
- Wide variety of special application sensing modes including; high-gain, laser and ultra-sensitive models
|
|
Manufacturers of photoelectric sensors
Recognition, detection, positioning, classification, counting, notification and monitoring. Nowadays, these processes are largely handled by non-contact photoelectric detection. Applications range from the automobile industry, mechanical engineering, and assembly automation, through warehousing and manufacturers of conveyor systems and packaging applications, to the printing and paper industries, and naturally include monitoring and safety systems, too.
With the VISOLUX brand, Pepperl Fuchs offers one of the largest lines of photoelectric sensors on the market. We guarantee that you will find the right sensor for your automation applications.
|
|
Photoelectric Proximity switches SIMATIC PXO
Fast and Accurate Sensing with Light and Professional laser
Pure optical acumen - this characterizes our extremely precise, fast and pin-point accurate optical proximity switches. Superior configuration convenience via teach-in or manufacturer of potentiometer and the easiest operational handling are added benefits. With the most varied shapes – from cubical, cylindrical to miniature designs and models, e.g. reflective light industrial scanners with or without background suppression, reflective light or thru-beam sensors, you can confidently master any task with a transmission range up to 50 m.
|
|
The SpaceMaster series consists of a wide selection of self-contained photoelectric sensors all housed in cylindrical (tubular) housings of different dimensions. These include industry standard Ø10, M12, M18 and snap-in 12.7 mm cylindrical housings which are all available with either a cable or plug connection. The series offers a selection of operation modes, which include thru beam (separate professional transmitter and professional receiver), diffuse proximity, retro-reflective, and fibre sensor.
The series offers a choice between AC or DC supply voltage, and the output can be chosen between a transistor or solid state output. All the transmitter models include a test input that may be used for either disabling or enabling the transmitting power temporarily for test purposes or multiplexing applications. The DC models are all protected against reverse polarity of supplies, control input and output signals. The output is protected against short circuit and inductive loads. The complete series includes power-on and output indicators. Sensitivity can either be adjusted via an integral potentiometer manufacturers or via a control wire input, depending on the selected model. |
|
| From infrared to professional laser technology, from fibre optics to integrated microprocessors – a highly developed sensor technology ensures reliable solutions for even the most demanding applications. For short ranges, under extreme environmental conditions, with tiny objects or for long distances – the sensors offer high technical efficiency as well as simple handling from installation to commissioning. |
|
The sensors from CC series are inlaid into a sturdy waterproof housing and can be used for many applications such as: automatisms, production machines, packaging – handling, conveyor …
Besides, the connection of CC sensors is very easy and fast since it’s made via a manufacturer of terminal block |
|
| The industry standard industrial photoelectric sensors provide the highest reliability for object and passage detection from short to long distance detection, in special environments, for special mounting conditions, special objects or special connectivity requirements. |
|
Retroreflective, Proximity, & Opposed Beam
Modulated LED Light Beam
NPN & PNP Outputs
Various Mounting Brackets and Reflective Targets
NEMA 1, 2, 3, 3S, 4, 4x, 12 & 13 |
|
| The Remote Sensor series consists of a wide selection of remote photoelectric sensors manufacturers, which are made to operate in conjunction with a Telco photoelectric professional amplifier. The remote photoelectric sensors consist of a separate professional transmitter and receiver sensor, which are available in a wide range of housings that may be used thru beam or diffuse proximity mode. The series is available with an optional power-on indicator in the receiver sensor and output indicator in the transmitter sensor, for use with any Telco photoelectric amplifier which has the sensor LED drive feature incorporated. |
|
Photoelectric sensor Y series with M18 threaded front mounting
The Y series is offered with seven different models. Thru-beam, Diffuse, Retroreflective,
Transparent object detection, Convergent Beam (close and regular) and BGS.
There is a model for use in almost any application. |
|
· High grade PSD (Position Sensing Device) is implemented in FGS (Foreground Suppression) system.
· Ideal for sensing thin objects lying on supplier of conveyor, etc.
· Numerical display for easier settings.
|
|
Reference: PS 989 S
Adjustable sensing distance: 1.5 to 8 cm
Supply: 101o 30 VDC
Outpul:PNP or NPN
Set-up by precision screw
Dimensions: 13x32x20 mm
Miniaturised
Integra led professional amplifier
Detection indication by LED
Indication of shed-circuit on the output by blinking LED
Lateral beam
Backgrcund suppression
Direct / inverse cutput
Red pubed visible light
2 m cable cr MS plug
Applications:
Control of post ion or presence of parts with background suppression
Detection of object hight on a conveyor specifications
Detection of solid granulates level |
|
· High grade PSD (Position Sensing Device) is implemented in FGS (Foreground Suppression) system.
· Ideal for sensing thin objects lying on conveyor manufacturers, etc.
· Numerical display for easier settings.
|
|
Slimmest BGS* Reflective Detection in the Market
Series now includes BGS reflective model with black/white error of 15%
Easy optical axis adjustment with emitter axis accuracy of ±2° (Through-beam Model)
Noise and external light resistance enhanced to that of E3Z or equivalent
Complete Compliance with RoHS
The Slimmest BGS (Background Suppression) Reflective Supplier of photoelectric sensors in the World
Ultra slim at 3.5 mm and black/white error of only 15%.
