|
|
|
|
|
|
Comprehensive range of high corrosion resistance coatings:
GALVA FLASH
A high aluminium content cold galvanising spray with exceptional brilliance. Appearance of molten zinc that has been treated in a hot-dip galvanisation bath. Ideal for weld retouching and protection. Smooth, uniform, drip-dry film.
GALVA BRILLANT
A zinc/aluminum content cold galvanising spray designed for the retouching of metal parts.
GALVA MAT
A high zinc content cold galvanising spray for metal components requiring a permanent anti-corrosion coating.
GALVA POWER
A zinc/aluminum content cold galvanising spray designed for the retouching of metal parts. Powerful spray specially designed for low temperatures (-10°C).
GALVA MAT EN POT
A very pure zinc coating for a long life protection.
GALVA MAT TRIPLE PROTECTION
New concept 3 in 1. The last word in cold galvanising subdues, replaces zinc coating (resists more than 3000 hours according to ASTM B-117 test).
GALVA BRILLANT TRIPLE PROTECTION
New concept 3 in 1. The last word in cold galvanising subdues. Aluminum brilliance.
GALVA SPRAY ECLAIR
Exceptional brilliance. Appearance of molten zinc that has been treated in a hot-dip galvanisation bath. Extra quick drying. Ideal for weld retouching and protection. Smooth, uniform, drip-dry film. Excellent covering power.
|
|
|
|
|
|
GRAY ANTICO
Rust-proof primary education with fast covering of gray color (RAL 7040) prepares the support before finish-up paint.
Effective anti-corrosive agent, it is applicable on any form of mediums, even on rusted surfaces. Extremely resistant and adapted to the clear finish-up paints.
Aerosol 650ml. Réf.005871. Exist in red (RAL 3009).
CUIVRO JELT
Coating of protection containing very pure copper powder. Form a flexible and resistant film. Facilitate thermoelectric welding. High conductivity. Good behavior with corrosion and the stripe. Protect the elements of body, metal frames, pipings, drains, boilers, medical, plumbing, boiler making. Drying in 30 minutes. Esthetic completion.
Aerosol 650ml. Réf.005881.
GALVINOX
Powerful agent of protection containing synthetic resin and iron oxide. Form a flexible film equipped with an excellent anti-corrosive resistance and a great durability. It makes it possible to protect the various elements from body (sheets) against the external aggressions. Ideal to cover the turned blue weldings of the stainless steel or to improve any steel part.
Aerosol 650ml. Réf.005891.
VARNISHED PROTECTION METAL
Transparent protection long life which is appropriate for metals. Very great abrasive resistant and with the difficult climates. Form a hard film and anti-humidity and anti-corrosive brilliance. Fast drying. Aerosol 650ml. Réf.005921.
|
|
CLEAN-setral-AN/U - Multi-purpose high-performance cleaner for industry and work-shops.
For residue-free basic cleaning prior to relubrication of maschine components. Removal of grease, oil, resin, dirt and remains of sealings. Product should not be used under electric potential. Product should evaporate completely, as otherwise fire risk exists.
Advantages:
* Cleans quickly and thoroughly
* Leaves no residue
* Economical in use
* Free from chlorinated hydrocarbons
|
|
|
|
|
|
GALVA spray can is a zinc galvanizer high temperature.
It is recommended for a durable protection of all metal parts, ferrous
or alloys type. Contains Zinc to 99,99 % of purity . Ensure coatings with
constant thickness, with a homogeneous aspect and brilliance. Film
being characterized by the great quality of its aspect. This galvanizer
resists temperatures of 550 °C, without degrading itself; this
characteristic allows to the user any employment on body subjected to
very strong temperatures. Moreover, coating carried out is weldable (except under argon).
This galvanizer used cold offers many advantages:
- galvanic protection, with principle of oxydoreduction obtained to 100 %.
- Protection against thermal, but also chemical corrosion.
- Film carried out, without run-out, extra thickness, not degrading itself at the time of applications on screwed assemblies.
- Very big covering capacity, except dust quickly, allowing an application on all types of sites.
- Finished perfect, brilliant aspect.
- After total polymerization (24 hours with 25 °C), paintable, with all types of paintings.
|
|
- Electra Clean Spray: Ideal for electrical and electronic fine parts. Cleans and degreases delicate mechanisms. Removes light greases, oils, dirt and organic soils. Quick evaporation. Safe to use on most surfaces. Non conductive. Fast penetration. Superior wetting action. No rinsing and no residue. NSF K2 Registered
- Foam Cleaner Spray: Foaming action - pleasant and economical to use. Ideal for all non-porous surfaces. NSF A1 Registered
- Industrial Cleaner Rapid Dry: Multi purpose cleaner. Fast evaporation. Safe on metals, most plastics and paints
- Heavy Duty Cleaner: Lifts grease and grime so that the resulting residue can be easily removed.
|
|
Heavy-duty performance
Power blast spray
Nonflammable
Nonchlorinated
Nonconductive
Fast Evaporating
No rinsing
No residue
Safe on Most metals (as per MIL-T-81533A)
NSF registered category C1
|
|
|
|
|
|
WEICON TFT/LCD Screen-Cleaner
The ideal product for the cleaning and care even of sensitive plastic and glass surfaces. It removes dirt, dust, grease and nicotine and cleans carefully without leaving residues.
