Vertical presses

Force: 100 tf
Stroke: 500 mm
Working speed: 4 mm/s

... clamping A mobile control panel provides flexibility, while additional controls are easily accessible integrated in the control cabinet The hydraulic system is designed as stand-alone unit for low maintenance and optimum ...

Force: 150 tf
Stroke: 500 mm
Hydraulic pump power: 4 kW

... clamping A mobile control panel provides flexibility, while additional controls are easily accessible integrated in the control cabinet 2-step hydraulic pump for fast rapid feeds and optimum stroke speeds Precision-machined ...

Force: 200 tf
Stroke: 500 mm
Working speed: 2 mm/s

... clamping A mobile control panel provides flexibility, while additional controls are easily accessible integrated in the control cabinet The hydraulic system is designed as stand-alone unit for low maintenance and optimum ...

Force: 50 kN
Stroke: 260 mm
Table width: 280, 450 mm

... 50 Ton C Frame Press with a selector for selecting the work-mode, two speeds, a pressure switch and light guards in the frontal working area of the press. The cylinder stroke is easy to adjust with the ...

Force: 100 tf
Stroke: 260 mm
Table width: 480, 400 mm

... (∅ 50 mm). We produce this 100 ton C frame press with a selector for manual / semi-automatic / automatic work-mode, two speeds, a pressure switch and light guards in the frontal working area of the press. ...

Force: 50 tf
Stroke: 400 mm
Table width: 450, 280 mm

... accessories Geometry adapted to your requirements (for example larger tables, a larger vertical light or a larger piston stroke for this hydraulic Cframe Press 50T) Software adapted to your requirements Hydraulic ...

Our Four Columns Hydraulic Press solutions are equipped with the most important functions for reliable and productive forming. AMOB is an innovative designer, producer and also servicer of hydraulic presses. Innovation, ...

Our H Frame Hydraulic Press solutions are equipped with the most important functions for reliable and productive forming. AMOB is an innovative designer, producer and also servicer of hydraulic presses. Innovation, ...

Force: 200 kgf
Opening: 54 mm - 200 mm
Stroke: 0 mm - 50 mm

The EMG range of manual rack-and-pinion presses comprises two different types of press: * Rack and pinion manual presses whose power, from 440 to 1,320 lbs, is linear and constant over the entire stroke depending on ...

Force: 400 kgf
Opening: 35 mm - 270 mm
Stroke: 0 mm - 80 mm

The EMG range of manual rack-and-pinion presses comprises two different types of press: * Rack and pinion manual presses whose power, from 440 to 1,320 lbs, is linear and constant over the entire stroke depending on ...

Force: 1,500 kN

Closing from the top Specific pressure 600 kg/cm² Safety: light curtain, dual-hand control Available as single-deck or double-deck machine Implementation examples: dielectric resonator

Force: 5,000 kN

Closing from the top Specific pressure 2600 kg/cm² Bottom ejection battery Implementation examples: brake pads, clutch disks, powder metal parts

Force: 2,000 kN

Implementation examples: connector parts, pharmastoppers

Opening: 1,000, 800, 160, 136, 200 mm
Stroke: 150 mm
Weight: 360 kg

Activated by means of a manual pump. Single-acting cylinder with spring recoil and approximation spindle screw. Solid structure in a monoblock format to ensure greater rigidity of the machine as a whole. Movable bedplate adjustable ...

Opening: 1,000, 163, 800, 136, 200 mm
Stroke: 250 mm
Working speed: 420 mm/min

Activated by means of sensitive manual distributor with 3 positions. Machined attachment on the lower end of the cylinder rod for attaching different tools. Rigid monoblock frame built with ST52 steel. Movable bedplate adjustable ...

Force: 50 tf
Opening: 220, 260, 860, 1,000 mm
Stroke: 250 mm

Activated by means of sensitive manual distributor with 3 positions. Machined attachment on the lower end of the cylinder rod for attaching different tools. Rigid monoblock frame built with ST52 steel. Movable bedplate adjustable ...

Force: 0.5 kN - 50 kN
Stroke: 80, 100, 200 mm
Working speed: 414, 280, 100 mm/s

... French / Spanish / Italian / Romanian / Czech / Hungarian Touch Panel Interface For Servo Press View and analyze process parameters and graphs; comprehensive press control at your fingertips. Compatible ...

Force: 0.5 kN - 120 kN
Opening: 66 mm - 220 mm
Stroke: 80 mm - 400 mm

... our Catalog and Diagram Download or contact us directly. Touch Panel Interface For Servo Press View and analyze process parameters and graphs; comprehensive press control at your fingertips. Compatible ...

