{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Opening: 1,200 mm
This Mecamaq press for injection has a a power supply of 8 tm. It is equipped with a low table that has a diameter of 800 x 700 mm and a superior measurement of 650 x 400 mm. This also has a plate ejector that is 700 ...
Opening: 3,400 mm
The Double-action hydraulic press contains a power supply of up to 300 tm. This press can be activated by means of using four double effect cylinders. It contains a lower removable plate that has a dimension ...
Opening: 900 mm
Force: 784.5 kN
... approach speed and slow working speed). The 4 column press also contains a pressure switch and manometer. The cylinder stroke is easy to adjust with the end-stroke switches on the side of the hydraulic press. Our ...
Opening: 900 mm
Force: 980.7 kN
... approach speed and slow working speed). The 4 column press also contains a pressure switch and manometer. The cylinder stroke is easy to adjust with the end-stroke switches on the side of the hydraulic press. Our ...
Opening: 400 mm - 1,200 mm
Force: 1,500 kN - 10,000 kN
Presses designed for compression molding of rubber items such as gaskets - heat exchanger gasket - sheets. DESIGN • frame PLATE MOVEMENT • downward CLAMPING FORCE • from 1.500 to 10.000 kN / from 165 to 1102 ...
Opening: 400 mm - 1,200 mm
Force: 1,000 kN - 10,000 kN
... TITANIUM series machines are presses with column or frame structure. In the column version they are designed for the compression molding of technical rubber articles, and can be equipped also with an integral vacuum bell. In ...
Opening: 300 mm - 700 mm
Force: 1,500, 2,000, 5,000, 3,000, 4,000 kN
... presses designed for rubber items moulding, also with vacuum bell, as well as thermosetting resin items. In this case the press can be equipped with automatic systems for part loading/unloading. These presses can be ...
Opening: 150 mm
Force: 294.2 kN
... ° C •*** Maximum press area diameter: 250 mm •*** Stroke distance: 150 mm •*** Adjustable pressing force of 0-30 tons, •± 30 kg force accuracy, •Temperature accuracy ± 2 ° C, •Ability to read continuously applied ...
Opening: 0 mm - 1,000 mm
Force: 10 kN - 2,941.8 kN
Our polymer hot press consists of a hydraulic press with automatically operated and two heated platens. The temperatures of heated platens are controlled by PLC. Water cooling jackets are installed at ...
Opening: 1,100 mm
Force: 9,806.7 kN
Product characteristics： Frame structure: welded frame structure made of high quality steel plate and annealing process, confirm the elastic deformation in maximum pressure through finite element analysis, guiding of moving bolster ...
Opening: 2,000, 300, 100 mm
Force: 10,000, 3,000, 500 kN
PRESS SUITABLE FOR WORKING OF HOT FORGING IN BRASS PARTS AND COLD STAMPING OF METAL PARTS. - PRESS AT "SHOULDERS CLOSED" WITH PRISMATIC GUIDES - POWER 1000TON - USEFUL WORKING PLAN 1500x1500MM - ...
Opening: 2,500, 2,000 mm
Press at "4 Column" to "Automotive" sector. This particular customer has purchased a press from 1000ton light 2500x2000x2500mm 1600mm stroke. vel. 300/10 / 300mm / sec. Full press n ...
Opening: 1,600 mm
Force: 1,000 kN
Press for "AUTOMOTIVE" power 100Ton. This press was built in collaboration with a well-known Italian printer who cooperates with a large company in the "AUTOMOTIVE" sector for car interiors. It has ...
Opening: 110 mm - 1,100 mm
Force: 686.5 kN
... main components for mechanical processing are manufactured by imported machining center, to ensure machining precision of press elements. The shift-out rail of lower mold plate adopts wear resistant rail with intensified ...
Opening: 340 mm - 2,440 mm
Force: 0 kN - 3,800 kN
... main components for mechanical processing are manufactured by imported machining center, to ensure machining precision of press elements. The shift-out rail of lower mold plate adopts wear resistant rail with intensified ...
Opening: 0 mm - 152 mm
Force: 7.5, 3.5 kN
Compact servopress with Tolomatic actuator. 3.5kN holding force pushing force of 7.5kN for 4s. This servo is controlled by the dedicated software MecaMotion. The solution offers the possibility of data transfer with OPC UA industry standard ...
Opening: 200 mm - 1,000 mm
Force: 50 kN - 3,000 kN
... 30-40 mbar), floating upper platen for lower press range (1-10 kN), higher temperatures up to 700°C, cassette cooling system,… •2 column press frame: extraordinarily high parallelism and easy access ...
... quality dedicated tools, for flat packs and quad packs needing precision standoff control. These tools can operate in almost any press, hand or air. They have a manual adjustable and lockable micrometer that allows you ...
Force: 12,500 kN - 36,000 kN
... solutions for series production of fiber-reinforced components – with fully-automated hydraulic press systems and production expertise from Schuler. Our hydraulic press systems are suitable for series ...
Force: 1,600 kN - 10,000 kN
... the uprights. They can have monolithic or modular structure, from 1600KN to 10.000KN. These presses are suitable for molding and blanking operations even with decentralized loads. Depending on the characteristics ...
Opening: 750 mm
Application: press for molding pieces to aeronautic industry. - Press with removable lower plate, reference PDM-600. - 600 Tm capacity with 6 double effect cylinders. - ...
Servo Electric Press SEP 3T Servo Electric Press Up to 3 tons force [27 kN] Self-contained, portable unit Focused at the application of over-molded compliant pin housings
Opening: 2,000 mm
Force: 16,000 kN
Technical Data: Pressing area 2000 x 2000 mm Pressing Force 16 000 kN Opening 2000 mm Max. temperature 300 °C Cooling Yes Mode of operation Downstroke Characteristics: Servo hdraulic system ...
DESCRIPTION Controls Automatic Lectern electrical board with DOUBLE PUSHBUTTONS Microns for up/downstroke stop Commutator manual/Automatic function Automatic cylinder return PLC Siemens Electrovalves REXROTH Optional Blank holder from ...
SICMI SRL
Opening: 6 in - 22 in
... system and high technology options are based on standard production press models adapted to precision laboratory requirements. Recommended for testing or research, compacting, molding rubber or plastic, ...
Carver Inc.
Force: 115 tf
Custom Features: (4) 4” diameter chrome housing posts with oversized poured/cast ram guide bushings for superior ram guidance and rigidity 60” x 110” platens serve as mounting surfaces for the upper and lower heat platens (5) suspended ...
Beckwood Press
Force: 10,000 kN - 80,000 kN
RPH-S Hydraulic forging press 10MN - 80MN Cast iron construction in column construction - optimal accessibility for automation Due to our many years of experience in modernizing and overhauling presses from various ...
Presstec Pressentechnologie GmbH
Opening: 0 mm
Force: 0 kN
... out-of-spec parts are produced, eliminating scrap. Press methods include pressing to a force, distance, rate increase and decrease, relative distance and more. Programming every aspect of the press’ ...
We propose presses for RTM, Prepreg or Thermoplastic applications. Different possibilities of press opening, closing and movements of the upper and lower frame are proposed. The most requested configuration is the 180° ...
Opening: 280 mm - 550 mm
... mold to press for molding process, it is not only upgrade the processing efficiency, but also upgrade the hygiene and quality when we make Soybean relative products. Features Single operator ...
Yung Soon Lih Food Machine, Co., Ltd.
Please specify:
Help us improve:
remaining