Industrial presses

Opening: 155 mm
Force: 490 N

... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column.

Opening: 450 mm
Force: 1,470.9 N

... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column.

Opening: 580 mm
Force: 3.9 kN

... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column.

... information The SC 03 is an electropneumatic crimp press. It is equipped with a very efficient pedal switch. The correct and fully controlled sequence is monitored by a microprocessor control. The machine ...

BEHAbelt HP01 AIR Hotpress PERFECT SWITCHING AND OVERFLOW WELDING! HP01 AIR is the air-cooled version of the hot press and offers mobility thanks to its compact design. Features at a glance Very easy to ...

BEHAbelt HP01 WATER Hotpress PERFECT SWITCHING AND OVERFLOW WELDING! HP01 WATER is the water cooled version of the hot press and offers higher cooling capacity. Features at a glance Very easy to use. Reduces ...

Force: 12 tf

Pressfitting. Muffler pressfitting one or two stations. Description and Technical data Models: DP 800, DP 1200 • One station unit • Work power 12 Ton • Distance range table/mace from 700 mm min. to 2000 mm max. • Working stroke ...

Ridge-Locking (mechanical blocking). Simultaneous ridge-locking horizontal mode one station or two stations. Description and Technical data Models: DCR 70, DCR 70/2 • Simultaneous ridge-locking horizontal mode one station or two ...

Ridge-Locking (mechanical blocking). Machine with simultaneous ridge-locking vertical mode two stations. Description and Technical data Model: DCRV 70/2 • Tube range from ø16 mm to ø70 mm • Stainless tube thickness 2 mm

... Duo 2612 is the smartest duo oven and membrane press in its class. The oven and the vacuum press are mounted on the same chassis to optimize the space in your workshop and optimize its use. The ...

... is the duo Oven and membrane press for thermoforming whole solid surface sheets. The oven and the vacuum press are mounted on the same chassis to optimize the space in your workshop and optimize its ...

The BUGA PRESS is a membrane press designed to shape composite materials, veneers, and wood. The multi perforated metal table allows a homogeneous and flawless vacuum. Thanks to its epoxy lacquer, ...

Opening: 50 mm - 1,000 mm
Force: 50 kN - 10,000 kN

Opening: 50 mm - 1,000 mm
Force: 6 kN - 1,600 kN

Force: 20,000 kN

Machine features: - Specific pressure 500 kg/cm². - Specific heater plates: 1,500 x 1,500 mm. - Minimum mold closing speed: 0.03 mm/sec.

Force: 1,500 kN

Machine features: - Closing from the top. - Specific pressure 600 kg/cm². - Safety: light curtain, dual-hand control. Available in single or double-stage version.

Force: 5,000 kN

Machine features: - Closing from the top. - Specific pressure 2,600 kg/cm². - Lower ejection battery.

Description Crimping and Curving Machine consists of feeding device, curving & pressing device and electric control system. The curving machine adopts the formed pressing die to press ...

► Rigid weldment design ► Reliable highly accurate hydraulic system ► Pressing & clamping ► Straightening beam, shaft and section► Rigid weldment design ► Reliable highly accurate hydraulic system ► Pressing & clamping ► Straightening ...

► Rigid weldment design ► Reliable highly accurate hydraulic system ► Pressing & clamping ► Straightening beam, shaft and section

► Rigid weldment design ► Reliable highly accurate hydraulic system ► Pressing & clamping ► Straightening beam, shaft and section

Force: 2,500 kN

... also of complex pieces. Single or double shape forging using up to 5 independent punches, two of them being adjustable. Switch over to producing a new part occurs in just a few minutes, thanks to a state of the art ...

Force: 1,000, 1,500, 2,000, 3,000, 4,000 kN

Mechanical Forging Presses can work in continuous or discontinuous cycle, depending on the requirements. They can be equipped with various accessories needed for deep vertical and horizontal extrusion piece forging. They use a profibus ...

Force: 2,500 kN - 8,000 kN

Mechanical Forging Presses can work in continuous or discontinuous cycle, depending on the requirements. They can be equipped with various accessories needed for deep vertical and horizontal extrusion piece forging. They use a profibus ...

Opening: 1,000 mm

Fully automatic fusing press to back-up textiles with POLYTEX heat-seal glue coated paper, non-woven or fabric. Also suitable for the application of POLYSTRIP hot-melt foil for sample edge protection. Durable and consistent ...

Force: 0 kN - 10,000 kN

Thermoplastic stamp forming press systems Pinette P.E.I. is well-known as a composites press manufacturer that has gathered a deep expertise in the production and implementation of thermoplastic stamp ...

Force: 200 kN - 2,000 kN

... cooling down to room temperature under pressure. PRESS SYSTEM FOR THERMOPLASTIC COMPOSITES CONSOLIDATION Pinette P.E.I. equipment is the perfect fit for your consolidation process. Our compression press ...

Force: 1,000 kN

RTM, HP RTM & C-RTM automated press systems RTM & HP RTM are manufacturing processes used to produce composites structural parts with very high mechanical properties. Thanks to its expertise as a composites molding ...

UP Line - Universal Hydraulic Pressbrakes Standard Accessories: "• Top gooseneck pressbrake die and holders • Bottom die with 5 V-Channels • Adjustment system for taking down or up the table • Pressure gradeless adjustment • Stroke ...

... Accessories: "• Adjustable table height • Top and bottom table with T-Chanels to replace a mould • High capacity workshop forming press with extra 2 guide pistons in both sides • Pressure gradeless adjustment • Stroke ...

UK & UPM Line - Hydraulic Workshop Straightening Presses Standard Accessories: "• Steel welded frame • Easy to operate • Stop at any position • Pressure monometer • Safety valve against overloading • V-Blocks standard ( 2 pcs. ...

