Pneumatic valves

Temperature: -20 °C - 140 °C
Pressure: max 16.0 bar
DN: 15 mm - 65 mm

... Right Angle Valve with EHEDG-Certification Pneumatic control valve in right angle design with integrated microporcessor positioner type 8049 or as a shut-off valve for ...

Temperature: -60 °C - 350 °C
Pressure: 10 bar - 100 bar
DN: 15 mm - 250 mm

... -pneumatic positioner is fitted as standard to every valve and is used for precise control. Media such as steam, liquids, gases, etc. are easy to handle.Sliding gate control valve with ...

Temperature: -60 °C - 350 °C
Pressure: 10 bar - 40 bar
DN: 15 mm - 250 mm

Product line GS3 - The combination of the sliding gate valve with piston actuator and integrated positioner offers a compact valve assembly, chracterized by a high control quality and control dynamics. ...

DN: 0.125, 0.25, 0.375, 0.5 in

BPV Pneumatic Pinch Valve The BPV Series Pneumatic Pinch Valves are designed to provide affordability and compactness without sacrificing on quality. This valve ...

Pressure: 125 psi
Flow rate: 16 ft³/min

"300" Series “300” Series valves provide a 2-way normally closed function. The air pilot actuator features a 1/16 tube ID barb for quick tubing connection. For plumbing convenience, both the input ...

Pressure: 125 psi
Flow rate: 12 ft³/min

"20" Series The “20” Series product offering includes 3-way control valves with a 10-32 (F) air pilot actuator. These normally open or normally closed valves are fully ported with 10-32 ...

Temperature: -20 °C - 90 °C
Pressure: 2.5 bar
DN: 100 mm - 140 mm

... Butterfly Valves consist of a single block body manufactured from die-cast aluminium, a carbon steel or stainless steel disc including shafts, and an elastomer seal. An adjusting lever or pneumatic or ...

... to abrasion as compared to traditional valves. Moreover, it avoids the use of flange gaskets. VL Slide Valves are available in a variety of configurations including rectangular sizes. In the VLQ version ...

Temperature: -20 °C - 80 °C
DN: 13 mm - 200 mm

... VMM-type Pinch Valves are used for interception of material flow in pneumatic conveying systems, or other pipelines. In addition, they can be installed as a locking device for silo filling pipes. Regarding ...

Pressure: 16 bar
DN: 0.5 in - 4 in
Flow rate: 4 m³/h - 436 m³/h

- Long welded ends to ASMEBPE, ISO 1127 - Clamp ferrule to ASME-BPE, DIN 32676-B - Electropolished surfaces SFV4 (Ra 15 µinch, corresponds to Ra 0.4 µm) - PTFE seal with minimal dead space (PTFE cavity fillers) - FDA-compliant ...

DN: 0.25 mm - 4 mm
Flow rate: 5 m³/h - 435 m³/h

- Approvals: DGRL 2014/68/EU, CRN, ATEX (manufacturer declaration, except manual version), 3.1 material certificates - without ISO 5211 flange mounting: • 2-piece, 2-way without ISO 5211, with lockable hand lever - with ISO 5211 ...

DN: 0.5 mm - 8 mm
Flow rate: 9 m³/h - 2,078 m³/h

- Antistatic design - anti-blow out control shaft - Split-body-design - 2-piece, 2-way - ISO 5211 flange connection for direct mounting - Flange connection to ANSI B16.5 class 150 - API Fire Safe approval - Approvals: DGRL 2014/68/EU, ...

Temperature: -10 °C - 60 °C
Pressure: 1 bar - 10 bar
DN: 0.125, 0.25 in

... technopolymer. BASIC valves can be assembled with accessories of other families of valves, in particular with 22 mm coils, a 8 mm hole and related connectors, modular bases and the multi-position connectors ...

Temperature: -10 °C - 50 °C
Pressure: 15, 13 bar
DN: 0.125 in - 1 in

... equipment needs to be shut off. Manual, pneumatic, electro-pneumatic and assisted electro-pneumatic control versions are available. The last version must be used if the inlet pressure ...

