Pneumatic valves

DN: 3 in - 24 in

... AIS-compliant knife gate valve is now available from DeZURIK. The AIS-compliant knife gate valve is based on DeZURIK’s successful KGC-BD design which is a cast stainless steel, resilient seated and bi-directional knife ...

Pressure: 175, 300 psi
Temperature: 180 °F

... main valve cover pressure to open deluge valve. once open the pilot valve must be "manually reset" in order to close the valve. The model 414-01 consists of a 100G/2100G Hytrol main ...

DN: 50 mm - 150 mm
Pressure: 16 bar - 40 bar

... hydraulic or pneumatic actuator piston Product Description In water mains of sizes DN 50 to DN 150, ERHARD Flow Control Valves in straight or angle pattern throttle and control showing excellent results. Globe type ...

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the solenoid valve, ...

... 0.375-24 UNF Purging Valve The BLD9243 Purging Valve provides a tire valve core in a lightweight minimum length housing. This valve may be used to purge or pressurize containers. See ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

... Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive fluids - Tanks ...

DN: 0.125, 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C

... Quick exhaust valve enabling high purge speeds to be reached ( valve technology) directly on the wiring circuit or cylinder supply port. ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... and resets locally. When the pneumatic dry pilot detection line is exposed to flame heat, its automatic fire sprinklers shatter-open, while venting the air pressure from the FDV-DP0’s actuator, commanding the deluge ...

... PDA Pneumatic Control Valves allow for direct remote control of individual friction modules simultaneously on a brake. Brake friction modules can turned on or off from the PDA to set brakes to run at varying torques ...

DN: 15 mm - 250 mm
Pressure: 25, 16, 10, 40 bar
Temperature: -196 °C - 450 °C

... diagnostics of “ valve-actuator” system due to application of smart electro- pneumatic positioners high tightness of closure due to application of soft valve seats (with PTFE seals in the whole range ...

Pressure: 29 bar
Flow rate: 12 ft³/min

... Shut off valve for individual control Easy connection to air hose ...

... The VGP slide valves are valves designed for heavy and particularly stressful applications. They are normally installed under hoppers, silos and tanks. Driven by pneumatic actuators, the run of ...

... Slide valves are used for complete closure of a pipe in the case of explosion, and therefore they are suitable for protection of production technologies with danger of dust explosion. Suitable for pneumatic conveying ...

Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C

... This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant which was installed ...

... Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation ...

DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C

... manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ball valves are ...

DN: 2 in - 12 in
Pressure: 10 bar
Temperature: 0 °C - 90 °C

... Knife gate valves are a specific type of gate valve that are typically used in industries for handling tough solids and slurries. Named for their shape, knife gate valves have a sharp, knife-like gate ...

DN: 160, 120 mm
Pressure: 15 bar
Temperature: -20 °C - 120 °C

... and air replenishment function, effectively eliminating cavitation noise generated by the main engine; 4. The intake valve integrates a relief valve, a makeup valve, and an inverse ...

Pressure: 64, 130 bar

... • Prevention of sticking-out of stem • Design of Inner Pressure-balance hole • Multiple Connection Screw Optional • Design Standard: ASME B 16.34,MSS SP-110 • Thickness: EN 12516-3 •Connection Screw: IS0228/1, DIN2999/259. BS21, ASME B1.20.1, JIS ...

DN: 50 mm - 1,000 mm
Pressure: 10 bar

... body make this valve a perfect choice for demanding applications (transport of very heavy fluids, food industry…). Sizes: DN 50 (2”) to 1000 mm (40”) Working pressure up to 10 bar, depending on size. Actuators: Handwheel, Pneumatic, ...

DN: 25.4 mm - 101.6 mm
Pressure: 0 bar - 0 bar
Temperature: 20 °C

... Pneumatic butterfly valve Size:1"-4" Clamp-type pneumatic butterfly valve criteria: DIN, SMS, ISO, 3A, IDF, RJT Clamp-type pneumatic butterfly valve ...

