Valve actuators

Torque: 2,000 Nm

... rugged construction makes it the gearbox of choice for low torque manual applications. Suitable for ball, plug and butterfly valves. Torque range up to 2,000 Nm (1,475 lbf.ft). 5 sizes Ratios 40:1 and ...

Torque: 10 Nm - 3,000 Nm

... Intelligent Actuator For 60 years Rotork has used innovation for designing reliable, flexible and robust valve actuators and control systems. Continuing our ethos of evolving design, ...

Torque: 10 Nm - 450 Nm

IQS is the 1-phase version of the IQ actuator. Direct torque range from 10 Nm to 450 Nm (7 lbf.ft to 332 lbf.ft). With second stage gearboxes, multi-turn output torque up to 9,700 Nm (7,154 lbf.ft) and part-turn up ...

Actuator force: 700 N

Special features Linear actuator with 6 mm, 12 mm, or 15 mm rated travel Force-locking connection with 6 mm and 12 mm rated travel, form-fit connection with 15 mm rated travel Optionally three-step version ...

Actuator force: 500, 2,500, 2 N

Special features SAM DIGITAL READY Linear actuator with 15 mm or 30 mm rated travel 15 mm version optionally with fail-safe action (actuator stem retracts or extends) Optionally ...

Actuator force: 300 N

Special features Linear actuator with integrated digital controller Force-locking connection to valves DHW heating control in instantaneous heating systems used in small to medium-sized ...

Torque: 4, 8, 20, 35, 50 Nm

... EBRO actuator series stands for.Pneumatic actuators, single or double acting, have been proven for decades. However, industrial process air is expensive. Energy efficiency is therefore the topic of the ...

Torque: 27 Nm - 9,768 Nm

... EBRO actuator series stands for. Pneumatic actuators, single or double acting, have been proven for decades. However, industrial process air is expensive. Energy efficiency is therefore the topic of the ...

Torque: 4, 8, 20, 35, 50 Nm

... many people know: EBRO produces its own actuators - and has been doing so for more than 40 years. For EBRO customers this means that butterfly and gate valves can always be equipped with the most suitable ...

Torque: 7 Nm - 132 Nm

CP Pneumatic Actuators are suitable for 90-degree opening and closing of WAM Butterfly Valves, WAM VSS-type Ball Segment Valves, as well as WAM DVA-type Diverter Flap Valves. CP ...

CRG-type Electric Gear Motor Actuators are suitable for opening and closing VLQ, VLC, VLR and VDI-type Slide Valves. LSM 6-type limit switches are mandatory for the opening and closing of the Slide Valves. ...

... Electric Actuators are gear motor drives suitable for opening and closing VG-type Slide Valves. AR actuators come with a splined shaft coupling bush according to DIN 5482. Benefits ...

Torque: 9 Nm - 4,800 Nm

... 250, 400 are other features. It operates at -30°C to 100°C with a 90°rotation angle. They can be mounted directly to the valve flange with bolts and screws, or via mounting kits with adaptor pin and bracket. It uses ...

Mounting: #15/32-32 female thread to mount to Clippard Minimatic® valves and components; no spacers or washers are required when assembled to any Clippard valve; may be used with 15018-2 mounting bracket

Actuator force: 1 N

Mounting: #15/32-32 female thread to mount to Clippard Minimatic® valves and components; no spacers or washers are required when assembled to any Clippard valve; may be used with 15018-2 mounting bracket

Actuator force: 2,300 N - 25,000 N

This electric actuator is connected to a valve that allows it to be operated at a distance by an electrical pulse. It has an extensive range of electric actuators.

Pneumatic valve actuators of this type can change their position. Made for mobility, this valve can move and change position depending on the amount of air pressure being applied to a ...

Torque: 1 Nm - 20 Nm

Elster Kromschroeder GT reversible gear motors are useful for transmitting rotary movements. With a torque of 1.2 to 20 Nm, the gear motors provide operating times between 3.7 to 214 seconds. The gear motors are equipped with voltage-free ...

