Lever valves

DN: 0.25 in - 3 in

... Manual 2-way vacuum valves These manual valves are used for intercepting vacuum in all those plants where solenoid valves cannot be installed. They feature a die-cast nickel-plated brass body, a chromed ...

DN: 0.25 in - 1.5 in

DN: 6 mm - 40 mm
Pressure: 1.5 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...

DN: 6 mm - 40 mm
Pressure: 40 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...

DN: 20 mm - 100 mm
Pressure: 1.5, 10, 40, 25 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation length and connection). Ball ...

DN: 0.125 in
Pressure: 0 psi - 500 psi

... miniature 1/4-28 threaded selector ball valve is an excellent choice for applications requiring a port selection valve. The MBVT-1414 allows bi-directional flow between a common inlet port on the bottom of the valve, ...

Pressure: 15 bar
Temperature: 0 °C - 60 °C

... easily maintained through the use of the lever handle. The valve's 45° inclined design affords a uniform mixture of air and abrasive, with its locking not allowing users to define the rate of flow through the valve. Maintenance ...

... pneumatic Remote Control Valves allow you to control the flow of compressed air directly from the blast nozzle using a deadman's handle. Designed and built in Great Britain out of high grade, non-corrosive aluminium, the valves ...

... FIP has developed a TKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. TKD is a True Union diverting and mixing ball valve that meets the most stringent ...

DN: 40 mm - 200 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 60 °C

... The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System. Main features: Ergonomic multifunctional handle in HIPVC with ...

DN: 40 mm - 200 mm
Pressure: 16, 10 bar

... The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and longterm reliability. This valve is also equipped ...

DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

... Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain functions 5/2 ...

DN: 0.25 in - 2 in
Pressure: 800, 1,000 psi
Temperature: -5 °C - 175 °C

... A351 CF8M / 316 Connection Type: Thread Locking Device: Valve operated locking in open or closed position Working Pressure Limited: 1000psi (70kg/cm2) for 800psi (56kg/cm2) for 1-1/4”~2”; Valves inspected and tested ...

DN: 0.25 in - 4 in
Pressure: 800, 600, 1,000 psi
Temperature: -5 °C - 175 °C

... weld ends available Locking Device: Valve operated locking in open or closed position Working Pressure Limited: 1000psi (70kg/cm2) for 1/4"~1"; 800psi (56kg/cm2) for 1-1/4"~2"; 600psi (42kg/cm2) for 2-1/2"~4" Valves ...

DN: 8 mm - 100 mm
Pressure: 600, 1,000, 800 psi
Temperature: -5 °C - 175 °C

... 316 Connection Type: Long butt weld ends Locking Device: Valve operated locking in open or closed position Blow-Out Proof Stem & Solid Bail Working Temperature Limited: -20℉~350℉ (-5℃~175℃) Valves inspected and tested ...

DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min

... Circuit selector valve, manual operation maximum pressure ...

DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min

... Constant openning valve, 3 way, made in steel for working with high pressure. ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

... The GEMÜ 487 Victoria soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox depending on customer requirements. The butterfly valve is available in nominal sizes DN 25 ...

DN: 25 mm - 1,600 mm
Pressure: 0 bar - 16 bar
Temperature: -60 °C - 210 °C

... The GEMÜ D487 Victoria Is manually operated. It has a metal hand lever or gearbox depending on customer requirements. The butterfly valve is available in nominal sizes DN 25 to 1600 in standardized installation lengths: ...

DN: 50 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 160 °C

... The GEMÜ R487 Victoria Seated metal butterfly valve is manually operated. It has a hand lever or gearbox depending on customer requirements. The butterfly valve is available in nominal sizes DN 50 to ...

DN: 16 mm

... In-line valve VS 16, stainless steel, small flange KF DN 16 The VS und VS C series valves are butterfly-type valves. A circular valve plate with a sealing ring on the circumference rotates ...

DN: 16 mm

... Valves of the VK series are sturdy isolation devices for the rough and fine vacuum range. A precisely machined ball with a hole through the middle is rotated by means of shaft and lever. When the valve ...

DN: 6, 4, 8 mm
Pressure: 10, 6 bar
Temperature: -5 °C - 50 °C

... QUICK EXHAUST VALVE ► For higher piston speeds for cylinders ► To bring about quick-action ventilation, the valve must be installed as close to the cylinder's air connection as possible ...

DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C

... BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316 ...

DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C

... MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316 ...

DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C

... 1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316 ...

Temperature: -10 °C - 95 °C

... Tork's T-PKV .W812 is a butterfly valve which is made up of PVC with an extensive pressure of 10 bar and a maximum temperature that ranges from -10 up to 95° C. The unit has EPDM,VITON for its seal. The butterfly valve ...

Pressure: 10 bar
Temperature: -30 °C - 130 °C

... L1140 LUG screwed hole butterfly valve is designed for use in heavy duty industrial operations. Constructed with epoxy coated GG 25 casting iron, the valve is equipped with EPDM standard seals and an AISI 420 stem. ...

Pressure: 16, 40 bar
Temperature: -20 °C - 140 °C

... with 3-way ball valves screwed connection that can be mounted and has two slide flow and the o-ring is PTFE. The w-temperature is -20 up to 140 degrees and the w. pressure is PN 40 bar or 1/2"..11/4" and 16 bar or 11/2"...3". All valves ...

