Hydraulically-operated valves

Pressure: 350 bar
Flow rate: 30, 75, 150, 320 l/min

... . As a screw-in valve, type CLHV-C can either be installed at the manifold, in the pipe, or directly at the cylinder or hydraulic motor. Type CLHV-PIB can either be installed in the pipe or directly ...

Pressure: 420 bar
Flow rate: 80 l/min

... more finely adjusted than with conventional load-holding valves. Features and benefits: •Operating pressures up to 420 bar •Various damping elements that are combined with one another •Available ...

Pressure: 400, 360, 350 bar
Flow rate: 20, 60, 100 l/min

... controls the opening of the valve to achieve the required lowering velocity. The load-holding valve type LHK is suitable for applications that are not particularly prone to oscillations. Shock valves ...

Temperature: 0 °C - 120 °C
Pressure: 1,035,000, 700,000, 1,400,000 Pa
DN: 80 mm - 1,350 mm

... and corrosion resistance, the Isogate® WB series heavy duty slurry knife gate valve combines a low maintenance design with a wide range of available materials making the valve suitable for a variety of ...

Pressure: 10, 100 bar

... Rotork manPOWER range high-integrity failsafe valve operation without the need for any power supply. The self-contained system is suitable for workshop or mounting on a wide range of rotary and linear operated ...

Pressure: 4,000 psi

The Lee Company's new 375 Bypass Valve is designed to shunt flow across an actuator piston when the system pressure is either shut off or lost. This miniature valve is normally open, with a hydraulically-actuated ...

Temperature: 120 °C
Pressure: 10, 6, 4 bar
DN: 50 mm - 1,600 mm

Our sister company in Sweden Stafsjö Valves develop and manufacture high performance shut-off valves for pulp lines in pulp and paper mills, mineral processing and tailing systems in the mining industry, ...

Temperature: 120 °C
Pressure: 10 bar
DN: 50 mm - 600 mm

Our sister company in Sweden Stafsjö Valves develop and manufacture high performance shut-off valves for pulp lines in pulp and paper mills, mineral processing and tailing systems in the mining industry, ...

Pressure: 4, 16, 10, 6 bar
DN: 50 mm - 1,600 mm

Our sister company in Sweden Stafsjö Valves develop and manufacture high performance shut-off valves for pulp lines in pulp and paper mills, mineral processing and tailing systems in the mining industry, ...

Pressure: 20 bar - 315 bar
Flow rate: 0 l/min - 180 l/min

... 3. Check valves These valves are switching valves. They allow flow in one direction and block it in the opposite direction. 4. Accumulator charging valves These valves ...

Pressure: 0 bar - 315 bar
Flow rate: 0 l/min - 150 l/min

... behavior of the system. The following valves are available in the sandwich plate design: Pressure-relief valves Pressure-reducing valves Check valves Hydraulic ...

Pressure: 0 bar - 280 bar
Flow rate: 0 l/min - 1,500 l/min

... Voith servo valves (electro-hydraulic amplifiers), the current actuator position is fed back using a direct mechanical linkage and consequently in real time. This feedback uses either a gear rack, a spindle ...

Flow rate: 800 l/min

Hägglunds offers a wide range of valves, including single-function and integrated winch models. The latter combines multiple functions for a specific type of system. For closed hydraulic systems, the ...

Flow rate: 480 l/min - 2,000 l/min

The main task performed by Hägglunds load control valves is to manage hydraulic systems. These valves ensure perfect tandem between brakes of the loaded hydraulic systems ...

Flow rate: 600 l/min - 1,000 l/min

... used for shooting out the net in case of trawling applications. Most of these valves can be used for open systems and also for closed systems. There is also a control valve, used in case of open systems, ...

Pressure: 15,000 psi
DN: 3 in

The SPM® EXL Plug Valve is a quarter-turn isolation valve, making it easy to isolate specific pumping units or portions of a flow line from the pumping system. Overview The SPM® EXL plug valve ...

Pressure: 15,000 psi
DN: 1 in - 4 in

SPM® plug valves act as quarter-turn isolation valves, making it easy to isolate specific pumping units or portions of a flow line from the pumping system. Overview SPM® plug valves ...

Temperature: -196 °C - 800 °C
Pressure: 20 bar - 100 bar
DN: 40 mm - 900 mm

... trim, available in inline globe, angle, Y and Z configuration. Overview The BV500 and 501 series are highly versatile valves, and as a result we are pleased to offer the following options to customers: Cage ...

Temperature: -50 °C - 260 °C
Pressure: 25 bar
DN: 50 mm - 1,200 mm

This is one of the most advanced double-offset butterfly valves, equipped with a metal or a plastomer-seat ring, depending on what suits you. The materials used, like stainless and cast steel, provide extra durability. It ...

