DN: 300 mm
Temperature: 20 °C - 150 °C
... Parallel Seal Slit Valve for High Vacuum • Long service life: 3 million cycles. • Low particle generation: Reduced by 1/5 or more. • Replaceable bellows. • Mechanical end lock. • Air consumption reduced by 22%. ...
Temperature: 5 °C - 150 °C
... Series XLA-2 are high vacuum angle valves for use in industrial applications employing high vacuum and process gases. Common industries that may use these angle valves include semiconductor, solar and other electronics ...
SMC Corporation of America
Pressure: 1.2, 1 bar
... gate valves are bellows sealed stainless steel gate valves for use in applications which require high leak tightness and a minimum of hydrocarbons in the vacuum system. Although principally designed for the isolation ...
EDWARDS
DN: 50 mm - 1,400 mm
Pressure: 25 bar
Temperature: -250 °C - 260 °C
... Triple-offset butterfly valve, metal-seated (fire-safe), without gland packing, maintenance-free, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of steel or stainless steel, full-lug ...
KSB
DN: 19, 30 mm
Pressure: 30 mbar - 5,500 mbar
Temperature: -30, -20, 66 °C
... The Type VS100 slam shut is constructed in such a way that it shuts off the gas flow to the downstream system when the outlet pressure goes above or declines below the predefined levels. Type VS100 slam shut has a ductile iron and steel body, and type ...
FISHER REGULATORS
Pressure: 17 psi - 1,016 psi
Temperature: 540 °F
... operated. The valve is normally spring-loaded open. Pressurized servo air is - fed to the valve from the solenoid bank in order to command the valve to shut-off or regulating mode. ...
DN: 0.125 in
Pressure: 21 bar
... The DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high viscosity fluids. ...
DN: 100, 150 mm
Pressure: 16 bar
... sizes Speeds operation of the dry pipe valve upon loss of air pressure For Use With DPV-1 Valves The Tyco® Model ACC-1 dry pipe accelerator attaches to the Tyco® Model DPV-1 dry pipe valve ...
DN: 15 mm - 50 mm
Pressure: 7, 10, 25 bar
Temperature: -10 °C - 185 °C
... electrical/optical position feedback to pneumatic control and integrated fieldbus interface. Maximum service life and tightness are achieved by the proven self-adjusting v-seal packing gland. The highly integrated system of valve ...
BÜRKERT FLUID CONTROL SYSTEMS
Pressure: 0 bar - 350 bar
Temperature: -30 °C - 120 °C
Flow rate: 40 l/min
... options Adjustable by allen key or hand screw, optionally sealable (lockwire holes) In the standard version, the valve is zinc-coated for 240 h protection acc. to ISO 9227 ...
ARGO-HYTOS
DN: 0.5 in - 2 in
Temperature: 14 °F - 356 °F
... Save space while maintaining flow rates with the compact Series SAV-BT Angle Seat Valve. The pneumatic, externally piloted angle seat valve is operated by a single acting actuator with a mechanical spring ...
DN: 20 mm - 500 mm
... The SD-Severe Duty valve is Copes-Vulcans premium severe duty and critical service control valve design. While virtually identical in outward appearance to the Copes-Vulcan legendarily rugged and dependable D-100 valve ...
DN: 5 mm - 9 mm
Pressure: 3 bar - 6 bar
Temperature: 0 °C - 50 °C
... Series 8 pneumatic operated valves are particularly suitable for applications requiring high flow combined wtih compact design. The valve is pneumatic operated by electro-pilots which ...
CAMOZZI AUTOMATION
DN: 15 mm - 200 mm
Pressure: 0 bar - 40 bar
Temperature: 0 °C - 400 °C
... demands an automatic valve that can reduce steam pressure accurately, reliably and at a cost to suit the application. Self-acting valves (can operate without the need of external power). Pneumatic signal ...
DN: 6 mm - 16 mm
... Ventilation elements Air valve, pneumatically activated Air Valve ...
DN: 0.25 in - 1 in
... Type - Tube Fitting Connection Size - 1/4” Connection Type - Let-Lok® Tube Fitting Body Material - Stainless Steel 316 CV - 1.2 ...
HAM-LET
DN: 40 mm - 300 mm
Pressure: 17 bar
Temperature: 50 °C
... The BERMAD Model FP 400E-3M Classic Deluge Valve includes a Manual EsayLock Reset for latching the valve open in response to an electric, hydraulic, pneumatic, or electro- pneumatic signal. ...
BERMAD CS Ltd
... conditions caused by traditional flow diversion valves, extending the life of the valve and surrounding process equipment. The W265 HTST valve assembly comes complete with 1 or 2 Microswitches in each ...
Waukesha Cherry-Burrell
DN: 40 mm - 150 mm
Pressure: 10 bar
... on multiple size ranges: DN40-DN65 (1.5-3.0) and DN80-DN100 (4.0) •Reduced CIP losses improve cost savings •Low air consumption and air supply requirements •Long housing ports ease manifold building •Integrated shaft ...
APV
DN: 4 mm - 50 mm
Pressure: 0 bar - 65 bar
Temperature: -20 °C - 150 °C
... Circulation in Harsh Environment • - Suitable for Low and High Temperatures Technologies: • - Industrial valves • - Pneumatic actuation • - Electric actuation Technical Characteristics: • - ...
Parker Legris
DN: 15 mm - 300 mm
Pressure: 16 bar - 63 bar
Temperature: -100 °C - 566 °C
... -shaped streamlined channel of valve body, enabling small pressure drop loss, wide adjustable range, high accuracy of flow characteristics, large guide area of valve element and good vibration resistance Various valve ...
Hollysys
DN: 50, 25, 40, 16 mm
Pressure: 5 bar - 7 bar
Temperature: 200, 50, 250, 80 °C
... The compact mini UHV gate valve featuring a modular actuator concept is well suited for industrial and R&D applications. It is often used in pipings of semiconductor process systems. ...
VAT Vakuumventile AG
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series - Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA Series ...
DN: 0.375, 0.07 in
Pressure: 0 psi - 250 psi
... The RPV is used to protect a pneumatic actuator such as a chuck, press, or gripper from sudden bursts of high pressure. The internal needle valve restricts the initial movement of the actuator to a user defined speed, ...
DN: 0.063, 0.125 in
Pressure: 0 psi - 300 psi
... Beswick’s stem actuated valve is available in 2-way normally opened, 2-way normally closed, and 3-way normally closed configurations. Working Pressure Range: The pressure range of the valve is 0 to 250 psig with a ...
DN: 0.125, 0.25 in
Pressure: 12, 19, 14, 20 psi
... pinch valve is designed to control fluid when it is advantageous to avoid fluid contact with mechanical components and elastomeric seals. This valve is designed for use with silicone tubing that is often used in medical ...
DN: 0.25 in - 1.5 in
Pressure: 0.5 mbar - 3,000 mbar
Temperature: -5 °C - 60 °C
... Servo-controlled 3-way vacuum valves These 2-position, 3-way valves feature pneumatically activated conical shutters. They can be used normally either closed or open. They are recommended in all the cases that require ...
the best suppliers