DN: 76, 92 mm
Pressure: 2.8 bar
Temperature: 125 °C
... ignition will not work. The engine will overspeed, leading to mechanical failure or explosion. The 4260 Air Intake Shut-off Valves effectively shuts down a runaway diesel by closing off engine intake air. Features and Benefits ...
DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C
... off the flow of gas as the pressure increases or decreases below the affixed rate. The sleeve type valve does not need outer bypass in opening the valve. It has various Pressure Equipment Directive 97/23/EC categories ...
DN: 8 mm - 80 mm
Pressure: 64 bar
... Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions. ...
Schwer Fittings
DN: 10 mm - 100 mm
Pressure: 16, 10 bar
... • Threaded seal-carrier for upstream maintenance without emptying the system. • Handle built-in tool for easy adjustment of the threaded seal-carrier (and ball torque). • “Antiblock” system that avoids ball blockage. • 100% factory tested. • Minimal ...
Cepex SER
Pressure: 10 bar
Temperature: 135 °C
... Aseptomag® single-seat sampling valves are used for the safe sampling in UltraClean and Aseptic processing plants. When not actuated, the internal assembly seals the valve seat in a leakage-free manner and thus enables ...
DN: 1 in - 2.5 in
Pressure: 70, 100 bar
Flow rate: 80, 1,600 l/min
... Characteristics Type AA - Female Threads Type ED - Swivel Nut TypsizeQ max.P max. B31½”/2”800 l/min (211 US gpm)100 bar (1450 psi) B52½”1600 l/min (423 US gpm)70 bar (1015 psi) Connection possibility: - 1”, 1¼", 1½", 2" and 2½" - M36x2, M45x2, M52x2, ...
Pressure: 30 psi - 150 psi
... Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when pumping downhill ...
DN: 40 mm - 125 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
... The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. The lever ...
ASA technology Produktions- und Vertriebs GmbH
DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C
... Features •Maximum mounting flexibility •Superior corrosion resistance •Extended lifetime •Minimized operating costs Specifications •Design - ISO/DIN •Nominal Pressure = 10 bar •Disc Lining = PFA •Body Lining = PTFE •Housing Material ...
DN: 8 mm - 100 mm
Pressure: 63, 40, 25 bar
Temperature: -25 °C - 180 °C
... industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M ...
SOCLA
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C
... Contact sealing Heat EPDM Disc material Ductile iron GGG50 coated Connection between flanges Operating system Lever ...
TECOFI
DN: 0.5 in - 2 in
Pressure: 25, 16 bar
Temperature: -5 °C - 90 °C
... temporarily dunng 1 hour max ) • - Max Pressure Ps ( excepted drain valves types ) : 40 bars up to DN 3/4*, 25 bars from 1“ to 1*1/4.16 bars over • - Max pressure Ps for drain valves types : 25 bars from 1/2* to 1"1/4. ...
SFERACO
DN: 12 mm
... This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have diameters ranging from 8 - 50 ...
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 180 °F
... TAC Miniature Toggle Valves are miniature pneumatic 2, 3 and 4-way valves available in 10-32 UNF and 1/8 PIPE sizes. Compact and rugged, TAC Toggle valves provide excellent flow, and are designed for ...
Humphrey Products
DN: 0.125, 0.25, 0.375, 0.5 in
... Valve Code 4R: 5/2 Hand Pull Valve 3R: 3/2 Hand Pull Valve Series Code 2:200 Series 3:300 Series Position 10: Single Head Double Position Thread Blank: G Thread T: NPT Thread PT: BSPT ...
DN: 0.25 in - 3 in
Pressure: 0 bar - 63 bar
Temperature: -25 °C - 180 °C
... TECHNICAL INFORMATION1. Stainless steel full port ball valve, 2 pieces2. Thread ends according gas EN 10226-1 (EX ISO 7-1 e DIN 2999)3. Made of AISI 316 (CF8M)4. Ball seats PTFE + 15% G.F.5. Blow-out proof stem6. Viton o’ring stem7. Stem ...
Intertubi
DN: 32 mm - 50 mm
Temperature: -30 °C - 100 °C
... This Industrial valve is a ball valve GB 2-way type characterized bya round body. Ball seats measure from DN32 to DN50 with O-rings in NBR, FKM, EPDM and MVQ. This ball valve works with an operating pressure ...
Gemels S.p.A.
DN: 0.375, 0.5 in
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 100 °C
... PEKI vertical valve series is made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany. Short design with vertical lever arm ...
DN: 0.5 in - 10 in
Temperature: -29 °C - 120 °C
... ball valves manufactured to API, ASME, DIN And JIS standards. - Usually furnished with flanged end connection. - Due to the low-pressure ratings and small sizes, the torque t o open or close the valve is not big hence ...