Torque: 3 Nm - 30 Nm

Elster Kromschroeder IC 20/IC 40 reversible gear motors are useful for transmitting rotary movements between 0 and 90°. IC 20 can operate between 7.5 to 60 seconds and it comes with voltage-free limit switches and automatic/manual ...

The ER5000 Series is a microprocessor based PID (Proportional, Integral, Derivative) controller that brings precise algorithmic pressure control to a wide range of applications. It can be used as a standalone unit to control the pressure ...

Torque: 8,000 Nm

Design Single-acting pneumatic actuator for mounting on quarter-turn valves (butterfly valves or ball valves). Top flange to ISO 5211. Control pressure up to 8 bar. Can ...

Design Double and single acting hydraulic actuators for mounting on quarter-turn valves (butterfly valves or ball valves). Top flange to ISO 5211. Control pressure up ...

Design Manual actuators for the operation of quarter-turn valves. MN range manual gearbox, worm gear kinematics, operation by handwheel. Application Building services, industrial processes, water and ...

Actuator Type: Spring Return Actuator Size: Medium Rotery Angle: 90° Body Material: Aluminum Max Operating Pressure: 8 bar (116 psi) Max Temperature: -32° to 90°C (-25.6° to 194°F)

This ZA2TS uses a spring-return actuator of medium size as well as a 180-degree rotary angle. Housed within an aluminum body, it works at 8 bars or 116 psi of pressure. Its rugged construction enables it to tolerate ...

If you are looking for a spring return actuator that can be suited to a wide range of applications, the Large 90°C Aluminum Actuator is the one to buy. With an extra large size and a rotery angle of not ...

Torque: 3 ft.lb - 1,375 ft.lb

The NEW-FLOW D-C / S-C series, double acting / spring return actuators feature operating pressures ranging from 40 to 120 PSIG, with the maximum operating pressure of 150 PSIG. They are used for dry or lubricated non-corrosive ...

Torque: 40 Nm

SINGLE ACTING PNEUMATIC ACTUATOR - STAINLESS STEEL 304

Torque: 5 Nm - 150 Nm

Electrical, explosion proof quarter turn (90°) actuators series ExMax and RedMax for automation of ball valves, butterfly valves and mixing valves. - 5 Nm up to 150 ...

Actuator force: 500 N - 3,000 N

Actuator with spring return for linear valves ExMax.. + LIN Highlights: - Spring return safety function for linear valve actuation - Force 500 N up to 3.000 N - Installation in hazardous ...

Actuator force: 500 N - 10,000 N

Electrical, explosion proof linear motion actuators series ExRun and RedRun for automation of valves and other linear motion armatures. - 500 N up to 10.000 N - 5-60 mm stroke - Certified according to ...

Torque: 9 Nm - 5,162 Nm

TORK high preformance pneumatic actuator can produce with PTFE coating. This type of actuators can be used in an environment with high humidity, rain and in places open to external influences such ...

Torque: 9 Nm - 5,162 Nm

RAM ... DA/SR Series Arctic Rotary Pneumatic Actuators Application: Ball Valve, Butterfly Valve, Plug Valve, Dampers on-off / proportional control Size: RAM 32 ...

Torque: 9 Nm - 5,162 Nm

TORK RX Series ATEX certificated Actuators Application: Ball Valve, Butterfly Valve, Plug Valve, Dampers on-off / proportional control Size: RX 32 DA … RX 350 DA ...

Torque: 7 Nm - 3,234 Nm

The YR2 series engineered by Univer, is a rotary actuator, intended for process automation applications. This device can be a double acting or a simple acting version that makes use of air or water as its medium. In addition, ...

SISTO-C Pneumatically operated Valves Features ● Piston actuator ● Valve bonnet in compact design, actuator housing and valve bonnet manufactured ...

SISTO-C Bonnets with piston actuator MD 168-202 Features ● Piston actuator ● Stainless steel actuator housing ● Stainless steel bonnet ● Stainless steel stem ● Clear visual position ...

