Production presses

Force: 500, 200, 300 tf
Opening: 350, 400, 450 mm
Stroke: 150 mm

Frame structure: whole welded frame structure through annealing process, enhances high strength and rigidity; Ram cylinder structure: built-in auxiliary cylinder, fast dry run speed, enhances high productivity; Oil tank: located ...

Force: 300 tf
Opening: 1,000 mm
Stroke: 450 mm

Frame structure: welded frame structure made of high quality steel plate and annealing process, confirm the elastic deformation in maximum pressure through finite element analysis, guiding of moving bolster by eight-face linear guide ...

... 16092 came into effect on September 19. 2021 and SCHMIDT Technology will deliver only EC-type examination approved press workstations. Press workstations equipped with two-hand safety will be furnished ...

Force: 100 tf
Opening: 650 mm
Stroke: 450 mm

... automated production lines. We design this hydraulic C-frame press with an upper- and lower table with T-grooves. The upper table ensures a perfect alignment by means of four cylindrical lateral guides ...

Force: 150 kN
Stroke: 250 mm
Table width: 550, 500 mm

Our 150 ton production press is suitable for stamping, die-cutting, deep-drawing and forming. This hydraulic press can be incorporated in automated production lines as ...

Force: 80 kN
Stroke: 450 mm
Table width: 400, 550 mm

This 80 ton hydraulic C-frame press is designed to carry out tasks involving deep-drawing, stamping and forming in medium and high volumes. Also suitable to incorporate in automated production lines. Designed ...

Description Two floors press with 4 or more cylinders, short stroke and movement (single or double). This press has been specifically studied for the production of low profile and high ...

Force: 0.5 kN - 50 kN
Stroke: 80, 100, 200 mm
Working speed: 414, 280, 100 mm/s

Comprehensive Stand Alone Servo Press Designed especially for cell production and research facilities, the result display, control mechanism, pressing mechanism, C-frame and pair of operation switches ...

Force: 0.5 kN - 120 kN
Opening: 66 mm - 220 mm

Unit Type Servo Press -Electrically-powered JP Series 5 runs cleaner and quieter than pneumatic and hydraulic presses, with lower power consumption. -Interactive, user-friendly programming, and multiple pressing ...

Opening: 500 mm

Hydraulic press MECAMAQ “C-Frame PCC series” useful for industrial applications who requires center-loads useful for broad range of operations such as, forming, punching, bending or other industrial applications. Hydraulic ...

Opening: 500 mm

Hydraulic press MECAMAQ “C-Frame PCC series” useful for industrial applications who requires center-loads useful for broad range of operations such as, forming, punching, bending or other industrial applications. Hydraulic ...

Opening: 500 mm

Hydraulic press MECAMAQ “C-Frame PCC series” useful for industrial applications who requires center-loads useful for broad range of operations such as, forming, punching, bending or other industrial applications. Hydraulic ...

Force: 200 kN - 2,000 kN

Hydraulic press systems for thermoplastic composites consolidation: high volume production Pinette P.E.I. is a leading manufacturer of hydraulic presses and is involved in each step of thermoplastics ...

... with compression molding press dedicated to tire production. RUBBER MOLDING PRESS SYSTEM FOR TIRE PRODUCTION As an engineering company specialist of industrial project ...

Force: 0 kN - 40,000 kN

... compartments. The production mean can be semi or fully automatic, which reduce dramatically the need for numerous operators. THERMOFORMING PRESS LINES Our thermoforming production ...

Force: 5 kN
Stroke: 40 mm
Table width: 60 mm

... white, red Advantages: - Height adjustment of press head by threaded spindle - High output power with moderate input force - Accuracy thanks to precise ram guidance - Accurately machined press ...

Force: 5 kN
Stroke: 40 mm
Table width: 60 mm

... white, red Advantages: - - Height adjustment of press head by threaded spindle - - High output power with moderate input force - - Accuracy thanks to precise ram guidance - - Accurately machined press ...

Force: 5 kN
Stroke: 40 mm
Table width: 60 mm

... white, red Advantages: - - Height adjustment of press head by threaded spindle - - High output power with moderate input force - - Accuracy thanks to precise ram guidance - - Accurately machined press ...