Athena Engineering S.r.l.
DN: 4 mm
... The control valve in the cab has 4 positions, which is used in conjunction with the power take-off to realize the lifting, middle stop, lowering and power take-off functions of the vehicle. Technical data: 1: Pneumatic control range ...
Weifang Chengfeiyue Hydraulic Machinery Co., Ltd.
Pressure: 35, 32 MPa
Flow rate: 90, 120, 180 l/min
... FS Series Flow Sharing Valve Rated pressure：32/35 MPa Rated flow：90/120/180 L/min Applications Wheel excavator Crawler excavator ...
Pressure: 10 bar - 63 bar
Temperature: 180, 150 °C
... to the valve, the system shuts down and the flow is interrupted. Ball valves are primarily preferred in places that open and close frequently or need to be opened and closed quickly. Ball valves are ...
Pressure: 1 bar - 20 bar
Temperature: -20 °C - 80 °C
... Next Gen AutoFireX® Isolation Ball Valve is utilised for all operation/ isolation/filling/ pressurising and recharging on all DLP/ILP Valves. ...
DN: 0.5 in - 6 in
Temperature: -20 °C - 150 °C
... * In strict accordance with the standard of GB, JB, JIS, ANSI, KS, BS, DIN, API and etc. * Certification: ISO9001, BSCI, CE, ROHS, FCC, FDA etc ...
Yongkang Yonlin Industry & Trade Co.,Ltd Yongkang Lianggong Valve Co., Ltd.
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C
... Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. Due to the wafer type connection ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
DN: 0.5, 0.75, 1 in
... BALL VALVE with connections: female thread G and male metric thread M with food NBR O-ring Connectivity standard External thread metric Connectivity standard Internal thread GAS cylindrical ISO 228/1. Full bore The hole of the ...
Bucchi S.r.l.
DN: 0.25 in - 2 in
Pressure: 0 psi - 125 psi
... Weight - 0.595 lb Seat - RTFE Construction Chromium plated ball RTFE seats and stuffing box ring Features Blow-out proof stem design Adjustable packing gland Specifications Vent downstream air in accordance ...
... Full Material Offering: Bronze, Brass, Lead-Free Brass, Carbon Steel and Stainless Steel 100% Factory Testing for Quality Assurance Fully-Rated and Certified MATERIALS OF CONSTRUCTION Bronze Brass Lead-Free Brass ...
Crane Process Flow Technologies GmbH
DN: 15 mm - 300 mm
Pressure: 150, 300 psi
... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way Ball Valve. ...
Marck And Care Engineers Ltd.
DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
... Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive fluids - Tanks ...
MARAN E PERACINI
DN: 6 mm - 50 mm
Pressure: 0.6 MPa - 0.8 MPa
Temperature: -20 °C - 100 °C
... BVMF series brass ball valve offers reliable flow control with a 90° quarter-turn operation, ensuring low flow resistance, zero leakage, and fast actuation. Made from high-strength H58/H62 brass, it provides excellent corrosion resistance, ...
Jufan Industrial Co., Ltd.
DN: 6 mm - 25 mm
... These valves are used to open or close oil flow in a circuit even with maximum pressure. Applications: Connect indifferently A or P to the ports where flow has to be blocked. Flow is blocked with lever at 90° (position ...
Ningbo Hoyea Machinery Manufacture
DN: 0.375 in - 4 in
Pressure: 28, 35, 42 bar
Temperature: 185 °C
Giacomini
DN: 15, 20 mm
Pressure: 16 bar
Temperature: 120 °C
... Brass ball valve Novo • - Brass ball valve, screwed ends • - Used for water, steam, gas, petroleum • - Blue color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: 16 bar ~ 16 kg/cm² • ...
DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C
... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, less than 1,0s ...
Gascat
DN: 1 in - 2.5 in
... TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism. ...
DN: 0.25, 0.375, 0.5 in
Pressure: 400 bar
Temperature: 150, 200, 500 °C
... Needle valves are designed for assembly, start-up and maintenance of transducers, pressure gauges and other fixtures in measuring and automation regulatory installations. Depending on the design, needle valves perform ...
DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C
... manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ball valves are ...
Meca-Inox
DN: 0.25 in - 4 in
Pressure: 68 bar
Temperature: 0 °C - 230 °C
... Stainless steel ball valve Elephant BV.T.Fp.316.230 986 psi, full port, threaded connection, with handle is used as shut-off valves in heat supply systems, water supply, steam, fuel systems with compressed air and neutral ...
the best suppliers