SISTO-C Manually operated Valves Diaphragm size 30 Features ● Plastic handwheel PA6GF30 ● Handwheel with recessed grip ● Integrated travel stop in close direction ● Stainless steel position indicator ● Rising ...

Compact design IN BUILT Linear cylinder 2”to 6” bore Stroke up to 8” Megneto resistive feedback ON OFF or regulating application Fail safe open to fail safe close or vice versa can be done at site Speed regulator built in

Input signal 4 to 20 mA Output signal 4 to 20 mA Discrete control design Cylinder bore up to 20” Stroke up to 2 m Megneto resistive feedback

Torque: 63 Nm - 600,000 Nm

Hydraulic system with rotary quarter turn actuator 63 Nm to 600000 Nm torque Heavy Duty, High-performance, Internal tie rods, Female shaft drive Local /remote operation Discrete control design Pump pressure switch

Worm & Bevel Gear Operators Manufacturing valve operator has a manual multi-turn actuator. This valve is commonly used with a butterfly valve, check valve, ...

The Chinabase manual actuators an multi-turn actuators are constructed in a WCB, HT200, and D2, A148 design. These are suitable for use in conjunction with gate valve, check valve, ...

The Chinabase manual actuators and multi-turn actuators are constructed in a WCB, HT200, and D2, A148 design. These are suitable for use as gate valves, check valves, ...

Torque: 15 Nm - 760 Nm

Thanks to their long life batteries, modec electric portable valve actuators are able to deliver a high power for more than 30 minutes. This means they are not dependent on an energy source (electric ...

Torque: 41 Nm - 700 Nm

modec gas portable valve actuators can be used in total autonomy – the only limit being the available petrol supply. They are particularly suitable for use in isolated outdoor places. Extremely robust, ...

Torque: 10 Nm - 680 Nm

modec pneumatic portable valve actuators are the most compact, light and powerful. They offer a wide choice in terms of power and can be used in all environments, even the very difficult ones. You can ...

Characteristics Tensions, 24V, 110V, 220V, 380V. WITH: •Torque limit (fusible). •Emergency hand wheel. •4 limit switches 5° adjustable. •Grade of protection IP-65.

Hand operated Automated valves & control accessories Characteristics Wheel. Gearbox

Characteristics •NAMUR box with Electromechanic or Inductive limit switches. •Electromechanic. •Inductive EExD.

Torque: 60 Nm

Electrical actuator. Compact and low weight due to high grade aluminium alloy for housing. Various output torques and usable for a wide range of voltage.

Torque: 150 Nm - 3,000 Nm

Electrical actuator. Compact and low weight due to high grade aluminium alloy for housing. Various output torques and usable for a wide range of voltage. (Option: ATEX)

Torque: 125 Nm - 16,200 Nm

Hydraulic actuator with 90° turning. Available in 8 sizes - from 125 Nm to 16200 Nm. 135 bar. Can be supplied with power-pack, so only power must be connected to the device. Suitable for large valves ...

Torque: 7 Nm - 4,803 Nm

... to ”small” Butterfly valves and all types of Ball valves. The actuators comply fully with all the relevant industry standards for interfaces and connections such as ISO 5211, DIN 3337, ...

Torque: 133 Nm - 1,655 Nm

... , which is interchangeable with a wide range of valves, makes it perfect for direct mounting and for stock keeping. This actuator is generally recommended to ”large” Butterfly valves. The ...

Torque: 1,500 Nm - 250,000 Nm

▪Fabricated entirely in low temperature carbon steel (no casted parts). ▪Compleately waterproof ▪Spring system designed for safe maintenance & smooth linear compression. ▪Avalible in Double Acting & Spring Return. ▪Possibility for ...

Torque: 30 Nm

In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. Features robust, water-resistant body made of aluminium optical ...

Torque: 50 Nm - 2,500 Nm

In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. A waterresistant body with overload protection and a heating ...

Torque: 60 Nm - 2,500 Nm

In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. A waterresistant body with overload protection and a heating ...