|
|
- Moulded waterproof ankle boot (stitched tongue gusset
with lacing through waterproof rings ).
- Edged collar .
- Same chemical and mechanical resistance as the
SECUREX range from which it was developed.
- Same sole and lining.
- Average height: 120 mm.
|
|
Sole PU/PU
Available in S2 or S3
- Steel or non metallic toe cap 200J
- Steel or Kevlar insole
Available from size 36 to 50 (UK Sizes from 2 to 15)
Metatarsal protection articulated and ergonomic
ROBUSTA® EXCLUSIVE PATENT
Specialy recommended for: telephonic, mechanical, railways assemblies, ship-yards, metal industry, foundry work and boler-making.
|
|
GORE-TEX HPR lining
Lightness
Sole PU+N (Contact heat resistance 300ºC)
ROBUSTA® Slip Resistance Coefficient: 0.28
Non Bending System
Available in S2 and S3
- Steel or non metallic toe-cap
- Steel or Kevlar insole
Shock Absorbant Effect
Etra wide last
Sizes from 35 to 50 (UK Sizes: from 2 to 15)
|
|
SPECIALLY FOR EXTREME COLD
THINSULATE® lining, breathable, cold insulation
Sole PU+N Resistant to extreme cold -40ºC
Lightness
Non Bending System
Available in S2 or S3
- Non metallic toe cap 200J
- Steel insole
Shock Absorbant Effect
Extra wide last
Available from size 36 to 50 (UK Sizes from 2 to 15)
|
|
- EASY TO WEAR = To put on over the shoe
- PRACTICAL = A strap allows the altering to any urban shoe.
- EFFECTIVE= Steel toe cap 200 J to protect.
- HYGIENIC = No contact direct with the foot ; it’s not necessary to unodorize or clean like with the other safety shoes.
- REUTILISABLE FOR LIFE = made for lasting
- 1 box of Millenium Pied Protect® is delivered with:
* 1 pair size 1 - from 2 1/2 to 6
* 2 “ “ 2 - from 40 to 44
* 2 ” “ 3 - from 45 to 48
We advise you to shift the size of the Millenium taking account of the width of the urban shoe
|
|
Special leather 100% washable
Tight-fitting system with LYCRA®. Water repellent
Lightness
Sole PU/PU
ROBUSTA® Slip resistance coefficient: 0.34
Non Bending System
Available in S1 and S1 + P
- Non metallic toe-cap 200J
- Steel or Kevlar insole
Shock Absorbant Effect
Extra wide last
Available from size 34 to 50 (UK Sizes from 2 to 15)
|
|
|
|
|
|
ELECTROINDUSTRIAL
Sole
- Polyurethane mono-density
- Adherence: SRC
- Density: 0,53
- Thickness: 6 mm
- Height of cramps: 2,6 mm
- Abrasive resistant (loss of volume): 157 mm3
- Tear strength: 5,7 kN/m
- Flexural strength (after 30.000 cycles): 0 mm
- Resistance to hydrocarbons: 3%
- With or without sole antiperforation
Stem
- Leather Stem full damp-proof flower and oléofuge.
- Calendered ventilated antisudation and antimycosic not woven Lining.
"More" produced
- Inner sole great comfort, antisudation and antimycosic.
- Polyurethane mono-density Sole for a better comfort and more lightness, resistant to oils and hydrocarbons.
- Cambered support of arch of the foot, heel taken down for unevenness, end steel resistant to 200J,
- "SHOCK ABSORB®": integrated shock absorber offering a true feeling of "bounce".
- E.S.D./ELECTROSTATIC DISCHARGE:
Electrostatic shoe: shoe whose electrical resistance is higher than 50 kOhms (0,05 MOhms) and lower than 100 MOhms
Standards of references = IN 61340-5-1 (supplemented by reports IEC 61340-4-3 and IEC 61340-4-5
Symbol marking = ESD + triangle drawn with the top of marking ESD.
|
|
RANGERS TST
Sole
- Sole rubber nitrile
- Coeff. of adherence to smooth and fatty industrial grounds: /
- Density: 1,15
- Thickness: 7 mm
- Height of cramps: 6,5 mm
- Abrasive resistant (loss of volume): 86 mm3
- Tear strength: 11,4 kN/m
- Flexural strength (after 30.000 cycles): 0 mm
- Resistance to hydrocarbons: 1,5%
- With sole antiperforation
Stem
- Stem leather full damp-proof flower and oléofuge.
"More" produced
- For Work Under Tension (answering specifications EDF of the m.t. N°70/Résistance up to 5.000 Volts has).
- First of leather assembly.
- Sole of wear rubber nitrile, particularly resistant (thanks to its traditional bent assembly) to oils,
with hydrocarbons and the strong temperatures (>300°).
