Solenoids

1842 Industrial products | 446 Companies
 
 
Dictator Technik
Holding solenoid Dictator Technik

DICTATOR electromagnets are mainly used for hold open systems on fire
protection doors. Electromagnets for flush mounting are the perfect solution when there is not enough space between the door and wall or when the magnet should be installed in a less ...

Holding solenoid for fire protection Dictator Technik

Point 4.9.21 of the standard EN 14600:2005 stipulates that when fire protection doors are closing there has to be an acoustic and optical alarm signal - ...

Power off holding solenoid  ST/RM Series Dictator Technik

DICTATOR electromagnets with feedback contact are used when information
as to whether the counter plate adheres to the magnet (i.e. that the door is
opened or closed) is required elsewhere. This is necessary for fire protection doors integrated ...

CIRCONTROL SA
Holding solenoid  24 V, 67 mA, 400 N | FD-RE110 CIRCONTROL SA

Electromagnetic retainer for surface mount. Force ...

Door holding electromagnet  24 V, 67 mA, 400 N | FD-RE100 CIRCONTROL SA

Electromagnetic retainer for surface mount with manual relaease ...

FESTO
Pneumatic solenoid valve  VUVG FESTO

New: pneumatic valve VUWG and modular valve terminal kit VTUG

Benefits:

* Footprint = higher flow rate with less space requirement
...

Distribution block/solenoid valve  Typ CPX/MPA FESTO

Flow rates: 360 to 700 l/min
Widths: 10 and 20 mm
Variability: flexible compressed air supply, variable ...

Pneumatic solenoid valve  Typ MFH FESTO

* Connection G1/4
* Flow 900 ...1 000 l/min
* Voltage 12, 24, 42, ...

ODE
2/2 way direct acting solenoid valve  DN 1.7 - 4, max. 30 bar | 21T1BVXX-F ODE

Direct acting S.V. for interception of fluids compatible with the
construction ...

2/2 way pilot operated piston solenoid valve  DN 12, max. 25 bar | 21PW3K0T120 series ODE

S.V. with pilot control for interception of fluids compatible with
the construction materials.
A minimum operational ...

2/2 way solenoid valve  DN 11 - 25, max. 16 bar | 21HT3K0Y series ODE

Combined operation S.V. for interception of fluids compatibles
with ...

Danfoss Industrial Automation
2/2 way direct acting solenoid valve  0 - 30 bar, 0.04 - 0.26 m3/h | EV210A Danfoss Industrial Automation

EV210A, Direct-operated 2/2-way compact solenoid valves:

EV210A covers a wide range of small, direct-operated 2/2-way solenoid ...

2/2 way direct acting solenoid valve  ISO 228/1 G 1/8" to G 1" Danfoss Industrial Automation

EV210B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV210B is a real robust valve ...

2/2 way solenoid valve for aggressive media Danfoss Industrial Automation

EV250B, Assisted lift operated 2/2-way solenoid valves
EV250B with assisted lift can operate from zero and up to 10 bar differential pressure.
This 2/2-way valve program is especially to use in closed circuits ...

THE LEE COMPANY
High flow pilot solenoid valve  max. 4.0 gpm, 3 000 psi THE LEE COMPANY

The Lee Company's miniature 3-way High Flow Piloting Solenoid Valve offers dramatic space and weight savings as well as high reliability and performance. Available in a single coil configuration, the compact valve ...

Pilot operated 3-way solenoid valve  max. 0.31 gpm, 3 000 psi | 250 series THE LEE COMPANY

The Lee 250 Series Solenoid Valve sets a new standard in reducing space, weight and power consumption. This 2 position, 3-way miniature piloting solenoid valve features Lee's unique and patented MultiSeal technology. The ...

Chemically inert solenoid valve  20 psig THE LEE COMPANY

The new Vacuum Rated LFV Series MIV is a 2-way, normally closed, chemically inert solenoid valve that is ideal for fluidic circuits that will see both positive and negative pressures, such ...

Aircomp by Stampotecnica
Manifold solenoid valve  SIM 150 Aircomp by Stampotecnica

Valve Line SIM 150 features a flexible and easy assembling, that is typical of
valves on manifold, along with the advantages of the electric and pneumatic
cabling system belonging ...