Force: 1,000, 2,000, 3,000 kN

Kurtz KPS SKT Trimming Presses with sliding-tilting table function - Sliding function via hydraulic cylinder - Hydraulic swivel drive tilts up to 180° - Tilt angle freely programmable - Speed profile free programmable - Recipe ...

Force: 500, 1,000, 2,000, 3,000 kN

KPS - Column Version - Ideal solution for tall parts and parts with large volume - Loading and removal possibilities from four sides - Robust, strongly dimensioned guiding columns - All possibilites of flash removal by variable ...

Force: 32, 52, 67, 100 tf

Trimming Presses in C-Frame Design Free access from all sides Simple robot handling Full use of the whole table and clamping platen area The size of the trimming tool is not limited by the table and clamping platen area Ideal ...

Force: 360 kgf
Opening: 20 mm - 250 mm
Stroke: 0 mm - 50 mm

... restored is high. Single or continuous stroke, the range of EMG pneumatic presses is integrated into the workstations or production line, ensuring ergonomy, operator safetyand process reliability. These presses ...

Force: 700 kgf
Opening: 40 mm - 260 mm
Stroke: 0 mm - 100 mm

... restored is high. Single or continuous stroke, the range of EMG pneumatic presses is integrated into the workstations or production line, ensuring ergonomy, operator safetyand process reliability. These presses ...

Force: 1,000 kgf
Opening: 140 mm - 200 mm
Stroke: 0 mm - 100 mm

... restored is high. Single or continuous stroke, the range of EMG pneumatic presses is integrated into the workstations or production line, ensuring ergonomy, operator safetyand process reliability. These presses ...

Force: 300 kN - 10,000 kN
Opening: 800 mm

We Produce Special Order Workshop Presses Together with you Our Products are According to Customer Oriented Please Don't Be Hesitate to Contact us to Share Your Needs #HidrokarPres Export Manager / Gökhan Erim info@hidrokar.com Whatsapp ...

Force: 1,000 kN
Opening: 1,000 mm

WORKSHOP PRESS Workshop Presses These machines exist in all workshops in indurstry.They are used for pressing,bending,punching,extravting,straightening.Workshop presses are the main machines for these actions.Our manufacturing ...

Force: 100 tf
Opening: 1,250 mm
Stroke: 300 mm - 350 mm

Platine body H frame presses with table. They are used for pressing,bending,punching,extravting,straightening.Workshop presses are the main machines for these actions.Our manufacturing is customer oriented and we can manucafture in all ...

Force: 0 kN - 60 kN
Table width: 230 mm
Table length: 230 mm

... ROTARY BL was designed for the production of double-layer and mono layer tablets. It is ideal for product research and development, process improvement and clinical or small quantity production operations. • ...

Force: 2,500 tf

... this Kenya customer purchase primapress press brake and shearing machine and some power press machine , and using very good. So they buy this big hydraulic door embossing machine door skin press ...

Force: 2,400 tf - 3,600 tf
Stroke: 400 mm
Working speed: 5 mm/s - 10 mm/s

Eight Column door embossed pattern embossing hydraulic press machine for door making

Force: 315 tf - 630 tf

Hydraulic Press For Animal Cattle and Sheep Brick Salt Lick Block forming hydraulic press machine Product Application This hydraulic press is suitable for pressing and forming animal ...

Force: 12 tf

Pressfitting. Muffler pressfitting one or two stations. Description and Technical data Models: DP 800, DP 1200 • One station unit • Work power 12 Ton • Distance range table/mace from 700 mm min. to 2000 mm max. • Working stroke ...

Ridge-Locking (mechanical blocking). Simultaneous ridge-locking horizontal mode one station or two stations. Description and Technical data Models: DCR 70, DCR 70/2 • Simultaneous ridge-locking horizontal mode one station or two ...

Force: 880 kN
Opening: 196 mm
Max. pressure: 250 bar

... a determined type of parts, with fast die changeover and the robustness of the Neotecman models. PUNCHES - 1 vertical PRODUCTION (empty) - From 500 to 6.000 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to ...

