|
|
Scana Steel Söderfors offers Powder Metallurgy Tool Steel and High Speed Steel.
Advantages with Scana PM Products:
Product Quality:
-Super Clean - Super Toughness.
-Wide range of grades, shapes and sizes.
Sizes:
-Peeled or rough turned:7 - 580 mm diameter
-Milled flat bar and plate:15 x 50 - 95 x 545 mm
-Milled blocks: 700 x 1200 x 4000 mm
Max. weight 5 ton
Hollow sections in different sizes.
Milled blocks are our most economical offer and creates flexibility in your inventory.
|
|
Scana Steel Söderfors offers Powder Metallurgy Tool Steel and High Speed Steel.
Advantages with Scana PM Products:
Product Quality:
-Super Clean - Super Toughness.
-Wide range of grades, shapes and sizes.
Sizes:
-Peeled or rough turned:7 - 580 mm diameter
-Milled flat bar and plate:15 x 50 - 95 x 545 mm
-Milled blocks: 700 x 1200 x 4000 mm
Max. weight 5 ton
Hollow sections in different sizes.
Milled blocks are our most economical offer and creates flexibility in your inventory.
|
|
| ... products without technical information |
| |
Manual, sealless tool for mobile applications
- The economical manual solution
- Easy, leightweight (only 3.5 kg), fast
- Flexible use: Medium to heavy packages
- Additional hand tools: see „More information...“
- Hand tool, strap and after-sales service as a total package
- Brochure available under “More information…”
|
|
Manual, sealless tool for mobile applications
• The economical manual solution
• Easy, leightweight (only 3.5 kg), fast
• Flexible use: Medium to heavy packages
• Additional hand tools: see „More information...“
• Hand tool, strap and after-sales service as a total package
• Brochure available under “More information…”
|
|
Low-cost maintenance.
Service-friendly design.
Wearing parts are easy to replace (by operator).
Easy handling.
One of the lightest tools in its performance class.
Fast, secure strap insertion.
Minimal effort required for tensioning and closing.
|
|
Combination Tools
Combination tools function as tensioners, sealers, and often cutters as well. They save time by eliminating the handling of separate tools. But weighing more than such tools, they should be placed as close as possible to the position where they will be used. Seal-feed combination tools carry a stack of seals in a magazine for fast, easy loading.
|
|
A3H
With its short base plate the A3H is able to strap smaller packages. Thanks to its small dimensions and low weight it is suitable for a wide range of applications. Also supplied with a restrictor valve to permit the stepless regulation of the air supply, and in different tensioning levels (2500 N and 4500 N).
Strap qualities:
Regular duty (Uniflex)
up to 850 N/mm²
Strap dimensions:
9.5 - 20.0 x 0.38 - 0.60 mm
3/8 - ¾ x .015 - .024"
Tension versions:
2500 N, 4500 N
Sealing type:
Sealless
Weight:
8.5 kg / 18.7 lbs
|
|
Combination Tools
Pneumatic seal-feed
Using applied air pressure as a power source, pneumatic seal-feed combination tools quickly and effortlessly tension, seal, and cut the strapping. These tools include the AHP and the AMP.
Pneumatic sealless
Pneumatic sealless combination tools include the SLP and the SPC.
Pneumatic push-type
Pneumatic push-type combination tools, including the PNSC and PRH-Series models, are used with push-type seals on irregular-shaped packages. Air power tensions, seals and cuts the strapping.
|
|
DIMENSIONS
Lenght 350mm - 13.8"
Width 140 mm - 5.5"
Height 170 mm - 6.7"
Weight 4 Kgs - 8.8 lbs
FEEDING
Pressure Range 5.5 -7 bar / 78 -99 psi
Air Consumption 12 L/s - 25 cuft/min
PERFORMANCE
Max Tension Force 3000N - 4500N -6.5bar-92psi
Tensioning Speed 5mt/m 4500N - 7mt/m 3000N
Sealing seal single notch
Joint strength 80% of the breaking strength
|
|
DIMENSIONS
Lenght 430mm - 16.9"
Width 260mm - 10.2"
Height 310mm - 12.2"
Weight 10.3 kgs - 22.6lbs
FEEDING
Pressure Range 5.5 -7 bar / 78 -99 psi
Air Consumption 12 L/s - 25 cuft/min
PERFORMANCE
Max Tension Force 9000N -6.5bar-92psi
Tensioning Speed 6mt/m
Sealing seal double notches
Joint strength 80% of the breaking strength
|
|
DIMENSIONS
Lenght 350 mm - 13.8"
Width 140 mm - 5.5"
Height 260 mm - 10.2"
Weight 4.4 Kgs - 9.7 lbs
PERFORMANCE
Max Tension Force 5500 N
Sealing sealless
Joint strength 80% of the breaking strength
Gear ratio 1:18
|
|
Steel strapping tool easy use and adjusting system. Reliable to use in medium / heavy industrial duty applications. Available standard on 16mm (5/8") is also complete with 13mm (1/2") and 19mm(3/4") strap guides included into the box.