Temperature: -10 °C - 50 °C
Pressure: 3 bar - 10 bar
DN: 0.125 in - 1 in

... starter is a pneumatic component that allows air enter the circuit gradually, thereby avoiding excessive pressure bursts. A sophisticated system of internal valves allows two separate ...

Pressure: 10 bar
DN: 40 mm - 100 mm

... on multiple size ranges: DN40-DN65 (1.5”-3.0”) and DN80-DN100 (4.0”) Reduced CIP losses improve cost savings Low air consumption and air supply requirements Long housing ports ease manifold building Integrated ...

Temperature: 140 °C
Pressure: 10 bar
DN: 25 mm - 250 mm

The stop valve, APV DELTA butterfly valve is made by APX. The butterfly valve can be manually or pneumatically actuated. Each valve is suitable for any operation because ...

Temperature: 140 °C
Pressure: 10 bar
DN: 25 mm - 150 mm

... industries as well as in the chemical and pharmaceutical industries. More features and advantages: Extra wall thickness of valve housing reduces stress in the seat area Wear resistant elastomer/PTFE shaft seal ...

Temperature: -15 °C - 200 °C
Pressure: 25 bar
DN: 15 mm - 50 mm

Special features Consisting of single-seated globe valve and actuator Flanges or male thread connection and welding or threaded ends or female thread connection Accessories Type 2 NI Strainer

Temperature: -10 °C - 300 °C
Pressure: 16 bar - 40 bar
DN: 15 mm - 100 mm

Special features Consisting of globe valve and actuator Suitable for liquids, gases, and steam Accessories Type 2 N Strainer Type 2 NI Strainer Options Flow divider for noise reduction ...

Temperature: -15 °C - 150 °C
Pressure: 25 bar
DN: 15 mm - 50 mm

Special features Consisting of three-way valve and actuator Male thread connection and welding or threaded ends Mixing valve also with female thread connection Suitable for water ...

Pressure: 700,000 Pa
DN: 15 mm - 350 mm

... PPV 1PS pinch valve is manufactured by Isogate® and has a robust cast-metal casing that completely encloses a pinch sleeve and contains pneumatic or hydraulic supply pressure thereby providing secondary ...

Pressure: 690,000, 1,035,000, 865,000 Pa
DN: 15 mm - 350 mm

Isogate® PP 2L Series pneumatic pinch valves are specifically designed to handle tough, abrasive and corrosive process applications. Overview The Isogate® PP 2L pneumatic pinch ...

DN: 63, 40, 160, 16 mm

The angle valves feature an all in one box design in the same housing with a position indicator. The pneumatically actuated valve come with an integral position indicator ...

DN: 40, 16 mm

Inline normally closed pneumatically actuated valves have an integrated position indicator (PI) within the same housing. Made of a very robust stainless steel housing with sealed bellows feed-through, ...

DN: 5 mm

The mini angle valves without position indicator (PI), DN 5 is built with a compact design and short opening time highly suitable for industrial applications. The electro-pneumatically actuated valve ...

... Series 2/2 pneumatic pinch valves are air-piloted devices designed to open or close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may ...

... Input Pressure: PAV-2/3: 300 psig; PAVO-2/3:150 psig max. Air Pilot Pressure: 15 psig min. Air Flow: PAV-2/3: 4.0 scfm @ 50 psig; 6.8 scfm @ 100 psig; PAVO-2/3: 6.8 scfm @ 50 psig; 11.6 scfm @ 100 psig Mounting: ...

Temperature: 32 °F - 230 °F
Pressure: 30 psi - 100 psi

... -Way Low Force Actuation Push Button, Black (Green shown) Additional Information Air Flow 6.0 scfm@100 psig Force 1 oz manual Max PSI 30 to 100 psig Medium Air Ports 1/8" NPT Temperature Range 32 to 230 F

Temperature: -54 °C - 93 °C
Pressure: 0 bar - 41.4 bar
DN: 0.25, 0.5 in

... Series toggle valves are quick acting valves for simple open or close systems with low pressure (300 PSI) requirements. Product Overview Parker’s VQ Series Toggle Valves are the right ...

