Rod ends are units that consist of a housing and a spherical plain bearing. They are available ...
Rod ends are units that consist of a housing and a spherical plain bearing. They are available with right hand male or female thread (for left-hand thread please contact WSW). For the standard ...
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.
Housing: Sizes ...
Rod ends consist of an eye-shaped head with integral shank forming a housing and a standard spherical plain bearing, or a spherical plain bearing inner ring, or a spherical plain bearing inner ring and a sliding layer between ...
The rod ends with external threads ...
Permissible working temperature: -60°C - +150°C ...
HIRSCHMANN Rod Ends and Spherical Bearings are bearing elements on a plain bearing basis. They are standardized according DIN 648 / ISO 6126 and CETOP. ...
Spherical plain beairngs have an inner ring with a sphered convex outside surface and an outer ring with ...
Product Description :
1. Bearings with a stretching rod, stretching rod with right or left hand, ...
Wide Slit Type has a ...
Features
- robust construction made of mild steel
- small azimuth angle error, perfect for in-line applications
- for tension and compression applications
- capacity ...
Features
- for tensile and compressive force measurement
- range from 100 kg to 1000 kg
- accuracy of 0.03 %fs
- mild steel construction with nickel plated surface treatment
- environment protection up to IP 67
Applications
- ...
Model 1380-01A
Rod End Load Cell, 500 lbf (2.2 kN) rated capacity, 50% static overload protection, 3/4-16 male & female thread, aluminum construction
Measurement Range: 500 lb (2224 N)
Size - Diameter: 1.50 in (38.1 mm)
Size - Height: 4.25 in (107.9 mm)
Electrical Connector: PT02E-10-6P
Model 1380-02A
Rod End Load Cell, 1,000 lbf (4.4 kN) rated ...
Mechanically balanced, radial flow impeller includes balance holes to minimize axial thrust.
Seal chamber accommodates a wide choice of sealing arrangements from packing to mechanical ...
Standards:
Misc:
Volute Casing Design has raised face flanges to ISO PN 10/16 or ANSI B16.1 specifications.
Precision Cast Closed ...
Construction
- Single-stage end-suction centrifugal pumps, with bearing bracket.
- Nominal duty points and main dimensions in accordance with EN 733.
- Back Pull-Out ...
The ES-A series aluminum end support housings provide ...
The ES-S series steel end support housings provide ...
Coil end welder
The automated welding of old and new strip during the coil change reduces standstill times. This enables savings of ...
This type is the most popular compact shaft supporter. ...
Sold in pairs for easy parallel installation ...
SA-KUB
Steel Plummer Block for Shafts ...
Technical specifications
Strip width max. 120 mm
Strip thickness 0.2 - 1,5 mm
Technical ...
Mechanical valve ...
Anvendelse:
- ISIFLO threaded pipe fittings are threated pipe fittings for use with threat paste or teflon tape sealant.
Dimensions:
- ...
AISI 316L Stainless steel
BSPP Threaded
Machined
Pressure ...
AISI 316L Stainless steel
BSPP ...
AISI 316L Stainless steel
BSPT ...
GMT ball joints are structural elements whose inner ball is firmly connected to the outer metal by means of a vulcanized elastomer ...
Yonsha's ball joint are particularly suitable for suction pad applications where a high degree of flexibility ...
Our ball sockets are used mainly in steering systems. As we work with high performance ...