Force: 980 kN
Opening: 200 mm
Max. pressure: 250 bar

PRESS PUNCHES - 3 horizontal PRODUCTION (empty) - From 500 to 3.600 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to 1,26 in) BAR LENGTH - To 4.000 mm (To 2.65 lb) DIE DIMENSONS 205 x 205 mm This ...

Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar

... for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, simetric billets, diferent orientations or multiple billets at the same time. PUNCHES ...

Force: 198.9 tf
Opening: 10 mm - 500 mm
Table width: 650 mm

... with integrated water cooling circuit Water / Air chiller Oil-free cooling DESCRIPTION • Typically used for production where compacity and short cycle time is needed • Monoblock upper steel bolster construction • ...

Force: 244.7 tf
Opening: 10 mm - 500 mm
Table width: 1,000 mm

... READY Master™ ready Automatic Closing of outlet valve Actuated tool trolley DESCRIPTION • Typically used for production in highly automated workshops • Welded upper steel bolster construction • The clamping ...

Force: 642.5 tf
Opening: 25 mm - 600 mm
Table width: 1,300 mm

... floor nor foundation are needed. DESCRIPTION • Illustrating the modularity of our press concept, the 630 Tons press is an assembly of a 270 Tons press module and a 360 Tons ...

Force: 294.2 kN
Opening: 150 mm

... ° C •*** Maximum press area diameter: 250 mm •*** Stroke distance: 150 mm •*** Adjustable pressing force of 0-30 tons, •± 30 kg force accuracy, •Temperature accuracy ± 2 ° C, •Ability to read continuously applied ...

Force: 49 kN - 490.3 kN

... range of manual presses and accessories to suit your specific applications. The manually operated oil-hydraulic laboratory press makes pressing pellets of various materials faster with a high reproducibility. Features Hardened ...

Force: 7.5 kN
Opening: 40 mm

... accurate setting of press heads. The L-VK 750-40 Systems can be equipped with a wide range of optional components. This includes Precigonram adjustment functions (DP), return travel locks (HS) for guaranteeing high-quality ...

Opening: 40 mm

... is a toggle press manufactured by KMT. The optimum transmission ratios of the toggle press generates high forces at the end of the stroke. This unit guarantees low air consumption, making the unit an ...

Force: 2.5 kN
Opening: 50, 100 mm

A manual press from KMT Productions that has a square rani, which is actually beneficial when compared to the ones with round ram. Hence, it delivers absolute torsion resistance and free movement of ...

Force: 100 kN
Opening: 50 mm - 1,000 mm
Stroke: 1 mm - 20 mm

Force: 102 kN - 1,010 kN
Opening: 50 mm - 1,000 mm
Stroke: 200, 350, 500 mm

Force: 6 kN - 200 kN
Opening: 50 mm - 1,000 mm
Stroke: 200, 300 mm

Force: 10,000 kN

ODEN-Flexible, a hydraulic press available in many different configurations allowing for a wide range of manual or automatic production solutions. It is a four column press designed in ...

Force: 1.5 kN
Opening: 85 mm - 180 mm

Unique GECHTER quality No-play adjustable V block guide. The clamping device can be removed towards the front, and thus the clamping pivot is not damaged. * applies only to 4HZPP T-Slot 1 x DIN 650 M8x10 Accessories - GECHTER Manual ...

HMS, manual toggle press with press force monitoring (force-only or force-displacement). The manually operated toggle presses with press force monitoring HMS are in accordance with the ...

Force: 4,000 kN
Opening: 23 mm - 250 mm

... application flexibility above all in the use of progressive dies. The development of this kind of press has also been generated by the use of drives, production islands and other technical expedients ...

... Infeed of top layer slats into hoppers (right side) A typical production line contains either 2 small version presses or 1 large version. The main differences between the 2 versions of the press are ...

Force: 110 tf - 250 tf
Stroke: 110 mm - 280 mm
Hydraulic pump power: 11 kW - 30 kW

... overload protection device, to guarantee the precision and safety of press slider revolving and stopping. ▶ Reasonable physical design is convenient to realize automatic production, reduce cost and ...