Pressure: 6 bar - 150 bar

Cartridge chamber metering valves: Simple and fast metering volume adjustment The Cartridge Chamber Metering Valve is based on a special principle. The metering chamber is an exchangeable cartridge ...

Pressure: 3 bar - 20 bar

... short cycle times. The valve consists of two structurally separate parts, meaning that material cannot leak into the drive cylinder and interfere with the movement of the valve needle. This feature ...

Temperature: -40 °C - 200 °C
Pressure: 16 bar
DN: 20 mm - 1,200 mm

Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...

Temperature: -10 °C - 160 °C
Pressure: 5, 6, 10 bar
DN: 40 mm - 600 mm

Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...

Temperature: -10 °C - 160 °C
Pressure: 5, 6, 10 bar
DN: 40 mm - 600 mm

Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...

Pressure: 700 bar

The direct acting valves (Series F-001) with 2-phase control valves for high pressure, up to 700 bar, allow for flow control with a valve module. The unit contains a pressure compensation ...

Temperature: 0 °C - 50 °C
Pressure: 3 bar - 6 bar
DN: 5 mm - 9 mm

Series 8 pneumatic operated valves are particularly suitable for applications requiring high flow combined wtih compact design. The valve is pneumatic operated by electro-pilots ...

Temperature: 0 °C - 60 °C
Pressure: 2 bar - 10 bar
DN: 4 mm

Series 2L basic logic functions are available in 5 different models and can be mounted separately by means of 2 passing holes in the body. Bracket Mod. 2LQ-8A allows to have the inlets and outlets on the front side, facilitating the mounting ...

Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 3,000 mbar
DN: 0.25 in - 1.5 in

Pilot-operated 3-way vacuum valve is engineered with 2-position design, integrated with pneumatically-driven conical shutters. It is operated either through normally open or closed orientation. It is ideal for a range ...

Temperature: 170 °C
Pressure: 0 bar - 16 bar
DN: 15 mm - 100 mm

The STERI-TROL is a pneumatically actuated 2-port angle pattern clean service control valve suitable for a wide range of applications in the pharmaceutical industry. The self-draining crevice free ...

Temperature: 0 °C - 80 °C
Pressure: 0 bar - 5.5 bar
DN: 0.25 in

The HPVM Molded Valve was developed to add critical features including visual indication and standard FlareGrip® II end connections to the robust HPV machined versionThis pneumatically actuated ...

Temperature: 0 °C - 80 °C
Pressure: 0 bar - 5.5 bar
DN: 0.25 in

The HPVM Molded Valve was developed to add critical features including visual indication and standard FlareGrip® II end connections to the robust HPV machined versionThis pneumatically actuated ...

Temperature: 0 °C - 80 °C
Pressure: 0 bar - 5.5 bar
DN: 0.25 in

The HPVM Molded Valve was developed to add critical features including visual indication and standard FlareGrip® II end connections to the robust HPV machined versionThis pneumatically actuated ...

Temperature: -10 °C - 60 °C
Pressure: 2 bar - 10 bar
DN: 8, 7 mm

... rate of maximum 1300 l / min, as long as it is used under the operating parameters recommended by the manufacturer. The valves are of two different types, 5/2-way and 3/2 way, while the manual override system is also ...

Flow rate: 170 l/min - 3,800 l/min

* Port M5, G1/8, G1/4, G1/2, also available with NPT thread * Flow rate 170 ... 4300 l/min.

Temperature: 0 °C - 150 °C
Pressure: 0.2 bar - 10 bar
DN: 4 mm - 10 mm

Connection G1/8, G1/4 Plug connector 4, 6, 8, 10 mm Flow rate 0 ... 530 l/min. Non-return/flow control valve Special features: Easy to clean Enhanced corrosion protection

Temperature: -50 °C - 160 °C
Pressure: 100 bar
DN: 25 mm - 1,000 mm

Flowrox pinch valves represent an excellent solution when shut-off and control applications deal with abrasive or corrosive slurries and powder or coarse substances. The modular structure of Larox valve ...

