Industrial presses

Force: 30 tf
Opening: 2,500 mm
Rate (strokes/min): 1,200, 3,200 p/min

... NT Series Electro Servo CNC Punch Press 30 ton with advanced REXROTH AC Servo drive technology. and featured with high speed, high precision, energy saving, and low noise. the ES NT Series CNC turret punching machine ...

Force: 600 tf

... correct capacity of model is being choosed based on the material thickness, quality and plate diameter. The BMB-P models dishing press power is calculated for biggest diameter of dies to give best cycle time and productivity ...

Force: 150 tf - 1,600 tf

... correct capacity of model is being choosed based on the material thickness, quality and plate diameter. The BMB-P models dishing press power is calculated for biggest diameter of dies to give best cycle time and productivity ...

Force: 60, 100, 160, 200 tf

... bushings • 2-step hydraulic unit • Supply voltage 3x400 V / 50 Hz • Work cylinder with smooth horizontal adjustment • Press frame features high rigidity, functionality and excellent finish

Force: 200 tf
Stroke: 400 mm
Table width: 410 mm

... bushings • 2-step hydraulic unit • Supply voltage 3x400 V / 50 Hz • Work cylinder with smooth horizontal adjustment • Press frame features high rigidity, functionality and excellent finish

Force: 100, 150 tf

... • This press with its manually movable gantry is manufactured exclusively in Europe and made of high-grade quality steel • The large setup table makes it perfect for straightening large sheet metal plates and structures • ...

Force: 500, 200, 300 tf
Opening: 350, 400, 450 mm
Stroke: 150 mm

Frame structure: whole welded frame structure through annealing process, enhances high strength and rigidity; Ram cylinder structure: built-in auxiliary cylinder, fast dry run speed, enhances high productivity; Oil tank: located ...

Force: 35 tf - 600 tf
Opening: 600 mm - 1,050 mm
Stroke: 350, 600, 450, 560, 700 mm

... control the scrap rate of products caused by machine accuracy; Pressing accuracy: repeatability of ram pressure achieve to ±3%, control the scrap rate of products caused by machine accuracy; Machine ...

Force: 200 tf - 2,000 tf
Opening: 400, 450, 600, 860 mm
Stroke: 150, 200 mm

... 0.01mm, control the scrap rate of products caused by machine accuracy; Pressing accuracy: repeatability of ram pressure achieve to ±2%, control the scrap rate of products caused by machine accuracy; Machine ...

Force: 0 kN - 250 kN

Ideal for high-quality pellets The manually-operated hydraulic FRITSCH Pellet Press is ideal for fast and easy preparation of both: solid and highly permeable pellets of solid samples for X-ray fluorescence analysis ...

Force: 2,000 kN
Stroke: 23, 10 mm
Table width: 110 mm

... the best features of the two hand lever press types, the toggle press and the rack and pinion press, and combined them in the SCHMIDT® CamPress 11N. Thanks to this clever mechanism, ...

... 16092 came into effect on September 19. 2021 and SCHMIDT Technology will deliver only EC-type examination approved press workstations. Press workstations equipped with two-hand safety will be furnished ...

During the development of the compact guarding SCHMIDT® SmartGuard, the focus was on ergonomics and protection at the workstation. The transparent guarding completely encloses the working area during the pressing process, effectively ...

Force: 0.5 kN - 50 kN
Stroke: 80, 100, 200 mm
Working speed: 414, 280, 100 mm/s

... powerful data acquisition analysis and reporting capabilities. Multi-lingual LCD allows you to switch among 12 different languages. You can teach the press in one language and run it in another, including: ...

Force: 0.5 kN - 120 kN
Stroke: 80, 100, 200 mm
Working speed: 120 mm/s - 414 mm/s

Higher Speed, Greater Precision, Enhanced Interfacing Next Generation Servo Press Features Easy Installation - Ethernet port included as standard equipment - Choose from 6 different Field Network types - Low noise ...

Force: 0.5 kN - 120 kN
Opening: 66 mm - 220 mm

Unit Type Servo Press -Electrically-powered JP Series 5 runs cleaner and quieter than pneumatic and hydraulic presses, with lower power consumption. -Interactive, user-friendly programming, and multiple pressing ...

