|
|
- Position sensing of the hand lever position. Sensor assisted option for monitoring by a higher-level control system.
- Lockable hand lever. Reliable servicing and maintenance even during operation.
- Selectable connection direction and mounting options. Output connections downward or to the side.
- Robust construction with an excellent design. Plastic lever with metal or plastic housing permits operation in harsh environments.
- Can be used as a pneumatic master switch or a 3/2-way valve.
Pneumatic connection: M5, G1/8, G1/4 or G1/2
Nominal size: 4/6/8/12 mm
Temperature range: -20 ... +80 °C
|
|
Extremely small, extremely fast, extremely versatile: MH1 Miniature valves for powering miniature drives or as pilot valves for process valves. Switching status indicated by means of LED. Can be mounted on printed circuit boards.
• Width 10 mm
• Standard nominal flow rate 10 ... 14 l/min
• Voltage 5/12/24 V DC
• Switching times from 8, 5 or 4 ms
• Pressure range -0.9 ... 8 bar
• Protection class IP40
|
|
Less is more: compact Performance individual valves CPE, space saving and light weight for close proximity to or on the individual drive.
• Width 10 ... 24 mm
• Flow rate up to 3,000 l/min
• Voltage 24 V DC, 110 V AC, 230 V AC
|
|
Connection guaranteed: a wide range of functions and variants - always harmonised to the respective requirements.
• Exhaust air/supply air flow control or without non-return function
• Flow rate 15 ... 4,300 l/min
• Threaded connectors M3 ... G3/4
• Push-in fittings QS3 ... QS 12 or PK-3 ... PK-6
• Variants with increased corrosion resistance
|
|
|
|
|
|
Indirectly actuated valve series with manually and mechanically actuated valves.
- Flow rate: 120 l/min
3/2-way valve
- Normally closed or normally open
4/2-way valve
- Minimal actuating force with pilot control
- Can also be used as 2/2-way valve by plugging the exhaust.
- 4 actuator types: stem, roller lever, idle return roller lever, whisker
Normally closed or normally open by turning the housing top:
VS, RS, LS
Normally closed, actuator attachment at left (number 1 on attachment above number 1 on housing)
VOS, ROS, LOS
Normally open, actuator attachment at right above number 2
This whisker valve with extremely low actuating forces is particularly well suited for units where dissimilar parts or actuating elements without precision positioning need to be sensed, or where the actuating levels are different. The whisker can be approached from any direction perpendicular to the whisker axis, or can be passed.
- Mounting bracket HV-1/8
Scope of delivery: 1 mounting bracket, 2 M5x25 socket head screws per DIN 912, 2 hex nuts and spring washers
Can be repaired with wearing parts kit
|
|
- Universal polymer valves with durable and reliable valve system.
- Fast, secure mounting and fixing of the valves on a stable metal manifold strip using a screw.
- Sturdy, economical and versatile. From the individual valve to the valve terminal.
- QS push-in connectors integrated in the valve housing for easy and secure mounting of the pneumatic tubing.
- Optimised capacity and wide range of flow rates from 200 - 1000 l/min.
- Assembled and tested units or individual components as modules for custom configurations.
Valve functions: 3/2-way NO, 3/2-way NC, 4/2-way single solenoid, 4/2-way double solenoid
Number of valve positions: 2 ... 12 valve manifold and 4 ... 12 multi-pin terminal
Protection class: IP 65
|
|
Air boxes
The AS-i AirBoxes are compact pneumatic valves, complemented by digital feedback inputs. They are integrated in a ClassicLine housing and are compatible in terms of space and mounting. The AS-i connection is carried out via the common flat cable or round cable lower parts. 3/2-way and 4/2-way valves are available.
|
|
LS-V15C
Proportional Pneumatic Control Valve
The LS-V15C is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
|
Camozzi has not neglected the importance of these valves especially as actuator performance depends essentially on the right choice of automatic valve. The range includes flow regulators, quick release valves, flow control valves, basic logic functions and silencers with different specifications in order to meet most requirements.
|
|
This range of valves includes operating devices suitable for most applications according to the space available. They are offered in a range of different dimensions: from M5 to G1/4 and in versions: 3/2, 5/2, 5/3 center open and 5/3 center closed.
|
|
This type of valves is offered with ports from M5 to G1/4 in different versions including 3/2 NC, 3/2 NO and 5/2 and with a variety of operators to meet a wide range of uses. The valves are available both with brass gate and with spool to satisfy most applications.
|
|
The Diaphragm Amplifiers are miniature interface devices which perform the same function as a piloted three-way valve, but at low outlet flow rates. Pneumatic signals of several inches water gauge applied to the input will control the output pressure up to 35 PSI in both digital and analog systems.