Opening: 450, 500, 550 mm
Force: 320, 600, 800, 1,000 kN

Reducton of Mold Wear All movements can be controlled. In this way, the stroke is completed as soon as possible and without permitting the deformaton of the mold. Integrated software that combines hydraulic and mechanical servopress ...

Force: 200, 100, 150 kN

... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...

Force: 100, 30, 60 kN

... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...

Opening: 700 mm - 1,300 mm
Force: 400 kN - 4,000 kN

... components for the control of the machine, protection of motors, security circuits and controls and PLC. The operator comand the machine with a two hand control pulpit. Safety photoelectic barriers. The presses work ...

... components for the control of the machine, protection of motors, security circuits and controls. The operator comand the machine with a two hand control pulpit.

Force: 0 kN - 150 kN

... cooling system. - Electronically oil gauge. Adjustable pressure switch. Electric cabinet fixed in one side of the press. It contains all the necessary components for the control of the machine, protection ...

Opening: 170 mm - 1,470 mm
Force: 0 N - 1,200 N

... of configuration ensures the excellent performance of press, and all the main components for mechanical processing are manufactured by imported machining center, to ensure machining precision of press ...

Opening: 130 mm - 2,230 mm
Force: 0 kN - 3,200 kN

... conservation. •Using Anti-dropping, safety devices with suspension type to make your mold and machine safer. •Using Oil-free self-lubrication, it makes the machine cleaner and more environmentally friendly. •Providing ...

Opening: 3,200 mm
Force: 0 kN - 5,884 kN

... ensures the excellent performance of press, and all the main components for mechanical processing are manufactured by imported machining center, to ensure machining precision of press elements. Why ...

Force: 0 N - 1,500 N

... type S50.x and 40mm for type S100, with an adjustment to 1/100th. • Exactly reproduces the movement of a manual watchmaker press : down the spindle without force on the workpiece, then applying pressure.

Force: 54 kN - 156 kN

... duty design, robust machine structure and certified high grade steels used in production ensures highest durability and longest life time. Four columns system with chrome-plated guides for tamper head improves stability ...

Force: 38 kN

With more than 40 years of experience, technological production and innovative approach in concrete machinery, ELKON has designed single pallet concrete block making machine that aims sustainable high quality and optimum performance in ...

Hydraulic press for locks PI85 Nargesa, with a fast and accurate perforation for the casing , handle and lock hole in a pipe. It's a state-of-the-art NOVELTY in the world of locks. Patented by Nargesa from 2006 makes ...

Opening: 430 mm
Force: 150 kN

... Maximum pressure 700 bar Bench press : PRS15 with 1 speed hand pump Workshop presses : 2 speeds hand pump or pedal control air hydraulic pump Single acting cylinder, spring return (except 100T press ...

Opening: 400 mm
Force: 2,000, 250, 400, 600, 1,000 kN

Unique Features • Made in Denmark with high quality European components • One hand control of variable pressing speed 0-100% • Flexible and easily adjustable daylight • Two heavy duty machined straighteners are included • ...

Opening: 400 mm
Force: 200 kN - 2,000 kN

Unique Features •Made in Denmark with high quality European components •Stenhøj designed double-acting cylinder •Variable pressing speed control •Accessibility for long workpieces •The frame is conservatively designed for ...

Force: 0 kN - 2,000 kN

High Quality - High Reliability Presses Features •0-2000 Ton Pressing Force •Modular Design •1-6 Axes •Guided column og flat guided presses •Fully programmable on operator panel •Stenhøj designed cylinder with extra ...

60 kN Cordless Electro-hydraulic Compression Tool to Crimp Tubular and Al/Cu Lugs and Butt Connectors ESDC60 electro-hydraulic compression tool ✔ Output force: 60 kN ✔ Stroke: 17 mm ✔ Autonomy: 180 to 450 crimping operations with ...

Pneumatic compression tool for crimping ✔ Crimping of loose connections (insulated, end sleeves, disconnects with closed or open barrel, etc.). ✔ Other crimping or applications: cutting of materials, punching… consult us. ✔ Stroke: ...

ESC120 electro-hydraulic compression tool ✔ Output force: 120 kN ✔ Stroke: 25 mm ✔ Autonomy: 110 to 220 crimping operations with battery 4.0 Ah ✔ Cycle time: 5 to 8 s depending on the section ✔ Dimensions: 385 x 315 x 72 mm ✔ ...

Opening: 40 mm
Force: 5 kN

... toggle press with a round ram. The press exert the rated force at the end of the stroke at the bottom dead center. Through this procedure, the high pressure of the press can be achieved ...

Opening: 40 mm
Force: 7.5 kN

The EP 750-40 is manufactured by SOMAUT S.r.l. This manually-operated toggle press is equipped with round ram, and has a force capacity of up to 7,5 kN. It is suitable for applications where large installation area is ...

Opening: 40 mm
Force: 7.5 kN

The L EP 750-40 is a line of L presses that can be used wherever high or long parts are either machined or pressed in, and therefore require a high da light. The tool supports a wide range of applications, such as those that requires ...

Extremely simple construction, high lever operating/pressing force ratio and highest safeguard while working. Press fundamental feature is the easy and quickie interchange and adjusting of punches and dies. It doesn’t ...

RIV2200 is a pneumatic press for self clinching nuts, studs and stand offs; 8 dies included (4 for nuts, 4 for studs for M4, M5, M6, M8). RIV2200 is a pneumatic press for self-clinching fasteners that ...

Force: 68.7 kN

RIV2450 is a pneumatic press for self clinching nuts, studs and stand offs throat depth 450; 8 dies included (4 for nuts, 4 for studs for M4, M5, M6, M8). RIV2450 was made to be safe, flexible, compact, economical, easy ...