For heavy duty applications is also standard the IMA G version equipped by steel made tension lever and rear feedwheel protection
- ERGONOMIC AND MODERN DESIGN
- LIGHT AND COMPACT
- EFFICIENT SEAL
- LOW FORCE TO OPERATE
- EASY TO USE
|
|
Very light and compact strapping tool, easy to use and set. Strong and reliable to use in industrial medium / light applications, is available in different configurations. The standard version is equiped by push button, on domand is also available the choke collar version. Available in four strap sizes: 10mm (3/8"); 13mm(1/2"); 16mm(5/8"); 19mm(3/4")
- MODERN DESIGN
- LIGHT AND ERGONOMIC
- DIFFERENT CONFIGURATIONS
- EASY TO USE
- NEW PNEUMATIC BOSCH MOTORS
|
|
| ... products without technical information |
| |
RSP (Rapid Solidification Process) Tooling uses a system that is able to spray molten steel onto a ceramic negative. While the steel is spraying the ceramic negative must spin and change angle in order to create an even distribution.
Once the spray is complete, a 30lb-40lb steel deposit is left on the ceramic which must be left alone for aproximatly 90 minutes to cool. After that period has passed, the below image is what is left over.
This newly formed pattern will now be sent to the machine shop where it can be cut to fit its designed application.
|
|
|
|
|
|
Beakbane Steel Telescopic Covers are designed to protect machine tool slideways and are precision-built for optimum efficiency. Over the last three decades, Beakbane has developed and refined its design know-how and understanding of the requirements of machine tool builders to the point where it is an acknowledged international leader in its field.
The protection of machine tool slideways is essential if machine tool accuracy is to be maintained, down time reduced, and associated maintenance costs avoided.
By working closely with machine tool builders and adjusting quickly to the demands of the latest technology, Beakbane Steel Telescopic Covers have become an integral part of many machine tool designs. We cannot stress too strongly the importance of the cover requirements being considered at the design stage if maximum efficiency and cost benefits are to be achieved.
Our computerised design programme provides data for the precision manufacture of Beakbane Covers. This ensures instant recall of all information needed for repeat orders: also, as an indication of the precision in our manufacturing procedures, it enables us to replace a damaged ‘box’ in a cover when required.
|
|
|
|
|
|
STANDARD PRODUCTION
• There are many companies throughout the world who manufacture or sell Telescopic Steel Covers. Our company has achieved production levels - in terms of volume and quality standards - that place it at the top of the market.
• Heavy investment in machinery and personnel training, under the guidance of highly qualified engineers have allowed us to face the latest challenge in the development of Machine Tools: the use of high speed linear motors and the increase of the axis speeds.
• The quality of design and manufacture, often with patented shock absorbers, allow us to solve problems resulting from high speeds. At the same time, our company gives utmost consideration to the quality/price ratio, insuring that our customers get the most from their investment.
REPLACEMENT TESCOPIC STEEL COVERS
SHEET-POCKET
• The SHEET-POCKET ™ Telescopic Steel Cover is the most effective solution for shielding the Y-axis (vertical) in horizontal machining centers. It can achieve speeds up to 150 m/min. and accelerations of 2 g. It is supplied in a fully enclosed frame that is independent from the machine structure.
• The self-contained sheet-pocket is easy to install and remove for maintenance or inspection.
• The dimensions are defined by our technicians together with the customer’s engineers to maximize the working area
SQUARE SLIDING COVER
ROUND SLIDING COVER
|
|
|
|
|
|
Telescopic Covers
Using
They represent the traditional form of covering the guide ways, shafts, columns and other sensitive parts of machine tools, which:
- protect the guide ways of machines against swarfs and cutting liquids
- prevent mechanical damage of machine guide ways
- increase the service life of machines
- optically round the overall appearance of the machine
- help prevent accidents.
Features
Owing to the many years of experience and several tens of thousands of covers made, they are characterized by:
- adjusting for high travel speeds
- design for both horizontal and vertical application
- top-class workmanship
- original design adjusted to the advanced technology used by a customer
- high-quality of workmanship and material used
- easy maintenance, long life.
Design
- They are designed, adjusted and made to measure for our customers according to specific parameters and application.
- During designing, the up-to-date technologies of 3D designing in CAD are used.
- For each customer, a solution is prepared and completed within several weeks.
Material
Covers are made of high-quality steel sheet in thickness from 1,5 mm to 3 mm, also in a stainless design.
|
|
|
|
|
|
Telescopic Covers
Using
They represent the traditional form of covering the guide ways, shafts, columns and other sensitive parts of machine tools, which:
- protect the guide ways of machines against swarfs and cutting liquids
- prevent mechanical damage of machine guide ways
- increase the service life of machines
- optically round the overall appearance of the machine
- help prevent accidents.
Features
Owing to the many years of experience and several tens of thousands of covers made, they are characterized by:
- adjusting for high travel speeds
- design for both horizontal and vertical application
- top-class workmanship
- original design adjusted to the advanced technology used by a customer
- high-quality of workmanship and material used
- easy maintenance, long life.
Design
- They are designed, adjusted and made to measure for our customers according to specific parameters and application.
- During designing, the up-to-date technologies of 3D designing in CAD are used.
- For each customer, a solution is prepared and completed within several weeks.
Material
Covers are made of high-quality steel sheet in thickness from 1,5 mm to 3 mm, also in a stainless design.
|
|
| ... products without technical information |
| |
|
The S256 is the first solid carbide end mill developed by Dormer specifically for the machining of Stainless Steels and Exotic Alloys. Adding to their extensive range of high performance, material specific tools, the S256 can be used across a wide range of applications, from roughing to finishing.
|
|
| ... products without technical information |
| |
|
|