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... vacuum up to 10-2 mbar or liquids up to viscosity of max. 600 CST (mm2/s) Control: 1. pneumatic - lubricated and unlubricated and 50 µm filtered compressed air - port G1/8 2. electrical - ...

DN: 15 mm - 50 mm
Pressure: 10 bar - 25 bar
Temperature: -271 °C - -30 °C

... Easy replacement of the compatible valve inserts - Prepared for installation into vacuum-jacketed lines - Cryogenic valve and filter series (globe or control valve, filter) in standard execution - ...

DN: 15 mm - 150 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 350 °C

... Bellow control valve with pneumatic actuator and positioner zCON Material: Grey cast iron, nodular cast iron Working position: Vertical Features •high tightness (leakproofness class – A acc. EN -12266 – ...

DN: 50 mm - 300 mm
Pressure: 40 bar
Temperature: 180 °C

... operating cycles igh-performance valve with extended service life H2-ready OPERATION DETAILS The linear movement of the valve stem is generated by a strong pneumatic actuator which is energized ...

... normally used as a proportional slide gate. This modular gate allows the installation of various drive configurations - manual, pneumatic, or electric motor driven - on the same base frame. Grain size up to 8 mm High quality gate ...

... hydraulic or pneumatic pressure. The valve will be operated by a pressure reducing pilot valve to achieve constant outlet pressure, regardless of upstream pressure or flow variations. The valve ...

DN: 6 mm - 12 mm
Pressure: 40, 50, 45 bar
Temperature: 60 °C

... designated for control of quick-acting valves – design including or without regulating valve – suitable for single or double acting operating – meets all tests for use in nuclear energetics – medium – air Material stainless ...

DN: 50 mm - 1,400 mm
Temperature: -196 °C - 593 °C

... Product type On/Off Type Product description Top-entry Ball Valve Model SQ*47F/H Size NPS 2～NPS 56 ...

... Mounted Ball Valve With Pneumatic Actuator The smallest the fluid resistances among all valves even reduced-bore ball valves have relatively small fluid resistance. It also has good ...

Pressure: 150,000 Pa - 1,000,000 Pa

... at the bottom of water cup for auto dischargers, air filters and air filter regulators and can auto discharge the condense water gathered in the water cup. Feature Auto draimer Manual Drain Air ...

DN: 4 in

... The Liquip LBV450VGL Butterfly Valve has a lightweight and durable design that enables it to provide and control full flow through pipelines fitted with 100-mm (4”) Tank Truck Manufacturers Association (TTMA) flanges. Features & Benefits ...

DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C

... GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched advanced technology. ...

DN: 50 mm - 400 mm
Pressure: 5, 6, 7, 8, 10 bar

... Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, ...

DN: 50 mm - 600 mm
Pressure: 6, 8, 3, 4, 10 bar
Temperature: 230, 120, 200, 105 °C

... steel shut-off- valves are not necessary available in various seal types areas of application: one part gate valve for industrial use nominal diameters:DN 50 - 600 (2 - 24") material:ductile cast iron (EN-JS1050 ...

DN: 12 mm - 102 mm
Pressure: 16 bar

... 2 WAY THREADED PVC BALL VALVE WITH DOUBLE ACTING PNEUMATIC ACTUATOR 2 way full bore PVC ball valve - PN16- Body, ball and stem in PVC - PTFE seats - EPDM o-ring - Threaded F/F Gas - On-Off operation via ...

DN: 50 mm - 600 mm

... Use : Handling used/Gate used for the handling of solids (ganular, pulverulents…), and main application in exit of silo. Body shape : Wafer Type : 1511 Tightness: Metal/metal Face to face : According to manufacturer standard Operation point ...

DN: 655 mm
Pressure: 1.2 bar
Temperature: 50 °C - 120 °C

... dust. It's vailable with ISO 250 flanges in sizes 10" and can be operated in pneumatic or APC mode. This vacuum valve is usually designed as a gate valve or a pendulum valve, applications ...

DN: 100 mm - 400 mm

... Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive. ...