Solenoids

Voltage: 6 V - 24 V
Force: 50 N

... formerly Mechetronics) open-frame linear solenoids are typically utilized in various industries due to their robust and cost-effective design. These products are distinguished as a pull or thrust types of solenoids, ...

Voltage: 50 V - 320 V

This is an AC solenoid manufactured by Penny & Giles which is designed for extremely short closing time of about 8 to 18 milliseconds. For this specific model, it comes with a high initial attracting force. These solenoid ...

Voltage: 6 V - 48 V
Stroke: 4 mm
Force: 2 N

... cylindrical solenoids are an ideal solution for opeartions that demand a compact size device with performance that matches or even exceeds the larger open frame (C and D frame) solenoid designs for a ...

Voltage: 205, 24 V

... g Weight complete solenoid: approx. 6 g Coil terminals: Flying leads 10 cm Voltage: 24 V DC 90 % of our solenoids are made to customers’ specifications. Please do not hesitate to contact ...

Voltage: 205, 24 V

The BI 13-F-24V DC-25% ED is manufactured by Kuhnke, and is a linear solenoid that has an insulation group that complies with the VDE 0110 C 75 standards. The unit has a rated test voltage of 500 V and a voltage rating ...

Voltage: 205, 24 V
Force: 0.18 N - 12 N

The Bistable Solenoid, developed by Kuhnke Solenoid Technology, is 90% made to customers specifications. It comes with 800 V test voltage, 11 ms drop-out time, 22 ms actuation time (ED), 9.5 W nominal ...

Voltage: 220, 12, 24, 110 V

The Series 01V’s Solenoid is equipped with an IP65 IEC 60529 level of protection (with connection). It comes with a ± 10% voltage tolerance. A 100 % duty cycle is guaranteed. The Solenoid is also built ...

Voltage: 12, 220, 24, 110 V

VOLTAGE TOLERANCE: ±10% CLASS OF ISOLATION: H CEI EN 60085 DUTY RATE: 100% ED TERMINALS: INDUSTRIAL AMP DEGREE OF PROTECTION: IP65 IEC 60529 with connector

Voltage: 24, 48 V
Stroke: 0 mm - 50 mm
Force: 0 daN - 20 daN

... daN minimum) . The solenoid can be supplied on a permanent basis with, on operate, the same performances as the 5% version solenoid. . 2 TOR inputs can be programmed. :. On operate power requirement ...

Voltage: 6 V - 230 V
Stroke: 0 mm - 8 mm

... manufactured by Tec Automatismes, is specifically designed as clapper solenoid or actuator. This device is available in several types of clapper solenoid, actuator, and clapper solenoid ...

Voltage: 6 V - 220 V
Stroke: 0 mm - 4.5 mm

The 7613 is manufactured by Tec Automatismes, and is available in two models which is a clapper solenoid and an actuator. The unit has a rated power supply that ranges from 6 V DC up to 220 V DC, and weighs 40 g. It has ...

Voltage: 24 V
Force: 700, 1,000 N

The holding solenoid is manufactured by Dictator, and is highly suitable for hold open systems on fire protection doors. It is also utilized for the flush installation of the EM GD 50 U35, which has a standard flush ...

Voltage: 24 V
Force: 700 N

... DICTATOR electromagnets are equipped as standard with a spark extinction diode. In the event of faulty connection, the integrated polarity protection prevents the spark extinction diode from being destroyed. As counter ...

Voltage: 24 V - 230 V
Force: 600 N - 2,000 N

The electromagnets of the R range are available with a diameter of 50, 60 and 70 mm. They differ in holding force and size. For an easy connection the electromagnets of the R range are provided with ...

Voltage: 24 V
Force: 650, 1,300, 2,000 N

Explosion proof electric door holder magnets - Door holder magnets with 650 N, 1300 N or 2000 N force - Certified according to ATEX, IECEx, DNV-GL - 24 V DC - Cable halogen and silicone free - for use in hazardous locations zone ...

Voltage: 9 V - 230 V

The TM30P is manufactured by Jaksa, and is a power-saving solenoid that has a rated energy consumption that has been reduced of up to 95%, thus having lower operating costs. The unit has a rated power that ranges from ...

Voltage: 12 V - 400 V

The Jaksa Solenoid is developed with IP 65 protection class with properly fitted plug. It comes with continuous duty, +/- 10% at AC and +/- 5% at DC voltage tolerances, and class F or H wire insulation. In addition, this ...

Voltage: 12 V - 230 V

The JAKA TMEx35/A/B/C/D and TMEx40/A/B/C/D are explosion-proof solenoids developed by Jaksa. They are mainly used as actuators with JAKA solenoid valves. These units are built with I 2G Ex e mb II T4/T5 ...

Voltage: 24 V

A permanentelectric electromagnet is a device aimed at transforming electrical energy into mechanical energy. Direct current electromagnet are produced in ferric alloys and operate at 24 V. Features: Degree ...

Voltage: 24 V

The attraction and holding of ferromagnetic objects is effected by passing an electric current through the coil of the electromagnet. When the power current is disconnected, the object held is released. When working with suspended loads ...

Voltage: 24 V

This types of electromagnets are made with ferrous alloys and operate at 24 V DC. On request, can also be manufactured for alternating current. Its operation is very simple: when current is activated, a magnetic field ...

Force: 6 daN - 400 daN

ROUND SUCTION CUP BREAK •The Round breaking suction cup allows the maintenance of ferromagnetic pieces and their release by electrical signal. •Suction Power Out: - Maintenance by feeding the coil - Take-off power loss •Essentially ...