For example, the E3TFL1@ can stably detect a black object at 12 mm
without being affected by a white background at 20 mm.
OMRON provides BGS performance sharper than the previous Convergentreflective Sensors.
Great Reductions in Time Required for Adjusting Through-beam Sensor Optical Axes
Even at this size the Emitter axis accuracy is ±2°. High-precision alignment technology has enabled maximum reduction of light axis fluctuations of the Emitter beam. The margin for the received light is doubled if the Emitter and Receiver mechanical axes are aligned (at the rated sensing distance).
Improved Detection Stability for Reflective Sensors
Uses the well-praised disturbance light bypass algorithm from the E3Z Series. Environmental resistance to industrial inverter fluorescent lights and other light interference has been greatly improved.
|
|
Retro-reflex Polarised Axial Sensor
Reference: BA 946 S
Maximum sensing distance: on reflector ø46 1 m; on reflector ø84 2 m Supply: 10 to 30 VDC
Output: PNP NPN
ON-delay or OFF-delay timer standard
Dimensions: 13x30x60 mm
Insensibifty to refection interferences 1
Simple and quick set-up for self-teach (standard and sensitive mode) Alignment indicator
Dirty optics incf cator
Professional keyboard bck
Remote input for self-teach (sensitive mode)
Direct or inverse output
Universal state output
Cable or M8 plug
Polycarbonate strong housing
Applications:
Position or preserve control of parts on conditioning machine
Through-beam on a conveyor suppliers
Detection of shiny parts |
|
· High grade PSD (Position Sensing Device) is implemented in FGS (Foreground Suppression) system.
· Ideal for sensing thin objects lying on suppliers of conveyor, etc.
· Numerical display for easier settings.
|
|
· CMOS Image sensor for high accuracy displacement measurement.
· Span adjustment and Offset functions for flexible control of analogue output.
· Preset alarm for Peak/Bottom limit of analogue value.
· Accurate detection of dark colored targets.
|
|
BAT0618S : the best M18 sensor for transparent objects, whatever their shape
BAT0618S is totally adapted for packaging and food and beverage markets :
- Extended sensing distance up to 1.4m
- Plastic and stainless steel housing
- Direct and 90° head
- Popular miniature M18 housing
BAT0618S is the most performing products for transparent materials detection:
- Detection performances are even better than big square detection, including for transparent industrial films
- Coaxial optics: no parasite refraction: can detect complex plastic or galss bottles
- Sensitivity adjustment by teach button
- Wide range: 24 references: plastic, stainless steel, cable or interconnection , direct or 90° view...
|
|
EQ-500 series DC type:
The EQ-500 series is a reflective photoelectric sensor manufacturers with a compact design. Background and foreground suppression (DC types) and a long sensing range of up to 2.5m is characteristic of this sensor. Even in harsh environments prone to water or dust stable sensing is possible.
EQ-500 series can be used to confirm the passage of packages on a conveyer belt or detect people in front of automatic doors.
Characteristics:
Long sensing range: 100cm or 250cm
BGS and FGS function
Unaffected by colour, form or material of an object
Response time 2ms
NPN/PNP transistor output
Compact design H68 x W26 x L68mm
Timer function (EQ-5 T only)
Short-circuit proof
Protection IP67
Options:
Sensor mounting bracket
Foot angled mounting
EQ-500 series multivoltage type
The sensor functions with power sources from 24 to 240V AC and 12 to 24V DC. With the multivoltage type, a wide product range is available for customers. The relay output assures a high switching capacity. IP67 protection permits use in dusty or splashy environments.
Characteristics:
Long sensing range: 100cm or 250cm
BGS and FIGS function
Unaffected by colour, form or material of an object
Light ON, dark ON types
NPN/PNP transistor output
Compact design H68 x W26 x L68mm
Timer function (EQ-50T only)
Short-circuit proof
Protection IP67
Options:
Sensor mounting bracket
Foot angled mounting |
|
EX-10 series: Ultraminiature industrial photoelectric sensors
With dimensions of only 14.5 x 3.5 x 10mm, the EX-10 series detection are among the smallest and narrowest sensors worldwide. Despite their ultraminiaturised design, the maximum range of the thru-beam version is 1000mm yielding an exceptionally high performance. The EX-10 series is available in two different basic designs, with a front sensing or side sensing light source, which additionally extends the mounting options in narrow spaces.
Characteristics:
Response time only 0.5ms
Front sensing or side sensing versions
Fixed focus reflecting types (diffuse light type) available
2 indicator LEDs
Sealed to IP67 |
|
The ceprox/TLS 250 optical sensor is a diffuse-reflective sensor with intelligent signal processing. By using microprocessor technology in a miniaturized sensor, the detection range is automatically controlled. The sensor adapts automatically to its surroundings and suppresses signals reflected from the background. Builtin indicators aid in implementation and
help with trouble-shooting.
The spherical design is extremely compact and enables alignment of the sensor on all axes over a large angular field. Customer-specific or standard mounting brackets simplify installation.
This intelligent sensor is ideal for opening and safeguarding of automatic doors and gates, as well as for general counting or presence control of larger objects, such as postal packages, vehicles or people. |
|
... see all the products in the category
| |