Force: 15, 30 kN
Stroke: 0 mm - 40 mm

To meet with more particular production processes, a range of pneumatic presses are specially suitable for crimping, riveting, bending, marking, blanking, punching and raising, with maximum precision and safety. Several types of controls ...

Force: 220 kN - 2,200 kN
Hydraulic pump power: 30 kW
Overall height: 850 mm

... pre-tensioning) as additional services. The robust, heavy design of this bending press guarantees precise bending results. The special feature of this horizontal bending press lies in the use of a ...

Force: 440 kN - 4,400 kN
Hydraulic pump power: 45 kW
Overall height: 1,050 mm

4400 CNC bending and straightening press The “4400 CC” hydraulic horizontal press ticks every box as far as flexibility and the range of performance of the control system are concerned. The CNC control ...

Force: 15 kN
Stroke: 0 mm - 40 mm
Table width: 140 mm

... the high working pressure of the press is achieved using the toggle mechanism with a relatively low effort (approximately 150N) on the part of the user. Toggle presses are therefore used where the full force of the ...

Force: 5 kN
Stroke: 40 mm
Table width: 65 mm

... pressure of the press is achieved by means of the toggle lever mechanism with relatively little effort on the part of the operator. mäder manual toggle presses can be upgraded with various extras which enhance the ...

Force: 30 kN
Stroke: 17 mm
Table width: 150 mm

... in precise Teflon bushings. The press for the Press & Tool system with intergrated, timesaving tool setting system: MICRO ADJUST The precision height adjustment of the press table ...

Force: 10, 6 kN
Stroke: 150 mm

... SCHMIDT® ElectricPress 345 is used in combination with the SCHMIDT® PressControl 700 for the force-displacement-monitoring press system, e.g. in industries E-mobility Gearbox assembly for e-bikes Assembly of battery ...

Force: 800 kN

Specifications: Stroke rate: max. 200 1/min Nominal force: 800 kN Stroke range: fixed stroke with 30 mm Stroke position adjustment: - 8 mm from B.D.C. Tool mounting plate (LxW): 1000 mm x 510 mm Opening size in B.D.C.: ...

Force: 0 kN - 1,200 kN
Opening: 200 mm - 1,500 mm

... Considerable Clamping Force • - Outstanding Precision • - Good Ergonomics • - Parallelism Measuring Function Why Die Spotting Press • - It allows you to conveniently match all the parts of the mould in more comfortable ...

Force: 0 kN - 5,000 kN
Opening: 400 mm - 3,200 mm

... of configuration ensures the excellent performance of press, and all the main components for mechanical processing are manufactured by imported machining center, to ensure machining precision of press ...

Force: 0 kN - 2,000 kN
Opening: 170 mm - 1,870 mm

... Considerable Clamping Force • - Outstanding Precision • - Good Ergonomics • - Parallelism Measuring Function Why Die Spotting Press It allows you to conveniently match all the parts of the mould in more comfortable ...

Force: 1,250 kN
Opening: 1,500 mm
Rate (strokes/min): 120 p/min

The Servo Spindle Press, used as a progressive press, offers all the advantages of spindle drive technology with top-mounted motors. Specifically designed for complex processes, such as in transfer or ...

Force: 3,300 kN
Opening: 1,200 mm
Rate (strokes/min): 100 p/min

Tryout and pilot production press with four servo-hydraulic die cushion systems for fine blanking, embossing and calibrations. Tryout and pilot production press: Blanking and forming parts for drive ...

Force: 100, 150, 50, 200 tf
Opening: 1,250 mm
Stroke: 400 mm

In addition to its adjustable down table mechanism, its t-slot table allows it to be mounted and processed on many different types of workpieces. In this way, most of the sheet metal forming operations can be done with the SDT model ...

Force: 2 tf
Opening: 1,980 mm

High level double chamber textile baling machine. Two times more efficiency with two recepticale. Practical and easy to use. This machine can bale all kinds of scrap cloths.

Force: 200 tf
Opening: 750 mm

We Produce Special Order Workshop Presses Together with you Our Products are According to Customer Oriented Please Don't Be Hesitate to Contact us to Share Your Needs #HidrokarPres export@hidrokarpres.com +90 542 414 7737

Force: 5 tf - 35 tf
Opening: 0 mm - 520 mm
Table width: 500 mm - 500 mm

E-FORM X1 is an agile solution with a compact design for forming small series, excellent for prototyping. Its dimensions allow for easy placement within the production area. The silence, derived from the exclusive use of the electric ...

Force: 196.1, 20, 40, 50, 80 kN
Opening: 0 mm - 550 mm
Stroke: 0 mm - 500 mm

E-FORM XL1, with a solid design and a large working area, allows for better ergonomics thanks to the generous dimensions of the plates that facilitate loading/unloading and cleaning of the moulds. Each plate houses n. 5 resistances for ...