DN: 2 in - 8 in
Pressure: 0 bar - 284.4 bar

... FVF, a Foot Valve with Strainer and clean lever that make removing of debris easy. It is used in any water pump system pipelines, also served as a check valve function to prevent backflow. What is ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C

... Model ATRF, This model include a manual lever for quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection function to release ...

Pressure: 10,000, 15,000, 20,000 psi

... Panam HP Ball Valves in SS 316 across three pressure series — HP (10,000 psi), HP1 (15,000 psi), and HP2 (20,000 psi). 2-Way, 3-Way 180° Turn, and 3-Way 90° Turn Diverter configurations. NPT Female and MP Cone & Thread Female connections. ...

DN: 3.175 mm - 25.4 mm
Pressure: 689.5 bar - 4,136.9 bar

... Overview
Panam HP needle valves in SS 316 are available in five pressure series (HP, HP1, HP2, HP3, HP6) for high‑pressure fluid and gas systems. Thread options include NPT, MP Cone and HP Cone. Body configurations comprise ...

DN: 3.175 mm - 50.8 mm
Pressure: 0 bar - 689 bar

... pressure. Seat options: Delrin, PTFE, PEEK & KEL-F. Anti blow-out internally loaded stem for safety. Panel mount and lever handle option available in selected sizes. NACE certification available upon request. Heat code ...

DN: 0.125, 0.25, 0.375, 0.5 in

... Valve Code 4R: 5/2 Hand Pull Valve 3R: 3/2 Hand Pull Valve Series Code 2:200 Series 3:300 Series Position 10: Single Head Double Position Thread Blank: G Thread T: NPT Thread PT: BSPT ...

DN: 6, 3, 4 mm
Pressure: -750 mm/Hg - 5,250.4 mm/Hg
Temperature: 0 °C - 60 °C

... Ball Valve turns on and off air pressure to pneumatic devices. Easily adjustable lever with scale. The flow rate can be adjusted roughly by setting the angle of the lever. ...

DN: 4 mm - 16 mm
Pressure: 0 MPa - 5.5 MPa
Temperature: -29 °C - 232 °C

... off the valve body. Prevent stem come-off from valve body. No restriction for flow direction. IN/OUT flow can be connected to both side of valve. Oil-free for all parts. There is no intentional ...

DN: 10 mm - 50 mm

... Manual inline ball valve equipped with AISI 304 flanges and Teflon® seals. Natural finish.

Main details

• Line: KF
• Line type: KF
• Product type: Valves
• Finish: Natural
• Materials:

DN: 32 mm - 1,400 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 180 °C

... knife gate valves experts, Flowrates will provide the finest solutions to your process. Our extensive range of knife gate valves enables our customers to solve problems on site trough our solutions. They are available ...

DN: 80 mm - 1,200 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -50 °C - 220 °C

... BVD01 are characterized by unparalleled performance and quality in the range of high performance double offset butterfly valves. Optimized lip-type seat can automatically compensate for temperature and pressure variations. It has a ...

DN: 50 mm - 600 mm
Pressure: 4 bar - 10 bar
Temperature: 0 °C - 80 °C

... PVC-U body. PP / PP-GF • Gaskets in EPDM or FPM • Possibility of electric motor or pneumatic actuator DA, NA, NC • Manual lever actuation or with plastic reducer steering wheel Advantage • Direct mounting of pneumatic or electric ...

DN: 50 mm - 400 mm
Pressure: 6, 10 bar

... and PVDF materials • Actuation by manual lever or reducer steering wheel • Possibility of electrical or pneumatic actuation DA, NA, NC • Electro Positioner 4-20mA or limit switch box position indication • Lever manual ...

DN: 50 mm - 600 mm
Pressure: 6, 5 bar

... PVC-U, PP and PVDF • Actuation by manual lever or reducer steering wheel • Possibility of electrical or pneumatic actuation DA, NA, NC • Electro Positioner 4-20mA or limit switch box position indication • Lever manual ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...

Pressure: 10 bar - 63 bar
Temperature: 180, 150 °C

... to the valve, the system shuts down and the flow is interrupted. Ball valves are primarily preferred in places that open and close frequently or need to be opened and closed quickly. Ball valves are ...

DN: 40 mm - 1,600 mm

... be sufficient to remove the lever and add some pneumatic, electric and hydraulic actuators to the valves. But what is the difference between WAFER butterfly valves and LUG butterfly valves? The ...

DN: 25 mm
Pressure: 40, 25, 16 bar
Temperature: -20 °C - 120 °C

... Ball valves, unlike the types of valves previously mentioned, use an opening and closing action. Thanks to a specific valve, moreover, it performs a rotation limited to an angle of 90°. Ball valves ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

... Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive fluids - Tanks ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

... Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim position indicator drain plug max 150°C 13 BAR. Made in Italy. Fields of application: Industrial plants - Sea water - Fuel - Aggressive fluids - Tanks - Shipyard. ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C

... Cast iron (GJL 250) PN 16 gate valve flat body OS&Y bronze trim with proximities. High temperature. Made in Italy. Fields of application: Industrial plants - Sea Water - Fuel - Aggressive fluids - Tanks - Shipyard. ...

DN: 8 mm - 50 mm
Pressure: 25 bar - 50 bar
Temperature: -20 °C - 150 °C

... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials series 20, 21, 30, 31, DVGW series 40,41, Ball- valve with air vent Thread Cyl. ...

DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C

... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Actuation up to max. 8.4 bar Materials Ball made of brass (Ms58), chrome layer Handle made of aluminium, painted Seal ...