Compression presses

Force: 0 kN - 250 kN

Ideal for high-quality pellets The manually-operated hydraulic FRITSCH Pellet Press is ideal for fast and easy preparation of both: solid and highly permeable pellets of solid samples for X-ray fluorescence analysis ...

Force: 30 tf
Opening: 2,500 mm
Rate (strokes/min): 1,200, 3,200 p/min

... NT Series Electro Servo CNC Punch Press 30 ton with advanced REXROTH AC Servo drive technology. and featured with high speed, high precision, energy saving, and low noise. the ES NT Series CNC turret punching machine ...

Opening: 1,700 mm

The PHA 80 E is a hydraulic production press which works with a power of 80 tm. The tables, which are found between columns, measure 1,400x1,400 mm while the top table has a size of 500 mm. An opening of 1,700 mm is also ...

Opening: 1,100 mm

MECAMAQ press type PDV-700 of 700 Tm, it has a capacity of table 1.000 x 1.000 mm whit a course of the cylinder of 300 mm and a maximum opening of 1.100 mm. The hydraulic group is of a speed with engine 7,5 Hp. It incorporates ...

Opening: 700 mm

The PDV150 is manufactured by Mecamaq, and is a hydraulic column press that can deliver an utmost thrust force of up to 150 Tm and has a rated stroke of 450 mm at the upper plate. Both the upper plate and the lower plate ...

Force: 200 kN - 2,000 kN

... cooling down to room temperature under pressure. PRESS SYSTEM FOR THERMOPLASTIC COMPOSITES CONSOLIDATION Pinette P.E.I. equipment is the perfect fit for your consolidation process. Our compression ...

Force: 0 kN - 25,000 kN

Compression molding press for rubber & composites curing Pinette P.E.I. as a global supplier of large scale hydraulic press systems and production lines, offer its customers a complete ...

... industry with compression molding press dedicated to tire production. RUBBER MOLDING PRESS SYSTEM FOR TIRE PRODUCTION As an engineering company specialist of industrial project management, ...

Force: 120 kN - 1,000 kN
Rate (strokes/min): 1,000 p/min

... eccentric forces and 16-fold linear roller bearing guide preloaded free of play. Encapsulated grease lubrication makes the punch press almost maintenance-free State-of-the-art CNC programming through graphic visualization ...

Force: 120 kN - 150 kN
Rate (strokes/min): 600 p/min

... Ram slide with backlash-free preloaded 8-fold linear roller bearing guide Stepless slide adjustment Automatic high-speed press, optionally equipped with mechanical gripper feed or CNC roller feed unit with servo drive Fixed ...

Force: 250 kN - 630 kN
Rate (strokes/min): 600 p/min

Compressive forces from 250 to 500kN Stroke rates max. 600 min-1 Four-column design with pretensioned tie rods prevents the springing known from C-frames Shaft completely mounted on roller bearings: the dreaded "jamming" of the ...

Force: 0.5 kN - 50 kN
Stroke: 80, 100, 200 mm
Working speed: 414, 280, 100 mm/s

Comprehensive Stand Alone Servo Press Designed especially for cell production and research facilities, the result display, control mechanism, pressing mechanism, C-frame and pair of operation switches are all included ...

Force: 0.5 kN - 120 kN
Opening: 66 mm - 220 mm

Unit Type Servo Press -Electrically-powered JP Series 5 runs cleaner and quieter than pneumatic and hydraulic presses, with lower power consumption. -Interactive, user-friendly programming, and multiple pressing ...

Force: 5 kN - 200 kN
Opening: 65 mm - 260 mm

"Inline Specialist" Servo Press The JP-S2 Series servo press from Janome efficiently press fits, swages, rivets, seals, cuts, punches, bends, crimps and more. Available in nine sizes ...

Force: 2,500 kN - 40,000 kN
Opening: 250 mm - 4,000 mm

The COMPOSITE series presses are available both in the column version and in the frame version with prismatic guides. In this last case the guides rails can be hydraulic in order to free the moving platen during the inlet of the mold. ...

Description Two floors press with 4 or more cylinders, short stroke and movement (single or double). This press has been specifically studied for the production of low profile and high quality composite ...

Force: 1,500 kN - 10,000 kN
Stroke: 400 mm - 1,200 mm
Table width: 400 mm

Description The ERMIONE R presses have been studied for the compression molding of rubber items such as gaskets – gaskets heat exchangers – rubber plates. They are presses with a monolithic frame structure with downward ...

PR Series are built according to customer needs and specific operating requirements. • Equipped with safety guards and systems, fixed or mobile bench, push piston and positioning function on request. • They can also be equipped ...

Force: 1.5 kN
Stroke: 40 mm
Table width: 65 mm

... Rack-and-pinion presses allow simple and easy conversion for lefthanders without losing the tool setting. Ideal for job sharing on one press. The round ram of mäder pressen is characterized by high sturdiness, ground ...

Force: 20 kN
Stroke: 40 mm
Table width: 190 mm

... special nature of the workpiece, it is not initially possible to use both hand for two-handed operations and yet a large compression force is required at the end of the working stroke. With manually assisted pneumatic ...

Force: 20 kN
Stroke: 40 mm
Table width: 220 mm

... special nature of the workpiece, it is not initially possible to use both hand for two-handed operations and yet a large compression force is required at the end of the working stroke. With manually assisted pneumatic ...

Force: 20,000 kN

Machine features: - Specific pressure 500 kg/cm². - Specific heater plates: 1,500 x 1,500 mm. - Minimum mold closing speed: 0.03 mm/sec.

Force: 1,500 kN

Machine features: - Closing from the top. - Specific pressure 600 kg/cm². - Safety: light curtain, dual-hand control. Available in single or double-stage version.

