|
|
- contains RM40, RM50, RM84, RM84 SMD, RM85, RM85 inrush, RM85 faston, RM85 SMD, RM85 105 °C, RM87, RM87 SMD, RM96, RA2, RM960, RMB961, RMB962, RM699V, RM699H, RM63, RMB631, RMB632, RM64, RMB641, RMB642, RM83, RM92, RM93, RM94
- Range of rated load: from 5A up to 16A
- Range of coil voltage: from 5 up to 220 V DC and from 6 up to 380VAC
- Assembly: plug-in sockets for DIN rail or for panel, PCB |
|
| Yaskawa's Bestact high capacity 3 and 5 amp reed relays (RI & RZDR- series) offer industry DIP standard mounting format. They have UL/cUL recognition for gaseous Class I, Division 2 hazardous locations or corrosive environments and have been shown to significantly reduce downtime and/or maintenance costs. These relays have pilot duty inductive switch ratings of 360VA (AC), 69VA (DC) and horsepower ratings of 0.5 and 1/8 HP respectively. For low-level loads, they exhibit a wiping action that keeps contact resistance very low and stable. 2 and 4-pole configurations of normally open and normally closed contacts are available. |
|
High inrush currents with AgSnO contacts (TV4 = 65 A)
4 kV/8 mm coil-contact
Reinforced insulation (protection class II)
Ambient temperature up to 85°C at 8 A
Plastic materials according to IEC60335-1 (domestic appliances)
RoHS compliant (Directive 2002 / 95 / EC) as per
Applications
HVAC, interface technology, power supplies, TV-/Monitor control,
computer-/communication technology, domestic appliances, Hi-Fi
products, timers, etc |
|
SIP 6
The SIP6 series contains extremely powerful 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 16 A. Crown contacts for high switching reliability at the two readback contacts and 4 power contacts up to 16A and 60A surge currents. For the highest loads during 3-phase applications and DC loads.
- Contact mounting: 4NO, as power contacts 1NO / 1NC or 2NC signal contacts
- Switching current range 10 mA to 16 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 84.6 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: hydraulic controllers, construction machinery, lifting technology, off-shore applications, door control |
|
SIR 4 Power
The SIR4P contains extremely powerful, compact 4-pole power relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 12 A. 2 powerful contacts for loads with a high surge current (up to 60A) in the AC and DC range and 2 checkback contacts.
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 12 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.75 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: door controls, motion control, transportation, farm machinery |
|
| ... products without technical information |
| |
Safety Relays
Standard-PCB-Relays
Remote switch
PCB-Relays, bistable
Miniature Power Relays
|
|
| The Magnecraft 199 relay is the powerhouse open relay. Standard parts can handle up to 40A and there are options to handle up to 50A. The device is available in a variety of configurations and coil voltages. Available with up to two poles, double and single throws, insulated and noninsulated double make and/or break, and several switching forms. Options include auxiliary 10A switches with quick connects or screw terminals, quick connects on the coils and/or contacts, tungsten stationary contacts, fine silver contacts, pressure wire connectors on the output terminals and blowout magnets near the contacts for high voltage DC switching. |
|
SIP 6
The SIP6 series contains extremely powerful 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 16 A. Crown contacts for high switching reliability at the two readback contacts and 4 power contacts up to 16A and 60A surge currents. For the highest loads during 3-phase applications and DC loads.
- Contact mounting: 4NO, as power contacts 1NO / 1NC or 2NC signal contacts
- Switching current range 10 mA to 16 A
- Coil voltage 6 VDC to 220 VDC (non-standard coils available upon request)
- Coil loss power 1.3 W
- Design (LxWxH) 84.6 x 20 x 32 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: hydraulic controllers, construction machinery, lifting technology, off-shore applications, door control |
|
SIR 4 Power
The SIR4P contains extremely powerful, compact 4-pole power relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 12 A. 2 powerful contacts for loads with a high surge current (up to 60A) in the AC and DC range and 2 checkback contacts.
- Contact mounting 2NO / 2NC or 3NO / 1NC
- Switching current range 10 mA to 12 A
- Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
- Coil loss power 0.75 W
- Design (LxWxH) 46.4 x 16 x 30.7 mm
- Approvals: UL, cUL, SEV, TÜV
Areas of application: door controls, motion control, transportation, farm machinery |
|
7PA22 and 7PA23 are fast-acting lockout relay with eight changeover contacts and four changeover contacts, respectively.
Due to their quality, reliability and design, these relays are optimal for applications requiring high reliability and availability such as power stations, substations, railway and industrial plants. Typical examples include petrochemical industry, chemical industry, cement industry, rolling mills etc.
The relays comply with the IEC, EN, IEEE standards (type and routine test) and bear the CE mark.
The robust switch contacts are characterized by high make/break capacity, overload capability and continuous current intensity capacity; thus perfect insulation is obtained. Direct control of high-voltage and medium-voltage switchgear is possible. Their high degree of protection and the transparent cover ensure reliable operation in tropical and/or salty sea air ambient conditions. |
|
7PA27 is monostable fast-acting relay with four changeover contacts.
The design, durability and quality of these relays guarantee their application in high responsibility controls such as power stations, substations, railway, industries of continuous processes (petrochemical, rolling mills, cement and chemical industries), etc.
The relay has been tested in accordance with IEC,EN and IEEE standards. The relay is CE marked. The great power of the output contacts allows direct action on HV and MV switchgear, because of its making/breaking capacities, high permanent current and overvoltage capacity. |
|
| Curtis Industries relay sockets are engineered to produce a perfect result in every application. At Curtis Industries our commitment to excellence and our patented design technology assure consumers of Curtis relay sockets superior performance and reliability. Curtis Industry relay sockets utilize the follow features and many more. |
|
| ... products without technical information |
| |
... see all the products in the category
Relays
|
|
|
see the results for the following category