Lever valves

DN: 100 mm - 400 mm
Pressure: 0.2 bar

VFP/VFPX Butterfly Valves can be fitted beneath hoppers, bins, silos, screw or other type conveyors, or to intercept pneumatic conveying ducts. Due to their special design material residue between valve ...

DN: 240 mm - 600 mm

... hoppers, or bins, VFF Silo Closure Butterfly Valves are used in all types of building material processing plants where interception of gravity-fed dry materials is required. VFF-type Silo Closure Butterfly Valves ...

DN: 100 mm - 140 mm
Pressure: 2.5 bar
Temperature: -20 °C - 90 °C

VW Butterfly Valves are the ideal solution for the interception of gravity-fed or pneumatically conveyed dry powders or granules in a variety of bulk solids handling and processing plants. VW Butterfly Valves ...

In-line valves VS series valves are space-saving butterfly-type in-line valves with good conductance.

Ball valves They are the simplest type of shut-off device. They open up the entire cross-section. Therefore they can be used with load lock chambers.

Pressure: 300 psi
Temperature: 32 °F - 230 °F

The MJTV-3 is a 3-way ported toggle valve manufactured by Clippard. Its key features include an air flow rate of 25 scfm at 100 psig; a temperature ranging between 32 to 230 F; a force rate of 2 1/2 oz; a PSI reaching ...

DN: 0.25 in - 3 in
Pressure: 32, 40, 25 bar
Temperature: -20 °C - 150 °C

This Ball Valve from Prevost is a tool that helps in the isolation of one or more sections of a network. This full flow valve is specifically designed to have specifications that can work in different ...

DN: 15 mm
Pressure: 68 bar
Temperature: -20 °C - 200 °C

Introducing the RS PRO general purpose manual ball valve designed for industrial applications. Manual ball valves are used to operate shut off valves which control water flow and pressure. Ball ...

DN: 0.5 in - 4 in
Pressure: 16 bar
Flow rate: 4 m³/h - 436 m³/h

- Long welded ends to ASMEBPE, ISO 1127 - Clamp ferrule to ASME-BPE, DIN 32676-B - Electropolished surfaces SFV4 (Ra 15 µinch, corresponds to Ra 0.4 µm) - PTFE seal with minimal dead space (PTFE cavity fillers) - FDA-compliant ...

DN: 8 mm - 100 mm
Pressure: 0 bar - 63 bar
Temperature: -20 °C - 200 °C

... way without ISO 5211, with lockable hand lever - with ISO 5211 flange connection: • 3-piece, 2-way • 3-way, L and T hole as horizontal design - Threaded connection to ANSI B 1.20.1 (NPT) - lockable hand lever ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 200 °C

- Antistatic design - anti-blow out control shaft - Split-body-design - 2-piece, 2-way - ISO 5211 flange connection for direct mounting - Flange connection to ANSI B16.5 class 150 - API Fire Safe approval - Approvals: DGRL 2014/68/EU, ...

DN: 6 mm - 250 mm
Pressure: 4, 5, 16 bar
Temperature: -20 °C - 180 °C

Elster Kromschroeder valves for manually shutting off gas, air and water are EC type tested and certified. The valves are available in Diameter Nominal ranging from 6 to 250, 2 connection types and pe ...

DN: 0.063 in - 0.118 in
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 232 °C

DN: 0.063 mm - 3 mm
Pressure: 0 psi - 20,000 psi
Temperature: -54 °C - 232 °C

Parker's Hi-Pro ball valve is a two piece bi-directional manual ball valve designed for cold working pressure process control applications from 3,600 PSI (247 bar) up to 20,000 PSI (1379 bar) rating, ...

DN: 10, 15, 20, 25 mm
Pressure: 19 bar - 431 bar
Temperature: -29 °C - 232 °C

... was referred to as a modular valve. No supporting is needed as the modular valve is small and light compared to the original method, It is easier to operate as the three valves are much ...

DN: 50 mm - 600 mm
Pressure: 16 bar
Temperature: -10 °C - 120 °C

Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...

DN: 50 mm - 300 mm
Pressure: 19.2 bar
Temperature: -10 °C - 120 °C

FEATURES AND BENEFITS - Vulcanised liner for severe service conditions and Vacuum applications - Fully lugged body for end of line services - Triple shaft bearings prevent shaft defl ection - Accurate machining of components results ...

DN: 50 mm - 300 mm
Pressure: 3 bar
Temperature: 10 °C - 100 °C

Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...

DN: 10 mm
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 60 °C

... , the final closing procedure is due to the buoyancy of the float body. Valves of this design are single chamber valves with the inlet ninety degrees to the outlet. The valve, having ...

DN: 10 mm
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 60 °C

... multi-position lever. The universal lever can be adapted to a wide variety of tank geometries without tools. In addition, the lever can be shortened for use in smaller tanks. With the ...

DN: 10 mm
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 60 °C

... incorporating a normally closed servo-controlled solenoid valve upstream of the float valve, but in the same body, this acts as the shut off to the supply line. This combined valve allows ...

DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C

BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316

DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C

MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316

DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C

1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316

Flow rate: 23.7 l/min

Model SP248 chrome-plated brass stay-open valve with squeeze lever handle and built-in 6.25 gpm (23.7 L) flow control. 1/2" IPS inlet x 1/4" IPS outlet.

... stay-open ball valve, equipped with a stainless steel stem. Full flow occurs with pull on lever. Special self-draining feature allows valve and connecting lines to showerhead to drain ...

DN: 32, 25, 63, 40, 20 mm

DN: 150, 80, 100 mm

DN: 0.5 in - 3 in

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2

Pressure: 0 bar - 10 bar
Temperature: -20 °C - 70 °C

This is a hand lever operated pneumatic valve which in turn operates the hydraulic valve and clutch assembly to connect the hydraulic pump. It is also with ETO ON and OFF switch for ...

DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min

Circuit selector valve, manual operation maximum pressure

DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min

Constant openning valve, 3 way, made in steel for working with high pressure.

DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

... developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required ...

DN: 40 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 0 °C - 60 °C

... installed as an end line valve, bottom discharge valve or tank dump valve • The wafer valve can be transformed into a one-way Lug body valve thanks ...

DN: 40 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: 0 °C - 100 °C

... dimensions of the valve in accordance with standard ISO 5752 (DN 40÷200 Medium Series 25, DN 250÷ 300 Long Series 16) and DIN 3202 K2 and ISO 5752 (DN 65÷200 K2, DN 250÷300 K3) • Can also be installed as an end line valve, ...