Force: 5,000 kN

Machine features: - Closing from the top. - Specific pressure 2,600 kg/cm². - Lower ejection battery.

Force: 270 kN

... kN the HSM FP 3000 is excellently suited for pressing light metal and rolled hoop barrels. Low height and small footprint Press ram with spikes for opening the barrels and collector tray for residual liquid Enclosed ...

Force: 6,910 kgf - 7,820 kgf
Opening: 400 mm
Stroke: 6 mm - 400 mm

Power from 6910 kg to 30650 kg Stroke from 50 to 400 mm EMG hydro-pneumatic presses proceed with compressed air type only. These presses combines the advantages of both pneumatic and hydraulic systems, without any adverse effects (no ...

Force: 13,380 kgf - 14,000 kgf
Opening: 430 mm
Stroke: 6 mm - 300 mm

Power from 6910 kg to 30650 kg Stroke from 50 to 400 mm EMG hydro-pneumatic presses proceed with compressed air type only. These presses combines the advantages of both pneumatic and hydraulic systems, without any adverse effects (no ...

Force: 28,300 kgf - 30,650 kgf
Opening: 500 mm
Stroke: 6 mm - 400 mm

Power from 6910 kg to 30650 kg Stroke from 50 to 400 mm EMG hydro-pneumatic presses proceed with compressed air type only. These presses combines the advantages of both pneumatic and hydraulic systems, without any adverse effects (no ...

Stroke: 500 mm

PRESS FOR R.T.M. PROCESSING This RTM compression press trucks parts allows the production with 3 different molds separately. Operations: The produced parts are dedicated to equip ...

Force: 8,000 kN
Stroke: 800 mm
Working speed: 5 mm/s

S.M.C. COMPRESSION PRESS COMPOSITE BOARDING Big SMC composite parts requires presses platens which have to be wide and long. Press’ frame must be strong enough to avoid any deflection ...

Force: 7 tf - 70 tf
Stroke: 400 mm

LABORATORY PRESS DEVELOPMENT & PRODUCTION COMPRESSION PRESS Characteristics Force : 7 to 70 tons Pressure on material : max. 16 bars Daylight : 500 mm Stoke : 400 mm Closing ...

Force: 642.5 tf
Opening: 25 mm - 600 mm
Table width: 1,300 mm

... floor nor foundation are needed. DESCRIPTION • Illustrating the modularity of our press concept, the 630 Tons press is an assembly of a 270 Tons press module and a 360 Tons ...

Force: 112.2 tf
Opening: 10 mm - 500 mm
Table width: 650 mm

(SQ)RTM WORKSTATION ELECTRICAL HEATING 28KW Oil-free heating system Up to 200°C 2 x 14kW heating zones controlled by PID Typical : 3°C/min for 150mm aluminum tool UNIFORM PNEUMATIC-PRESSURE 1000x650 mm² 110 Tons available ...

Cold isostatic pressing applies pressure in a liquid from every direction to achieve greater uniformity of compaction (high-quality parts) for intricate shapes as compared to uniaxial pressing. MSE Technology’s Cold Isostatic Presses ...

Force: 49 kN - 490.3 kN

... range of manual presses and accessories to suit your specific applications. The manually operated oil-hydraulic laboratory press makes pressing pellets of various materials faster with a high reproducibility. Features Hardened ...

Opening: 40 mm

Pneumatic toggle press is built with a factory preset pressure point. It is designed with a right-angled gearbox for the height adjustment of the press head. A side-mounted measuring strip for the quick ...

Force: 2.5 kN
Opening: 50, 100 mm

... levers enables them to attain optimum accuracy during the pressing process. The enhanced transmission ratio allows a higher compression for to be attained.

Force: 100 kN
Opening: 50 mm - 1,000 mm
Stroke: 1 mm - 20 mm

Force: 102 kN - 1,010 kN
Opening: 50 mm - 1,000 mm
Stroke: 200, 350, 500 mm

Force: 6 kN - 200 kN
Opening: 50 mm - 1,000 mm
Stroke: 200, 300 mm

Force: 3 kN
Stroke: 100 mm
Weight: 18 kg

Servopress 3kN Compact Line Holding time with nominal force 4s Maximum speed 200mm/s Low speed 0.01mm/s Acceleration 5000mm/s2 Maximum load of tool 3kg Body 55x66mm extruded aluminum Driving Ball screw or Roller screw Rollvis ...

Force: 20 kN
Stroke: 400 mm
Weight: 42 kg

Servopress 20kN Compact Line Holding time with nominal force 4s Maximum Maximum Speed 150mm/s Low Speed 0.01mm/s Acceleration 2000mm/s2 Maximum load of tools 12kg Body 105x105mm extruded aluminum Driving Roller screw Rollvis Guide ...

Force: 7.5, 3.5 kN
Stroke: 152 mm
Weight: 29 kg

Servopress 7.5kN Tolomatic Stroke 152mm Holding time with nominal force 4s Maximum speed 290mm/s Low Speed 0.01mm/s Acceleration 5000mm/s2 Maximum load of tools 30kg Body 83.5x83.5 Driving Roller screw Tolomatic Guide Linear ...

Force: 169.3 kN - 249.1 kN

... largely dimensioned power: 5.5 KW /7, 5kW. Their guidance system with slides on more than 400 mm in height. Their punches of drilling of the lids with machined vents. The quality of their hydraulic components.

Force: 179.3, 288.9 kN

This hardware is designed for the «rinsing» of the metal drums then their crushing before their evacuation towards recycling «scrap iron» Adapted perfectly to its function, it carries out the two required objectives: 1: reduction of ...