Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 3,000 mbar
DN: 0.25 in - 1.5 in
... position, 3-way valves feature pneumatically activated conical shutters. They can be used normally either closed or open. They are recommended in all the cases that require a quick exchange between the vacuum pump suction ...
DN: 60 mm - 300 mm
The throttle/shut-off valve is integrated with a Belimo valve actuator. The unit is incorporated with a limit switch, which is used with a remote control with surcharge. The device is designed without ...
Temperature: 60 °C
Pressure: 0.3 bar - 10 bar
DN: 10 mm
Servo-controlled valve nominal diameter DN 10, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills ...
... Pitch Valves for wind turbines are axis control servo valves that were developed specifically for the demanding requirements of onshore and offshore wind turbines. With its high performance ...
Temperature: -20 °C - 80 °C
Pressure: 315 bar
DN: 16 mm
Features Valve to control position, force, pressure or velocity 2-stage servo valve with mechanical or mechanical and electrical feedback 1st stage nozzle/flapper plate amplifier For ...
Pressure: 9 bar - 70 bar
DN: 1 in - 2.5 in
Flow rate: 40 l/min - 1,200 l/min
Description The Servo Electronic Valve (SEV) is controlled by closed loop digital electronics, providing consistent acceleration and deceleration of hydraulic elevators largely independent of load and ...
Temperature: -15 °C - 60 °C
Pressure: 1,020 psi - 5,080 psi
DN: 3 mm
High-speed linear servo valves have outstanding features of high response and exceptional contamination resistance. These features are achieved by the compact and powerful linear motor which directly ...
... series is an isolation valve developed by MKS Instruments. It is built with stainless steel construction with precise vacuum isolation. It is equipped with bellows and ball valves, manual, pneumatic ...
Flow rate: 1,040 l/min
... control of the position, speed, and pressure of main machine’s actuators. High responsiveness is achieved by combining the valve with the dedicated driver.
Pressure: 3 bar - 16 bar
DN: 40 mm - 400 mm
Pressure: 20 bar
Flow rate: 1,500 l/min
SV servo valves from EMG offer a constant dynamic for pressure and control along with maximum longevity and repetition accuracy. Servo valves are the most important ...
Flow rate: 5 l/min - 2,400 l/min
... actuator and servo-valve must be correctly sized and set up. Different tests require different performance characteristics such as a dynamic force, a displacement, a test frequency or a specific velocity. ...
At KNR, we’ve developed and optimized our own nozzle-flapper-type servo valve, specifically for use on small hydraulic robots. It operates at a bandwidth of over 60Hz (special model 90Hz), and has its ...
Your suggestions for improvement:
Receive updates on this section every two weeks.