Force: 981 kN
Stroke: 380 mm
Max. pressure: 0 bar - 258 bar

... 100 ton hydraulic press is equipped with a movable cylinder (left-right) and an in-height adjustable working table. Furthermore, it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing. The ...

Force: 50 kN
Stroke: 250 mm
Table width: 450, 300 mm

... (∅ 50 mm). We produce this 50 ton C frame press with a selector for manual / semi-automatic / automatic work-mode, two speeds, a pressure switch and light guards in the frontal working area of the ...

Force: 100 tf
Stroke: 250 mm
Table width: 550, 400 mm

... (∅ 50 mm). We produce this 100 ton C frame press with a selector for manual / semi-automatic / automatic work-mode, two speeds, a pressure switch and light guards in the frontal working area of the ...

Force: 2,500 kN - 40,000 kN
Opening: 250 mm - 4,000 mm

The COMPOSITE series presses are available both in the column version and in the frame version with prismatic guides. In this last case the guides rails can be hydraulic in order to free the moving platen during the inlet of the mold. ...

Description Two floors press with 4 or more cylinders, short stroke and movement (single or double). This press has been specifically studied for the production of low profile and high quality composite ...

Force: 500 kN
Stroke: 400 mm
Table width: 500 mm

... Application sectors Aerospace Automotive Marine Railway Wind Housing Military Medical Appliances Industrial

Force: 300, 50 kN

Specifications: Stroke rate: continuously variable from 5 to max. 700 1/min. Press: nominal stamping capacity 300 kN, stroke 10 mm Slide units: max. nominal forming capacity 50 kN, max. stroke 10 mm Feed length: ...

Specifications: Stroke rate: max. 400 1/min Nominal force: 500 kN Stroke range: 15 – 63 mm Stroke position: infinitely adjustable from 0 to 60 mm Tool mounting plate (L×W): 1,000 × 560 mm Opening size in B.D.C.: 287 mm Column ...

Force: 800 kN

Specifications: Stroke rate: max. 200 1/min Nominal force: 800 kN Stroke range: fixed stroke with 30 mm Stroke position adjustment: - 8 mm from B.D.C. Tool mounting plate (LxW): 1000 mm x 510 mm Opening size in B.D.C.: ...

Force: 1,500 kN

Machine features: - Closing from the top. - Specific pressure 600 kg/cm². - Safety: light curtain, dual-hand control. Available in single or double-stage version.

Force: 5,000 kN

Machine features: - Closing from the top. - Specific pressure 2,600 kg/cm². - Lower ejection battery.

Force: 2,000 kN

Machine features: - Closing force: 2,000 kN. Available as double station, three station or multistation version. Hot-cold process for carbon or glass fibre applications.

Force: 60 kN
Max. pressure: 165 bar

... door inserted. The stop system can be moved in X and Y direction. The double-acting hydraulic cylinder is flanged to the machine body in a force and form-fit manner. Also included are the laser pointer for displaying ...

Force: 46 kN
Max. pressure: 600 bar

The AP 250 for punching without pre-drilling. When the tasks are getting bigger, the devices from our AP line show their full potential. For example, for quick and easy punching of round, square, rectangular or special shapes in control ...

Force: 46 kN
Max. pressure: 600 bar

... pre-drilling, no other device can hold a candle to our AP 400 – no matter if you need to work on control cabinet housings, switch cabinet doors or mounting plates. Openings in round, square or rectangular shapes are created ...

... products Nargesa are according to the European CE normative and regulations for the manufacturing of industrial machinery. Technical features The Hydraulic Press PI85 NARGESA, is a NOVELTY in the world ...

The ZCP 020 manual cutting press utilizes the bent-lever principle. Its bent lever length can reach up to 30% higher cutting force in the starting range. This kind of cutting press is user-friendly and ...

... that is used for the cutting blades. Moreover, the 7108 pneumatic cutting press machine has the capacity to provide a higher cutting force.