WEICON Brake Cleaner
WEICON Brake Cleaner is a multi-purpose cleaner especially for the automotive sector. It quickly cleans and degreases metals, glass, ceramics and many plastics without leaving residues.
WEICON Burner Cleaner
WEICON Burner Cleaner is especially formulated to remove grease, oil, soot and other dirt accumulations from burner parts. WEICON Burner Cleaner leaves no residues.
WEICON Cleaner Spray S
WEICON Cleaner Spray S degreases and cleans all metals, ceramics, glass and most plastics.WEICON Cleaner Spray S evaporates quickly and, unlike thinners, cleans without leaving residues.
WEICON Compressed-Air Spray
WEICON Compressed-Air Spray is used where traditional methods of dust clean-up would not work, as on parts of difficult access. It allows to dedust corners and sensible surfaces in a dry and contact-free way.
|
|
MV 200 is a multi purpose solvent with short drying time.
It can be used as metallic and plastic parts degreaser, ink remover in printed graphic arts, adhesives, glues and resins remover, surface preparation before gluing or painting, brake parts cleaner, electrical instruments cleaner.
|
|
DETECT FUITES makes it possible to immediately locate any gas or air leak .
Checking of the sealing of pipings, taps, connections, valves of drains, without stopping their operation.
Usable for all types of gas and compressed air, including nitrogen and CO2. Warning, not to use on pure oxygen.
Detect even the mini-leaks, as well as the leaks under low pressure (7 mbar).
Higher ergonomics: All way product, usable with a capillary for a better precision of application, or with a diffuser '' broad cone '', to quickly check wider surfaces.
Biodegradable, non flammable, nontoxic and non corrosive product.
JELT DETECT FUITES Aerosol 650 ml Ref. 005501
|
|
|
Pure silicone compound. Formulated to maximize release effect when used on molds. Its extreme anti-sticking properties make release quick and complete. Reduces sticking of parts in molds. Used to produce a slick finish which resists dirt. Parteze is highly repellent to oil, water, and is heat resistant. Valuable as a water repellent for most porous surfaces, such as concrete, wood, rubber, linoleum, etc. Use on molds, putty knives, trowels, hand saws, and planes, lawnmower blades, plows,boots, etc. Anywhere extreme anti-sticking properties are useful.
|
|
PLANTOCUT 7F a biodegradable cutting oil, without chlorine. It is appropriate in particular for the operations of machining with frictions tools parts very
important by reducing the wear of the cutting tools. PLANTOCUT 7 F are especially recommended for the operations of tapping and drilling in
outside.
Compatible all metals.
Ecological engine not diffusing dansl' atmosphere.
|
|
The CUTTING OIL ENTIERE is a cutting fluid, containing paraffinic mineral oils, developed for the current operations in machining such boring, milling, turning and undercutting.
General-purpose product, it can be used on non-ferrous metals, mild steels, medium steels and the cast iron.
|
|
for moulds and tools
helps to prevent flaws on orifices and neck joints. It does not contain any heavy metal compounds such as molybdenum disulphide.
ACMOS 40-26
Mould release paste based on graphite and mineral oil for blank moulds with excellent flow and wetting properties on the hot mould. The release paste is suitable for I.S. machines.
ACMOS 48-405
Mould release paste for finished moulds with excellent flow and wetting properties on the hot mould. Clean combustion and low fouling are ensured.
ACMOS 48-141
|
|
Technical sprays for surface and corrosion protection
WEICON Aluminium Sprays
Aluminium pigments of a purity of 99.5% offer excellent corrosion prevention for all metal surfaces combined with a high-temperature resistance.
WEICON Brass Spray
WEICON Brass Spray is a genuine brass coating spray. It is used for the protection and visual enhancement of a wide variety of materials.
WEICON Chrome Silver Spray
WEICON Chrome Silver Spray is a high-brilliance, anticorrosive surface coating. The special formulation and highest purity of the metal pigments employed create an extremely high gloss finish.
WEICON Copper Spray
WEICON Copper Spray is a high-quality metal spray with outstanding weathering resistance and excellent adhesion. Used as a protective and decorative coating, it provides an attractive finish for indoor and outdoor applications.
|
|
ACMOS Special coatings for the glass industry
pour moulages et outils (résistant aux hautes températures)
for chutes (heat resistant)
for rotary blowing machines (heat resistant)
|
|
|
|
see the results for the following category : 
