|
|
Mustang: a concentrate of safety and comfort, ESD
Protective end ABG (200 joules IN ISO 20345-1), fitting ergonomic, anatomical arch of the foot and insert anti-perforation (IN ISO 20344-1) for safety, lining Cambrelle ® for comfort.
Very modern design and sporting look
Non-skid sole SPORTY®, with the profile curves Parabolic® (exclusive patent of Lemaitre Sécurité). The concave structure of this sole supports an excellent adherence on all the industrial grounds. Moreover, during walk, after the phase of crushing, energy is restored thus causing a dynamic effect; an effect arises anti-tiredness.
Model MUSTANG is ESD (ElectroStatic Discharge), i.e. it protects from the electrostatic discharges. It is consequently particularly recommended, inter alia, in auto industry (cabins of painting), electronics, etc...
Aired model, out of leather flower black, very comfortable and which lets well breathe the foot.
There exist other models for clean rooms, etc...
|
|
- Moulded waterproof ankle boot (stitched tongue gusset
with lacing through waterproof rings ).
- Edged collar .
- Same chemical and mechanical resistance as the
SECUREX range from which it was developed.
- Same sole and lining.
- Average height: 120 mm.
|
|
The HELIUM range benefits from the AMS Concept (shoes which are totally non-metallic therefore non-magnetic ).
Focussed technology :
> Synthetic protective toe cap: light and resistant (200 joules),
> Para-aramid anti-penetration insert: lightweight, flexible, unalterable, resistant to penetration over 100% of the surface of the sole.
> Parabolic® (exclusive Lemaitre Sécurité patent) anti-slip sole with a curved profile and a double density insert at the heel. The concave structure of the sole promotes an excellent grip on all industrial floors. Moreover, during walking, after the compression phase, the energy is restored giving a dynamic effect: a spring effect. The effect is bolstered by a double density window inserted on the side of the heel for added energy absorption.
> Sole is resistant to oils and acids.
> Delimited heel for an added safety in many situations
Benefits for the users; these styles are:
> Impervious to thermal variations and transfers from -10ºC to +40ºC,
> Undetectable by security scanners
> Lightweight and exceptionally comfortable.
Recommendations: recommended for the electronic and electric industries, airports, logistics and transport, automotive supplies industry, controlled areas in factories,…
|
|
OUTDOOR SAFETY SHOE
EN 345 - S1P
X2000
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
BOTSEC. Viscose lined PVC safety boot, steel midsole and toecap. Green colour. Advantages : Quality of an european made product. Softeness of the PVC. Comfort and resistance. Resistant sole against hydrocarbons.
Sizes 39 to 45. CE EN345 S5.
|
|
ABSOLUTE SAFETY BOOT
EN 345 - S5
HERCULES
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
Lining
|
|
CHIMIE SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts.
Comply with standards :
ISO EN20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
HYPALON SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to corrosive chemicals, particulary to concentrated and hot acids, fuels and solvents.
Excellent resistance to abrasion and cuts.
For use with protective clothing in hostile environments.
Comply with standards :
ISO EN20345 S5 HRO CR SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
EN 13832-3 B L M N
Boots highly resistant to chemicals :
Acetone (B)
Sulfuric acid (L)
Nitric acid (M)
Acetic acid (N)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
SECUREX SA Boots (safety toe cap + anti-perforation mid-sole)
Good resistance to abrasion.
Very good resistance to heat
Outsole resistant to fuel oil.
Comply with standards :
ISO EN20345 SBPE SRC
Perforation resistant (P)
Heel energy absorption (E)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
CHIMIE SA Thigh Waders (safety toe cap + anti-perforation mid-sole)
Jersey both sides version (inside and outside with jersey lining)
Shark skin version (inside with jersey lining, outside without lining)
Perfectly waterproof, excellent insulation against the cold, light and flexible
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts (jersey both sides version).
easily washable (shark skin version) for sewer workers.
Comply with standards :
ISO EN20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13382-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
|
SHOES FOR CREWS® has redesigned the Guardian to be even more durable and comfortable. The Guardian is the only chemical, oil and grease-resistant boot built with technologically superior slip-resistance and anti-bacterial protection. And for added comfort, this rubber boot features our anti-fatigue cushioned insole
|
|
Double-sided device on wheels. Heated air drying (regulated) boots and shoes. Disinfection by ozone generator. Startup manual or programmable. Valves closing system on each tube. Time of drying: between 30 min and 2H00. . Available in 40, 50, 60, 70 pairs. Stainless steel (Also available in steel epoxy painting).
380 V Tri + ground + Neutral - 5700 Watts
|
|
ABSOLUTE SAFETY BOOT
EN 345 - S5
ARTEMIS
Sole PVC
Toecap Steel
Midsole Steel
Size Range 38-47
Category S5
|
|
TST SA 20000V Boots (safety toe cap + anti-perforation mid-sole)
Electrically insulated boots that protect workers from risks of pace voltage when there is a line-to-ground voltage fault during an intervention on alternative current 20 000V nominal voltage power supply network.
Made of dielectric rubber.
Individually tested.
Comply with standards :
Specification EDF : HTA 70B
Individually tested at 13 000V
Maximum leakage current 7mA
ISO EN20345 SBPE CI SRC
Perforation resistant (P)
Heel energy absorption (E)
Cold Insulated (CI)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
* made of steel for sizes 3 and 4,5.
|
|
FIREMAN SA Boots (safety toe cap + anti-perforation mid-sole)
Excellent resistance to heat contact, heat flow, fire.
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids.
Excellent resistance to abrasion and cuts
For use with protective clothing in hostile environments.
Comply with standards :
EN 15090 type 3
Boots suitable for emergency situation or fire involving release of hazardous chemicals that can cause loss of life.
EN20345
S5 HRO SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
EN 13832-3 J K R
Boots highly resistant to chemicals :
n-Heptane (J)
Sodium Hydroxide(K)
Sodium Hypochloride (R)
EN 13287
Sole slip resistance (SRC) :
- Ceramic floor.
- Steel floor.
Marine fire protection equipment certified by VERITAS, notified body N°0062
* made of steel for sizes 3 and 4,5.
|
|
| ... products without technical information |
| |
|
|