Diaphragm Amplifiers are very suitable for providing pneumatic signals to air-piloted valves for powering small cylinders. They are also used at fluidic signal levels for providing isolation and in timing circuits.
|
|
The Valves offer an adjustable pilot set point of 0.5 to 100 PSI. Normally open or normally closed valves are available; the valve pressure range is 22 to 116 PSI. Four mounting styles are available: Flush Mount, Manifold Mount, Panel Mount, and Pipe Threaded.
Vacuum Piloted Valves are also available.
|
|
|
The fine threads of the needle valve permit excellent adjustment for precise control of flow. The flow is restricted in both directions and is adjustable from 0 to the equivalent flow of a 0.025" diameter orifice. The 7-turn adjustment needle valves are available in two models, the standard model and the fine adjustment model. The standard adjustment model has a pin angle of 6° with 10-64 threads; the fine adjustment model has a pin angle of 4° with 10-80 threads.
|
|
LS-V05C
Proportional Pneumatic Control Valve
The LS-V05C is an enhanced version of the LS System proportional, directional control pneumatic valve for high performance applications such as medical equipment, test & measurement systems, advanced automation and animatronics. The valve is designed to be paired with Enfield Technologies driver or controller/driver electronics such as the LS-C10, LS-C41, and C2s.
Features:
* Proportional
* High Speed and Flow
* Whisper Quiet
* Vacuum Capable
* High Linearity
|
|
General Description
Uni-directional
316 Stainless Steel or Brass in-line flow regulators for uni-directional operation (free flow return).
Bi-directional
316 Stainless Steel or Brass in-line flow regulators for bi-directional operation (separate flow control in each direction).
Operating Fluids
- Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available
- Liquids
Low pressure hydraulic, mineral oil or water.
|
|
M2d
Proportional Pneumatic Control Valve with Integrated Driver
The M2d is an instrument-grade, proportional, directional control pneumatic valve with an integrated driver. The M2d is powered by 24 Vdc and the onboard signal conditioning accepts either voltage or current command signals.
Features:
* Proportional
* Efficient PWM Driver
* High Speed and Flow
* Vacuum Capable
* High Linearity
|
|
General Description:
- Miniature 3 way, 2 position brass pilot valves. Air, manual or mechanically operated. Normally closed operation. Universal versions available.
- Compact. High flow. Sealed mid position during transition.
- Pilot operation of larger directional control valves or direct operation of single acting cylinders.
Operating Fluids:
- Compressed air
- Filtered and lubricated or non lubricated up to 10 bar (145 psi). ISO VG37 mineral oil (or equivalent) is recommended for use at normal ambient temperatures in lubricated systems.
Stroke:
- Nominal stroke of valve spindle 3.25mm
- Additional over travel 0.75mm approximately
Working Temperature:
- -10ºC to +75ºC (15ºF to 167ºF)
|
|
2, 3 port valve
4S1 series
4.5
M(D)3SA1
46
(small pneumatic valve)
M3GA
156
4G series
4.0 to 16
MN3GA
248
Pilot operated
soft spool valve
MN3S0
4.0
MN4S0 series
368
One side solenoid type
MT3S0
3.0
4K series
M3KA
516
M3MA0
3M series
0.1 to 0.5
686
(small pneumatic valve)
M3MB0
Direct acting
poppet valve
M3PA
1.9 to 5.4
3P series
710
M3PB
B * P51
742
Pilot operated
P/M/B series
0.45 to 0.84
poppet valve
(miniature pneumatic valve)
N * P512/3/4
746
|
|
|
These 3/2-way normally closed valves in base-mounting design are available as a complete Series in Sizes 4, 8, 12 and 30 (outlet ports G 1/2 to G 2, on both sides for more piping flexibility). valves offer the design features of the well-proven ROSS poppet valve technology and fully comply with the relevant criteria of DIN EN 692 as well as DIN EN 954 (Cat. 3 and 4). The valves provide dynamic, cyclic and internal monitoring during each actuating and de-actuating movement. DM2™ valves have been approved by Deutsche Berufsgenossenschaft (BG-PRÜFZERT, MHHW, Cert.-No.s 06 008 / 06 021).