Voltage: 12, 24, 48 V
Force: 20 daN - 50 daN

... breaking suckers All our electromagnetic locks, magnetic suction cup, access control, anti-drift, magnetic security lock, electromagnet ... are made exclusively in France, the company Perjes.

Voltage: 12, 24, 48 V
Force: 20 daN - 100 daN

... paint RAL9001 All our electromagnetic locks, magnetic suction cup, access control, anti-drift, magnetic security lock, electromagnet ... are made exclusively in France, the company Perjes.

Voltage: 24 V
Force: 1.4 N - 850 N

Special electromagnet units of continuous current for any assembly and application.

Force: 440 daN - 2,400 daN

Electromagnets are commonly used in industry for holding and handling pieces. They use a DC power supply and are supplied without a transformer or a rectifier. Maximum working temperature: 60º C. Ingress Protection: IP 65

Voltage: 24, 12 V
Force: 8 daN - 520 daN

Electromagnets are commonly used in industry for holding and handling pieces. They use a DC power supply and are supplied without a transformer or a rectifier. Maximum working temperature: 60º C. Ingress Protection: IP 65

For the subjection and manipulation of pieces. Note: when used for lifting, applying a coefficient of 3, ie the traction force should be three times the weight of the piece to raise.

Voltage: 12, 24 V
Stroke: 20, 26, 30, 45 mm

... manufactured by ABTrasmission, are single-coil linear solenoids equipped with a cylindrical electric coil. They have a power supply that ranges from 18 up to 48 A and length from 20 up to 45 mm. These linear solenoids ...

Voltage: 12, 24 V
Stroke: 20, 26, 30, 45 mm

The Double-Coil Linear Solenoids are specifically designed with a modern and robust finish to enhance the device's performance. They are built with a very high pulling force capability which provides a holding function ...

Voltage: 12, 24 V
Stroke: 20, 26, 30, 45 mm

Double-coil linear solenoids, which, besides a high pulling force, offer a holding function with a continuous duty cycle of 100% ED. By means of an OUTSIDE SWITCH, both circuits can be activated by a three-way switch. ...

Solenoids special designed to transform the standard axial stroke in a rotary action. Many sizes and rotary angles both clockwise and undockwise are available for your choice.

Stroke: 0 mm - 60 mm
Force: 0 N - 97.9 N

With their enclosure coil design, the tubular solenoids offer you high torque in both short and long stroke. More then 6 standard models guarantee a wide range of solutions.

Stroke: 0 mm - 14 mm
Force: 0 N - 60 N

... special open frame solenoids, are designed with a built in permanent magnet that allow the latching action, specially helpful in lock and safety devises, even with no voltage. *The rise of the coil and ambient temperature, ...

Force: 220 N - 8,000 N

... pipes, tubes, profiles and scrap parts. Characteristics For small objects Max. lifting power: up to 400 kg Electromagnet Switching: electric Application Electromagnetic bar magnets are suitable for ...

Force: 40 N - 3,400 N

... For small objects up to 10 mm thick Max. lifting power: up to 170 kg Electromagnet Switching: electric Application The holding field of round holding electromagnets penetrates less deeply, ...

Voltage: 240, 24, 12 V
Force: 1,677 N

Energise to Hold Electromagnets / standard Electromagnets / standard Solenoids Solenoid/Electromagnet Electrical current is required to turn the magnet ON. Power is ...

Voltage: 5 V

With this tool Niryo One can easily pick and place very small metallic pieces (multiple ones can be picked at the same time), which is very hard with any gripper, because grasping such pieces is not practical.

Voltage: 16 V - 44 V
Stroke: 1 mm - 3.8 mm
Force: 2.7 N - 177.9 N

Moog's standard Iinear solenoids offer a new solution with improved performance. With a legacy of designing and manufacturing solenoids for rugged aerospace and defense projects, Moog has taken that leading-edge ...

Voltage: 12 V - 24 V
Stroke: 0 mm - 20 mm

Electromagnet type 36 industrial diesel engines and motion sector in general Power supply =12-24 Vdc - others Traction/thrust Type 136 single coil ED duty = intermittent Type C36 and CI36 double coil: •pull ...

Voltage: 12 V - 220 V

Solenoids - Single-acting solenoid Solenoids are designed to work in either a drawing or pushing fashion. Return is usually carried out by external forces. We have the right solution ...

Stroke: 30 mm - 70 mm
Force: 1.3 kN

The Electromagnet is holding solenoids developed by Sirai. It is mainly constructed to operate in DC. The unit is built based on a rugged body in galvanized steel. It allows external diameters ranging ...

Voltage: 110, 24, 220 V

... AC: 5,6 VA (inrush) Standard frequencies AC 50 - 60 Hz Voltage tolerance ± 10% of rated voltage Coil insulation class H Solenoid rating 100% ED Electrical connection Fit for connector to DIN 46244 standard See chapter ...

Voltage: 5 V - 24 V

Delta solenoid offer varied voltage range and different kind of power rating also available. Delta solenoid can associate customer solve the mechanism problem effectively, shorten the design cycle time ...

Voltage: 12 V - 240 V

TO DIN 46244 COILS FOR SOLENOID VALVES Coils manufactured by M&M International are designed for continuous duty in conformity to the EN60730 safety standars. They are encapsulated in a self-extinguishing synthetic material ...

Voltage: 48, 24 V

- EN 1155 Certified - All the fire door holder magnets include articulated and fix armature plate - HRV High Resistance to Vandalism models made in cast metal - 20Kg or 50Kg holding force models - Reliable, no mechanical part - Fail safe - ...