Force: 5 tf - 35 tf
Opening: 0 mm - 520 mm
Stroke: 0 mm - 520 mm

E-FORM X4 multiplies versatility and allows you to optimize working times. The four stations do not burden the automation architecture which maintains limited dimensions and ease of placement within the production area. Once the positioning ...

Force: 490 N
Opening: 155 mm
Stroke: 90, 28 mm

Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...

Force: 1,470.9 N
Opening: 450 mm
Stroke: 63, 100, 160 mm

Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...

Force: 3.9 kN
Opening: 580 mm
Stroke: 70 mm

Available with manual, pneumatic or hydropneumatic control in a range of sizes suitable for riveting, trimming, drawing, keying, sizing, straightening, bending, die-cutting. Suitable whenever adjustable thrust and accurate stroke control ...

... / atmosphere controlled hot press with various features in accordance with the new requirements and the purpose of the process in technology, industry and R&D apart from the standard features. Automatic Sintering ...

... water with a corrosion inhibitor, which is pressurized by an external pump. The pressure chamber of the MSE cold isostatic press is designed to withstand the severe cyclic loading imposed by rapid production rates and ...

Force: 5,000 kgf - 50,000 kgf

... powder presses are ceramic industry, powder metallurgy studies and sample production for mechanical properties. Manual press models are suitable using on the table. Since it works with a double flow pump, it travels ...

Force: 600 tf
Stroke: 800 mm
Table width: 1,300 mm

Vertical clearance between open planes: 1000 mm Clearance between shoulders on operator's side: 1800 mm Shoulder depth: 1300 mm Maximum thrust force of the blank holder: 270 ton-2700 kN Maximum stroke of the blank ...

Force: 200 tf
Stroke: 400 mm
Table width: 650 mm

Fixed top height from ground: 900 mm Vertical clearance between open planes: 650 mm Clearance between shoulders on operator's side: 1250 mm Shoulder depth: 600 mm Maximum press height_ ~3500 mm

Force: 150 tf
Stroke: 400 mm
Table width: 500 mm

Max. vertical clearance between open planes: 400 mm Clearance between shoulders on operator's side: 1050 mm Shoulder depth: 400 mm Maximum extractor stroke: 150mm

Force: 100 tf
Opening: 500 mm
Stroke: 500 mm

H-Frame hydraulic stamping press for sheet metal deformation and assembly. The PST press is made with a monolithic frame, assembled and TIG welded with internal reinforcements. The mobile upper plane ...

Force: 170, 60, 85, 125, 35 tf
Stroke: 500 mm
Table width: 700, 900, 800, 1,000 mm

Hydraulic c-frame press for stamping, drawing and sheet metal deformation. The MCL hydraulic press has an approach speed of the main cylinder of up to 125 mm/sec and is equipped with a mobile upper ...

Force: 40 tf
Opening: 900 mm
Stroke: 500 mm

The hydraulic straightening press with sliding platform, model PBM 40, is the ideal hydraulic press for carrying out straightening work on sheet metal and metals in general. It can also be widely used ...

Force: 1,600 kN - 16,000 kN
Stroke: 500 mm - 1,000 mm
Return speed: 125 mm/s - 400 mm/s

... forging press equipment should have high strength, good rigidity, good precision, and high safety. Zhengxi has continuously developed and improved cold extrusion technology. At present, the position control accuracy ...

Force: 120 tf - 315 tf

... to ensure the accuracy of the tires. The tire mold pressure testing machine is a type of hydraulic press. Based on the commonly used hydraulic press, the pressure is slowly applied to the tire mold, ...

Force: 880 kN
Opening: 196 mm
Max. pressure: 250 bar

... one vertical punch, a very high speed, and the option to produce up to 3 parts per stroke. V1.32 is the more specific model for a determined type of parts, with fast die changeover and the robustness of the Neotecman ...

Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar

... both press and furnace, incorporating a robot for versatile billet positioning. This enables multiple billets, symmetrical placement, varied orientations, or simultaneous processing of multiple billets. Punches: 4 ...

Force: 996 kN
Opening: 500 mm
Rate (strokes/min): 4,000 p/h

... weight. Moreover, Neotecman’s design is based in a double structure for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, symmetric billets, ...

Force: 400 kN - 4,000 kN
Opening: 700 mm - 1,300 mm

The structure is made in thick steel plate, welded, stress relieved and shot-blasted. The cylinders, made out of special steel, have guides of bronze and the pistons rods are case-hardened and chromium-plated. The slides are guided ...

The structure is made in thick steel plate, welded, stress relieved and shot-blasted. Transversal movement of the cylinder. System with hydraulic cylinder for lifting the steel plate from the table of the machine. Longitudinal ...