Force: 5 kN

... Series, manufactured by Zwick, is a series of manual cutting presses generally operated using an eccentric lever. This cutting press is devised for mounting up to 4 cutting dies in simultaneous manner. In addition, it ...

Force: 15 tf - 100 tf
Max. pressure: 700 bar

... air or electro hydraulic pumps. •Bench press : PRS15 with 1 speed hand pump •Workshop presses : 2 speeds hand pump or pedal control air hydraulic pump •Single acting cylinder, spring return (except 100T press ...

Force: 5 kN - 50 kN
Stroke: 0 mm - 200 mm
Working speed: 1 mm/s - 35 mm/s

... operator can choose between different working modes: stroke, load, measured distance from contact and pressing time. Each press has the capacity for 100 working programs. All AGME PE-50 electric presses have CE certification. ...

Force: 250 tf

H-Press 2500 is a rail track straightening/bending machine. It is designed with a double head of 250 tons bending force, hydraulic stop positioning, motorized rollers for rail track feed in both directions. The machine ...

Force: 100 tf
Weight: 2,550 kg
Overall length: 2,000 mm

... annoying frames for better machine and tool use , with frontal position for the operator - forged steel carriage with double slides, suitably hardened, grounded and protected by dust scrapers. The T.100 DIGIT 2 AXES ...

Force: 70 tf
Weight: 1,960 kg
Overall length: 1,720 mm

... annoying frames for better machine and tool use , with frontal position for the operator; - forged steel carriage with double slides, suitably hardened, grounded and protected by dust scrapers. The T70 DIGIT 2 AXES ...

Force: 36, 3, 15, 100 kN
Opening: 125, 75, 175, 200 mm

... holder. A concept that has been well proven: More than 600 IEF servo presses work reliably around the world - in rough industrial environments.

Opening: 800 mm

... with spring recall and tensile approximation screw Solid structure in a monobloc format to ensure a greater rigidity of the machine as a whole, except for model MD that is manufactured with a “U” tie beam. Floating bedplate ...

Force: 50 tf
Opening: 800, 136, 200, 1,000, 163 mm
Working speed: 420 mm/min

Opening: 1,000 mm

Motorized hydraulic presses. Activation by means of sensitive manual distributor with 3 positions. Double effect cylinders. Extreme of the piston rod of the cylinder mechanized for the adjustement of tools with renovable head. Rigid ...

Force: 0 kN - 10,000 kN

Thermoplastic stamp forming press systems Pinette P.E.I. is well-known as a composites press manufacturer that has gathered a deep expertise in the production and implementation of thermoplastic stamp ...

Force: 200 kN - 2,000 kN

... cooling down to room temperature under pressure. PRESS SYSTEM FOR THERMOPLASTIC COMPOSITES CONSOLIDATION Pinette P.E.I. equipment is the perfect fit for your consolidation process. Our compression press ...

Force: 1,000 kN

RTM, HP RTM & C-RTM automated press systems RTM & HP RTM are manufacturing processes used to produce composites structural parts with very high mechanical properties. Thanks to its expertise as a composites molding ...

Applicable to light, thin material, for single, and progressive die application in blanking, piercing, bending, forming, interlink with ROT line or transfer unit. Features The symmetrical front-rear column structure design minimizes ...

Applicable to large type of heavy tonnage die tooling with multiple precision stages in blanking, piercing, bending, forming for single or progressive application. ● Features Hydraulic overload protection system Extra long 8-points ...

... noise wet clutch and brake. Rigid frame with less deflection. High accuracy transmission gears and high rigidity crank ensure press long life and accuracy. Forced Lubrication system with default monitor ensures the operation ...

Hydraulic pump power: 1.5 kW
Weight: 170 kg
Overall length: 1,200 mm

Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and intuitive.

Force: 20 tf
Stroke: 100 mm
Hydraulic pump power: 2.5 kW

Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and intuitive.

Force: 30 tf
Stroke: 180 mm
Weight: 400 kg

Horizontal hydraulic press, strong and compact, with through-rod piston for adjusting the mechanical stop, no micro limit switch. Machines with manual lever control and spring return. User-friendly and intuitive.