Temperature: -10 °C - 350 °C
Pressure: 25 bar
DN: 15 mm - 200 mm

KSB BOA-CVE H control valves are available with double-acting electric (BOA-CVE H) or pneumatic (BOA-CVP H) actuators. The valves can handle temperatures ranging from -10°C to 350°C ...

Temperature: -10 °C - 70 °C
Pressure: 25 bar
DN: 25 mm - 600 mm

This is a wedge gate valve with bolted bonnet, elastomer-coated wedge, inside screw and a rotating stem. Its flanged ends conform to EN standards. It has; face-to-face length complying with EN 558/14 and EN 558/15. The ...

Temperature: -50 °C - 260 °C
Pressure: 25 bar
DN: 50 mm - 1,200 mm

This is one of the most advanced double-offset butterfly valves, equipped with a metal or a plastomer-seat ring, depending on what suits you. The materials used, like stainless and cast steel, provide extra durability. It ...

Temperature: 186 °C
Pressure: 5 bar - 8 bar

... Belleville washer design to ensure a long life. The ball valve has an integral locking system for manual operation. H-500 - PNEUMATIC ACTUATED VALVES FEATURES - 90° Actuation for 2-way ...

Temperature: 149 °C
Pressure: 5 bar - 8 bar

... H-800 - PNEUMATIC ACTUATED VALVES FEATURES - 90° Actuation for 2-way valves (Straight & Angle) - 180° Actuation for T-type valves - Actuators comply with industry standards ...

Temperature: 10 °C - 60 °C
Pressure: 150 psi

The HM and HMS Series Valves are ultra-clean metal diaphragm valves which are 1/4" in size. They are utilized in low and high-pressure applications and have multi-port configurations (2-port, L-port, ...

Temperature: -196 °C - 50 °C
Pressure: 25 bar
DN: 10 mm - 50 mm

FREES – the new valve generation with minimal clearance volume . FREES offers more than 240% overall system performance compared with conventional vacuum insulated valves because it provides 3 benefits: Less ...

Temperature: -30 °C - 50 °C
Pressure: 10 bar - 25 bar
DN: 15 mm - 50 mm

... operator can change his system from manual to pneumatic operation or from a stop valve to a non return valve with minimum system disturbance or downtime or addition high costs. The ...

Temperature: -196 °C - 50 °C
Pressure: 18, 25, 240 bar
DN: 40, 10, 5 mm

... flexible components inside the valve. The pneumatic actuator is also sealed by a metal seal. Attrition by frictions cannot happen. The valve is maintenance-free. Currently this valve ...

Pressure: 10 bar
DN: 65 mm - 200 mm

Aluminium anodised body Aluminium epoxy powder coated end caps Any installation position Rotation angle 90°, +/- 10° Integrated optical position indication

Pressure: 10 bar
DN: 65 mm - 200 mm

... for fix point mounting Mounting between DIN, ANSI, JIS flanges ISO 5211 flange type (F07, F10) Simple installation of pneumatic or electric actuator

Pressure: 10 bar
DN: 65 mm - 200 mm

... position Rotation angle 90°, +/- 10° Integrated optical position indication Accessories: Limit switch box Solenoid valve

Temperature: -10 °C - 140 °C
Pressure: 0 bar - 7 bar
DN: 15 mm

... medium. All actuator parts (except seals) are made from stainless steel. The filling valve is available in pneumatic design F40 (and electrical design F60). The pneumatic version is available ...

Temperature: -10 °C - 100 °C

The GEMÜ 610 2/2-way diaphragm valve has a low maintenance plastic piston actuator and is pneumatically operated. An integral optical position indicator is standard. Normally Closed (NC), Normally Open (NO) and Double ...

Temperature: 0 °C - 100 °C

The GEMÜ 620 2/2-way diaphragm valve has a low maintenance metal membrane actuator and is pneumatically operated. The valve is also suitable for high media temperatures up to 150 °C. -Insensitive to ...