|
|
|
Directional control and failsafe function in valve actuator circuits in corrosive and hazardous environment. 3/2 direct operated solenoid valves available in two versions: A/ Normally closed (U131 types) - NAMUR interface for direct adaptation to the actuator including integrated flow regulators. B/ Universal (U133 types) with NPT 1/4 pipe connection and also with Manual Reset function (U033X types).
|
|
NAMUR MOUNT 4 WAY PNEUMATIC VALVES (VAP)
PIPE MOUNT 4 WAY PNEUMATIC VALVES (VAP)
SUB BASE MOUNT
316L STAINLESS STEEL 4 WAY PNEUMATIC VALVES
|
|
|
Many applications require hand and foot actuation. The OMNI 375 3-Ways and 4-Ways offer a rugged, compact, versatile answer. Mount them in any position.
|
|
All the of the benefits of Clippard quality and reliability are now available in these 10 & 15 mm valves. Offered in both Normally Open or Normally Closed models, these 2- and 3-way valves are perfect for small and compact areas where pneumatic controls are needed.
This series has a high strength, light-weight engineered glass filled nylon body, along with stainless steel, copper and Buna-N, making it suitable for a broad range of applications. With exceptional life and reliability this is the perfect sub-miniature valve for tomorrow's needs in a wide variety of industries.
|
|
|
|
|
|
The PV-1 Miniature Pneumatic Diaphragm Valve is designed for use in high purity semiconductor applications, and is also ideally suited for ultra-pure water and aggressive chemical systems. The design utilizes a machined modified PTFE body, seat and diaphragm ensuring excellent flexibility and long life. The valve is available in 2 and 3 way configurations. It is ideal for low flow and small dose injection applications.
FEATURES:
* Precision machined diaphragm manufactured from the latest technology modified PTFE. Provides over five times the flexural life as compared to conventional PTFE. Tongue and groove seal for positive diaphragm to body seal. Benefits are high cycle life, lower replacement costs, less downtime and isolates media from actuator.
* Compact design allows for ease of installation and maintenance.
SPECIFICATIONS:
Materials of Construction:
* Wetted Surfaces - PTFE, Modified PTFE
* External Surfaces - PFA, PVDF
* Other Materials - Anodized Aluminum, SS, Nitrile
Pressure Ranges:
* 25” Hg vacuum (846 mbar) to 20 PSIG (1.4 bar)
* Actuator - 20 PSIG (1.4 bar) to 120 PSIG (8.3 bar)
* Pressure ranges above are for operation at ambient temperature
Temperature Ranges:
* -60° - 212° F (-51° - 100° C) Ambient
* -60° - 400° F (-51° - 204° C) Fluid
|
|
|
Angle Flow Control valves are designed to provide accurate flow control in a compact, labor saving package. Features like built in push-in fittings, pre-applied thread sealant, convenient swivel design and unique needle design all add up to a package that will save time, money and energy when accurate control is needed on pneumatic actuators.
|
|
General Description
John Guest acetal shut-off valves have a brand new full bore mechanism and are especially designed for the Brewing and Soft Drinks industries and for potable water. They are also suitable for air and inert gases such as N2/CO2 provided they are installed in accordance with the UK Brewers and Licensed Retailers Association Code of Practice or similar industry/government safety guidelines.
The range includes valves with short and long handles to operate a 1/4 turn on/off action. The valves are available with or without mounting clip.
Materials of Construction
This fitting is made of the following components:-
* The body is produced in acetal copolymer
* 'O'Rings are nitrile rubber
* The collet is produced in acetal copolymer with stainless steel teeth
* The handle is produced in acetal copolymer
|
|
|
|