- Bent double assembly, flexible, traditional with two seams.
- Non-skid Relief of wear of a dynamic adhesion coefficient very high.
- Lacing and closing with loop for a fast opening.
- Wire of seam pitched for a better resistance and sealing.
|
|
|
Hot Sun BG S1P: Leather full flower nubuck and mesh microphone-ventilated, sole PU/TPU, textile antiperforation, lining nets 3D, end composite, without metal. Use for industry.
|
|
|
New 1000 Model Woman Leather full flower sole PU2D Antiperforation steel, lining microfibre, end steel.
|
|
|
Mustang: a concentrate of safety and comfort, ESD protective End ABG (200 joules IN ISO 20345-1), fitting ergonomic, anatomical arch of the foot and insert anti-perforation (IN ISO 20344-1) for safety, lining Cambrelle ® for comfort. Very modern design and sporting look non-skid Sole SPORTY®, with the profile curves Parabolic® (exclusive patent of Lemaitre Sécurité). The concave structure of this sole supports an excellent adherence on all the industrial grounds. Moreover, during walk, after the phase of crushing, energy is restored thus causing a dynamic effect; an effect arises anti-tiredness. Model MUSTANG is ESD (ElectroStatic Discharge), i.e. it protects from the electrostatic discharges. It is consequently particularly recommended, inter alia, in the car industry (cabins of painting), electronics, etc… Aired model, out of leather flower black, very comfortable and which lets well breathe the foot.
|
|
• White leather upper
• High wicking lining
• SFC™ rubber outsole providing comfort and durability and excellent slip resistance and flexibility
• Lightweight EVA footbed
• Antistatic
|
|
D1-6500 D1-6500 S3 / D1-6500 S2
Safety shoes
Conform to the standards EN ISO 20345:2004
Upper: leather
Lining: antiabrasion texile
Toecap: extra large AM
PU Sole : D1 (PU/Dual Density)
Characteristic: leather protection padded tongue
|
|
Behind every man is a good shoe, and with the new Aristocrat, you're the man.
Send a message to colleagues and superiors that demands respect with its sleek contouring enhanced with our SFC III™ Slip-Resistant Outsole.
Buffer the stress of hectic work weeks with cushioned insoles, and lessen the impact of long days with outsoles designed to absorb shock.
Premium full grain leather makes this the savvy choice for any decision-maker. Get the respect you deserve with the Aristocrat, a superior shoe for every man.
|
|
For everyday wear. They are practical, comfortable and elegant, and suitable to be worn with city clothes or uniforms.
City-style work shoes, from the Allegro range from Jallatte.
Full grain leather with a leather lining for optimum wearer comfort.
Featuring the Dynam’Air concept. This ventilation system, built into the shoe, is based on the generation of an airflow around the foot, to keep it dry, which is continuously renewed by the natural movement of walking.
The sole is stain and hydrocarbon-resistant
Standard: EN 347-1 ORO E
Sizes: 6 – 12
|
|
CityZen range
Sirius S3Ci: « Derby » design with black full-grain leather, supple and resistant. Leather lining. AMS Concept (non-magnetic system)
AMS Concept (non-magnetic system) : fully non-metallic hence non-magnetic, the styles benefiting from this technology have multiple advantages :
>> Impervious to thermal variations and transfers,
>> Undetectable by security scanners,
>> Exceptionnally comfortable,
>> Lightweight, without any concession to safety.
Lightweight and very resistant protective toe cap in polycarbonate (200 joules - EN ISO 20345).
Anti-perforation insert in para-aramide material, lightweight, flexible, unalterable, resistant to perforation over 100% of the surface of the sole (EN ISO 20345).
Recommendations : for all personnels in civilian attire or in uniform, from offices to workshops, in controlled areas, in airports, in warehouses, etc.
|
|
ABSOLUTE SAFETY SHOE
EN 345 - S3
X1110
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
D2-65 MW S1/S1P microfibra
D2-65 MW S2/S3 microfibra
D2-65 LW S2/S3 Lorica®
Safety shoes
Conform to the standards EN ISO 20345:2004
Upper: microfiber or Lorica®
Lining: antiabrasion textile
Toecap: extra large AM
PU Sole : D2 (single density PU)
Characteristic: Nylon hooks
Padded protection tongue
Split half insole to protect socks
|
|
Salisbury has the exclusive Dielectric ANSI Z41 Footwear and ASTM F1117 Dielectric Footwear.
All Dielectric ANSI Z41 Footwear:
- 100% Waterproof
- Super Dielectric tested to 20,000 volts
- Dielectric tested to 14,000 volts
- Premium grade ozone resistant rubber.