Pneumatic solenoid valve  MP 160 Aircomp by Stampotecnica

The even more increasing demand for great compactness and versatility
of pneumatic products has led us to develop AIRCOMP MP 160 valves Line.
MP valve islands can be considered real integrated systems. Besides their
remarkable flexibility in usage and outstanding performance, we ...

3/2 way pneumatic solenoid valve  max. 10 Bar, 55 Nl/min | 110 1/8" - ø4 Aircomp by Stampotecnica

Aircomp Solenoid Valve Line 110 has been designed in order to offer the greatest versatility in use and thus, satisfy the several application requirements that market demands.
The battery assembly of modular ...

Ningbo Longteng Hydraulic Components Co.,Ltd.
2-way solenoid valve  300 bar | LTSV series Ningbo Longteng Hydraulic Components Co.,Ltd.

Max. Operating Pressure:300Bar
2-way 2 position poppet type cartridge solenoid valve
• ...

2-way solenoid valve Ningbo Longteng Hydraulic Components Co.,Ltd.

hydraulic solenoid valve

electric valve

continuous-duty solenoid

hardened seat for long life

efficient wet-armature ...

VUOTOTECNICA
Servo-controlled 3-way vacuum solenoid valve  max. ø G2 ″, max. 1 000 mbar | 070813 VUOTOTECNICA

A new, fully innovative series of solenoid valves for vacuums to guarantee exceptionally low response times have been created from Vuototecnica research and experience.
They are three-way vacuum solenoid valves, ...

Direct drive 2-way vacuum solenoid valve  max. ø G1 ” | DDN14, DDN25 VUOTOTECNICA

Direct drive 2-way vacuum solenoid valves
These state of the art solenoid valves feature minimal overall dimensions
and high volumetric efficiency and high response speed at any vacuum level.
They are the result of an attentive choice of materials, state of the art
constructive techniques and of the in-depth knowledge of our technicians.
This ...

Direct drive 3-way vacuum solenoid valve  max. ø G1 ” 1/2 | 070x40NC, 070x40NO series VUOTOTECNICA

Direct drive 3-way vacuum solenoid valves
These direct drive 3-way, 2-position vacuum solenoid valves feature conical shutters servocontrolled by the vacuum.
As a standard they are normally closed, but they can be supplied normally open upon request. They are composed of an anodised aluminium body where the connections are
located, two silicon shutters assembled onto a stainless ...

DWYER
2-way direct acting solenoid valve  max. 12 bar | SSV-B series DWYER

are compact, general-service, two-way guide type solenoid valves for air, gas, water, and other liquid applications. They are available in brass with ...

2-way indirect acting solenoid valve  SBSV-S DWYER

are compact, general-service, two-way guide type solenoid valves for air, gas, water and other liquid applications. They are available in SS with a normally ...

2-way indirect acting solenoid valve  SBSV-B series DWYER

are compact, general-service, two-way guide type solenoid valves for air, gas, water and other liquid applications. They are available in brass with ...

TEKMATIC srl
3/2 way solenoid valve  22 - 32 mm | Exx series TEKMATIC srl

Solenoid valves 3-2/2 way - Size 22,30 and 32 mm
Directly operated solenoid valves 3/2 and 2/2 way:
ED ...

4/2 way pneumatic solenoid valve  1/8" - 1/2" | EC, DC series TEKMATIC srl

Available with G1/8"-1/4"and 1/2" connection, the EC / DC Series have the benefit ...

Pneumatic solenoid valve  1/8" - 1/4" | ES, DS series TEKMATIC srl

The new ES / DS Series complete the old EC / DC Series. The mail featuresof these new ...

Pizzato Elettrica
Solenoid interlock Pizzato Elettrica

NEWS 2009
SAFETY HANDLES P-KUBE LINE

Thanks to the experience in the field of safety switches, Pizzato Elettrica introduces an innovative line of safety handles called P-KUBE.
This new line represents the answer to practical issues that the operators have with the application of safety switches on machinery guards, like the ease of installation, the precise mechanical movements ...

Solenoid interlock for safety and access control Pizzato Elettrica

NEWS 2010
NEW SAFETY HANDLE VF AP-S SERIES

To complete the offer on safety handles sector, Pizzato Elettrica has recently introduced into the market the new handle VF AP-S series.
This new line, which represents the answer to practical issues that the operators have with the application of safety switches on machinery guards, can be applied on guards ...

recherche-kwref www di En 2012-05-21-27