Temperature: -10 °C - 200 °C
Pressure: 16 bar
DN: 40 mm - 1,000 mm

This centered disc butterfly valve is built with an elastomer liner. It has a lever, electric or hydraulic actuator, pneumatic, and manual gearbox and is used for shut-off and control ...

Temperature: -250 °C - 200 °C
Pressure: 25 bar
DN: 50 mm - 1,400 mm

... butterfly valve for cryogenic applications. Side entry valve (BWSE) with weld ends to ASME or flanged body (T7) with raised/flat faces. Body made of stainless steel. Connections to ASME schedules 10S, ...

Pressure: 500 bar
DN: 0.75, 0.5 in
Flow rate: 120, 80 l/min

Constant openning valve, 3 way, made in steel for working with high pressure

Bypass valve with pressure regulator valve, can be utilized in applications where the pump is operating constantly

Temperature: 50 °C
Flow rate: 0 l/min - 50 l/min

Pressure: 350 bar
Flow rate: 4 l/min - 45 l/min

Flow divider valves are self-regulating devices, that largely independent of the difference in pressure at the working ports A and B split an input flow QC entering at port C into two equal output flows QA and QB or maintain ...

Temperature: -20 °C - 100 °C
Pressure: 0 bar - 350 bar
DN: 0.25 in - 1.25 in

Two-way and three-way flow regulators. Available with or without compensated function and with or without check valve. Flow rate from 5 to 150 l/min. Max working pressure 350 bar. VDF – Spool-type flow dividers and unifiers. Flow ...

Temperature: -20 °C - 100 °C
Pressure: 0 bar - 350 bar
DN: 0.25 in - 1.25 in

Two-way and three-way flow regulators. Available with or without compensated function and with or without check valve. Flow rate from 5 to 150 l/min. Max working pressure 350 bar. VDF – Spool-type flow dividers and unifiers. Flow ...

DN: 0.125 in - 0.5 in

Pressure: 700 bar

Pressure: 700 bar
DN: 0.25, 0.375 in

Pressure: 400 bar

... body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. Application: The stop valve shuts ...

Pressure: 0.5 bar - 6 bar

Micro-spray valve, super-compact size, ideal for any application with low viscosity fluid. Wide range of extensions available

Pressure: 24.5, 245 bar

... Clamptek CSV hydrulic sequence valve is designed to provide reliable and exceedingly efficient performances. The masterful design has been patented and its high quality is endorsed by its loyal and expanding customer ...

... Model 700-2S is a hydraulic control valve designed to inhibit the return flow and to facilitate a one-way zone backup. It is equipped with a diaphragm actuated control valve that has ...

DN: 24 in - 36 in

The BERMAD Series Control Valves are hydraulically operated and diaphragm actuated globe pattern valves. These valves have two major components, the ...

The model 720 is an advanced pressure-reducing valve, which is entirely hydraulically-operated, being able to reduce higher upstream pressure to lower constant downstream pressure, regardless ...

Pressure: 200 bar
DN: 0.375 in
Flow rate: 20 l/min

FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. Application It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited for in-line installation. Specifications FR1-06-KD ...

DN: 144 in

Red Valve manufactures the Series G in line sizes up to 144" for large-diameter pipeline installations. Large Series G valves are constructed similarly to smaller valves but feature a ...

Pressure: 10,000, 15,000 psi
DN: 1.813 in - 7.063 in

Industry-leading reliability and performance Cameron frac valves have earned a reputation for quality and reliability. Gate valves in frac trees and manifolds frequently flow and control high-pressure, ...

Temperature: -20 °C - 200 °C
Pressure: 630 bar
DN: 0.25 in

... Series 621 test point, Oleotec has designed an innovative and reliable product. Compared to the conventional ball valves with a metal/metal sealing, the poppet valve version with its ...

Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 250 l/min

... the other line. pressure regulating valves are available with an operating pressure range of 4 to 250 bar one way non-compensated throttle valves are adjustable by means of a grub screw. pressure regulating valves ...

Temperature: -40 °C - 110 °C
Pressure: 500 bar
DN: 8 mm

... directional seat valve, direct operated with solenoid actuation KSDE.8 N/P (High Performance) Size 8 Component series B Maximum operating pressure 500 bar Maximum flow 5 l/min Features Direct ...

DN: 0.375 in - 1 in

Get the most out of hydraulic systems with pneumatic in-line, three-way Airflex Quick Release Valves (QRVs) from Eaton. Engineered to automatically close upon pressurization and open ...

Pressure: 220 bar
Flow rate: 60 l/min

Hitch control valves for the electrohydraulic lifting unit control and header height control in agricultural machines Proportional valves in flanged design Optimally matched components ...