- Nonmetallic buckle hardware
All ASTM F1117 Dielectric Footwear:
- All overshoes conform with ASTM F1117 "Standard Specification for Dielectric Overshoe Footwear" and are tested to ASTM F1116 @ 20kV.
- Premium grade ozone resistant rubber.
- Flexible hand-layered construction-100% waterproof
- Nonskid Bar Tread outsole
- Nonmetallic buckle hardware
- Designed to provide utility workers and contractors additional protection from electrical hazards.
- Made in U.S.A.
- Nonmetallic buckle hardware
|
|
ABSOLUTE SAFETY SHOE
EN 345 - S1P
BESTSUN
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 38-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
ABSOLUTE SAFETY SHOE
EN 345 - S3
X0600
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
For coping with unpredictable situations: very rough and dirty surface conditions or frequent changes of environment.
Original-design all-terrain hiking style safety boot, featuring a safety toecap (200 Joule) and a puncture-resistant midsole.
Full grain water-repellent leather with an ergonomic TPU reinforcement at the front for greater sturdiness and a longer working life. Ankle Protector side reinforcement to protect ankles from lateral impact.
J-ESCAPE walking sole:
- Progressive heel shock absorber to protect your back and joints from high-intensity shocks and vibrations.
- Resistant to direct heat contact up to 300°C
- Deep, multidirectional self-cleaning sole patterns for maximum grip in all situations.
Standard: EN 345-1 S3 HRO.
Sizes: 5-13
|
|
Lemaitre Sécurité’s SPORTY® range: safety, comfort and looks
ABG toe cap, anatomical arch support, sole in nonslip Gummilem, highly abrasion resistant leg reinforcement, Cambrelle antiperspiration lining….. are the key points to remind that the SPORTY® range of Lemaitre Sécurité is one of the safest on the market for foot protection, in spite of its innovative looks similar to a casual shoe.
SPORTY® benefits also from an exclusive Lemaitre Sécurité patent: the Parabolic® sole featuring a curved cross-section which offers optimal grip and comfort for the wearer. The injected sole insures good ventilation of the foot and optimum perspiration management.
The SPORTY range finally demonstrates that safety footwear no longer needs to be hidden away! By combining its creative talents with state-of-the-art technology, Lemaitre Sécurité has product a safety shoe that looks great, is comfortable and is as light as a casual shoe.
|
|
|
Lemaitre Safety produces and sells safety shoes under the Lemaitre brand. As a specialist, Lemaitre Safety controls all the stages of manufacturing, including business intelligence, creation, development and industrialization. With more than 2.500.000 pairs per year, Lemaitre Safety is one of the most sold brand of safety shoes in the world : 55% of the turnover coming from exports and presence in 80 countries
|
|
cosmos S3 EN 20345
Sole PU/TPU
Toecap Composite
Midsole Kevlar
Size Range 38-47
Category S3
Lining Cambrella
Insole Premoulded
|
|
ABSOLUTE SAFETY SHOE
EN 345 - S1P
TOPJOGGER
Sole Dual density PU
Toecap Steel
Midsole Steel
Size Range 36-47
Category S1P
Lining Cambrella
Insole Premoulded
|
|
|
Ottawa S2: Leather stem, sole PU2D calendered not Woven lining, end, steel, fitting extra broad, also exists in composite.
|
|
EN ISO 20345 S1P
Metallic toe cap to 200joule, lighter in weight and more comfortable
Metallic midsole providing puncture resistance
Water resistant leather uppers
Rubber sole unit for excellent grip
Anti-static
Breathable moisture wicking linings for extra comfort
Soft padding around tongue and collar areas
|
|
GALOSCHE N food industry / White-Grey
COD: FS00 W1P1 00 (OB - A - FO)
Homologation: EN ISO 20347:2004
Upper: nitrile PVC
Lining: Polyester.
Sole: nitrile PVC
Sizes: 35/47
Weight: Gr 830
Packing: each pairs in polybag// 12 pairs per carton
Characteristic: Wide last for the best comfort.
Shock absorbing in the heel area. Antistatic.
Resistant to animal fats (ISO 6112-92).
Norms: EN ISO 20347:2004 issued by CIMAC Vigevano (Pv)
Use: food industry
|
|
In the food industry, workers must be protected from slipping and cleanliness must be maintained. It is essential that footwear is hygienic, easy to maintain and comfortable.
Upper: high quality perforated leather with strap.
Internal lining: leather.
Sole: Non-slip Softane
Standard: EN 346-1 PB A E
Toecap: 100 J steel.
Antistatic
Performance:
Easy to put on and take off.
Comfortable leather linings
Fatigue reducing Heel System.
|
|
|
|
