C 300 MULTIBLADE RIP SAW 30 HP
Technical data:
- Max. dia. of blades with 70 mm. hole 350 mm.
- Motorized lifting of the head
- Automatic lubrication ...
TS 150 SAW-SPINDLE MOULDER 1500 MM.
- Saw-spindle moulder with tilting blade
- TS 150 table sizes:
TS 150/1500 330x1500 mm.
TS 150/2000 330x2000 mm.
- TS 300 table sizes:
TS 300/2600 330x2600 mm.
TS 300/3200 330x3200 mm.
- Cross-cut capacity sliding table 1500 mm 1550 mm.
- Cross-cut capacity sliding table 2000 mm 2050 mm.
- Cross-cut capacity ...
GM 104 S GRINDING STONE-SETTING MACHINE
for band saw blades
Technical data:
- Min/max ...
1. Standardized parts can ensure a best efficient & easy maintenance.
2. All steel plates of machine body are cut by laser to achieve a very precise & rigid construction.
3. Feed chain is made with durable cast iron, ...
Complete range of hydraulic rip saws with retractable blade, for timber. Length capacity from 3 to 7 m and up to 1300 ...
Whether it's face frames, long runs or full production, the SLR12 Straight Line Rip Saw has every job covered. Powered by a 15HP main motor, this saw has the capacity for virtually any job. The 12" main blade mounts on a high alloy, heat treated arbor that is precision ground and dynamically balanced for maximum stability and long durability. The caterpillar ...
Pinheiro Multiple Rip Saws and Double Edger, AMA series assures, with the great robustness and stability, as well as its unique double V guided ...
Pinheiro Multiple Rip Saws and Double Edger, AMA series assures, with the great robustness and stability, as well as its unique double V guided ...
Pinheiro Multiple Rip Saws and Double Edger, AMA series assures, with the great robustness and stability, as well as its unique double V guided ...
CRATER-02 AP Automatic 18" Straight Upcut Saw with Auto Feeding (Servo System)
Standard Equipment
Ø 18" circular saw blade
Pneumatic spray mist lubrication system
Lubrication unit
Infeed table 2 m (6.5')
Air gun
User's manual
Optional Equipment
Additional infeed & outfeed table
Spare saw blade
Specific ...
CRATER-02 A Heavy Duty Automatic Upcut Miter Saw 16.5" (420 mm)
Standard Equipment
. ø420 mm (17") carbide tipped saw blade
. Pneumatic twin horizontal & vertical clamps
. Air gun
. User's manual
Optional ...
CRATER-06 A Heavy Duty Automatic Upcut Miter Saw 18" (460 mm)
Standard Equipment
. ø460 mm (18") carbide tipped saw blade
. Pneumatic twin horizontal & vertical clamps
. Air gun
. User's manual
Optional Equipment
. Infeed & outfeed table
...
Ø450 mm Automatic Feed & Cut Mitre Saw for efficient cutting of Aluminum, hard plastic and non ferrous materials
* Hydro-pneumatic saw blade feed with variable speed control ...
Model H350/H:
The Premium Mitering Circular Saw for Production Cuts of Steel and Stainless Steel Tubes, Profiles, Sections.
Saw ...
Automatic Upcut Mitre Saw for Pvc or Aluminium Profiles
SM-110
*For automatic cutting of pvc and aluminum profiles.
*Fixed angle adjustments at 0°, 15°, 22.5°, 30°, ...
For units: HSG-0, HSG-0-electronic,
HSG-1-VW, ...
Cutting blade to cut fine ...
Cutting blade of higher capacity, for separating ...
For cutting purposes CeramTec has developed a high-performance material zirconia - a special ...
Laser 900
Building materials
...
FINGER JOINT CUTTERS
AceCo finger joint cutters are the ultimate in quality and cutting precision. Our finger joint cutters are manufactured using American Iron and Steel Institute (AISI) ...
M2 HSS
* Finite Finish™
...
EVOLUTION 3
* High Performance Coating
* AISI Tool ...
For resharpening and toothing of HSS-, segmental-, CV- and solid tungsten carbide saws with the advantages of CBN-grinding
With 2 CNC-axes
External coolant facility ...
For resharpening and toothing of HSS-, segmental-, CV- and solid tungsten carbide saws with the advantages of CBN-grinding and automatic chamfering
With 4 CNC-axes
External ...
For resharpening and toothing of HSS-, segmental-, CV- and solid tungsten carbide saws with the advantages of CBN-grinding
With 2 CNC-axes or with 3 ...
SPECIAL FEATURES
Grinding both bevels at once, for burr free finishing
Grinding of single bevel
Easy angle adjustment
Lateral adjustment of the knife position for centering of the cutting edge
Manual centralized lubrication
Quick and easy to operate
...
High quality sharpening with CBN grinding wheel
High pressure coolant system with filtering system and mist extraction unit
Compensation for the grinding wheel thickness
Sharpening of variable tooth pitch
Easy and accurate set-up of ...
STANDARD FEATURES
Working area fully enclosed in a cabinet with interior lighting
High pressure coolant facility with filtering system and mist extraction unit
Electronic handwheel for manual positioning of grinding slide
Clamping of circular saws without tools
Quick adjustment for chamfering
Automatic centralized lubrication ...
1. Specialized for new saw blade tooth forming and sharpening. This machine is designed for easy operation and
to learn how to operate by no experienced operator.
2. This machine requires simple maintenance for long last performance.
3. All the adjustable controls ...
The new concept which provides two live images at the same time. Use of the series 6000 raster zoom systems and the corresponding angular optics allow us to show the saw tooth from the side and from the front (or by swivelling) ...
In the past sharpening wheels has been vey important to obtain the best performances on tools in the various mecchanical applications. During the ...
Increase Saw Blade Cleaning Efficiency
IMPROVED CLEANING
The Omega® Saw Pro is a cost effective 33 gallon tank offering portability and versatility for cleaning saw blades horizontally up ...
De-awner
Model Name : D-184
Capacity
10ton/hour
Size
1530(L) ...
Several 300/350mm blade are installed on a long arbor (620mm width) to create bevels and ...
