|
|
* Light weight, compact size
* High efficiency, high reliability
* Low ripple noise
* Over load, over voltage, short circuit protection
* 100% 50°C burn-in test
* UL, CSA, CE approved
|
|
|
Unipower Telecom's Radian Series are hot-swappable, modular rectifiers which produce up to 1200 watts output. There are 18 different models with different output voltages and power levels. The modules are ultra-compact with power density up to 17 watts per cubic inch.
|
|
Single output 60 - 360 watts
Plug-in Power Supplies for your 19-inch application.
AC / DC POWER SUPPLY
PRIMARY SWITCHED MODE
SINGLE OUTPUT
P 60 SERIES
– 19" plug-in module
– Wide range input 90 – 264 VAC
– Mains buffering 140 ms
– Power Fail signal
– Output permanent short-circuit proof and SELV according to EN 60950
– Overvoltage protection
|
|
AC/DC Power Supplies for 19-inch
Multiple output 60 - 300 watts
Plug-in Power Supplies for your 19-inch application.
|
|
FN-400-ULX, Power Supply
STANDARD FEATURES
Input 115VAC / 60Hz, 1.45 amp.
12VDC or 24VDC selectable output.
Single Class 2 Rated power limited output.
Input fuse rated @ 3.5 amp/250V.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
AC fail supervision (form C contacts).
Low battery supervision (form C contacts).
Battery presence supervision (form C contacts).
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Maximum charge current .7 amp.
Zero voltage drop when switched over to battery backup.
AC input and DC output LED indicators.
Accommodates up to two (2) 12VDC/7AH batteries.
Power supply, enclosure, cam lock and battery leads.
|
|
Features
- Patents
- Charging voltage modify:3V~160VDC
- Immediately switch to battery-powered after AC power off
- Battery low voltage protection (LVP)
Application
a. All use of the lead-acid battery as backup power supply products
b. All use of UPS function products
Standard / Din Rail Dual Purpose Details
- Accessories Mounting Guide
- RoHS Report
- ISO 9001:2000 TUV Certification
|
|
In the area of suppression modules for contactors, valves and motors, we offer the corresponding components to increase EMC throughout the whole installation. We can meet all normal requirements in the field of power supplies with our power supply units, incorporating primary switching technology and control-power transformers.
Interface technology is represented in the Lutze programme by a wide range of different components that can be used to create just about any interface needed in your application.
|
|
MyPowerSupply is MGV´s individual range for your own special solutions.
Are you currently developing a new appliance or tackling a complex application and just can´t find the right power supply?
We can develop your own special power supply with outputs ranging from 10W to 5kW, offering bespoke design at optimal cost
As a specialist in customised switch-mode power supplies with more than three decades´ expericence, we are proud to have solved every technical challenge to date. Tell us about your operating conditions – and we´ll look after the details.
Benefit from our experience in the fields of:
* Industrial plant and equipment
* Automation and robotics
* Measuring technology and optoelectronics
* Telecommunications and medical engineering
* Studio engineering and transmission systems
* Industrial computers and housing systems
* Renewable energy, incl. wind power and solar technology (photovoltaic)
|
|
|
Powersolve are able to offer modifications to standard products and full custom designs to meet specific customer requirements, consult sales office for details or fill in the Enquiry Form above.
|
|
Zero Up Programmable Power Supplies, 200W/400W/800W
- Constant voltage/constant current
- Built-in RS232 and RS485 interface
- An embedded microprocessor controller
- Digital encoder knob
- Software calibration
- Last setting memory
- Parallel operation (Master/Slave) active current sharing
- External voltage or resistance programming
- Voltage up to 120V, current up to 132A
- Active power factor correction: 99%
- 85~265VAC universal input voltage
- 19" rack mounted ATE and OEM
- Worldwide safety agency approvals
- CD Mark for LVD and EMC Regulations
|
|
|
Operating as a constant voltage power supply, the 105 is very simple to use. The adjustment knob and hi–lo range switch control the output, which is variable in 10-volt increments from 20 to 250 volts. One, two-position switch toggles the bright LED display from indicating output voltage to output current. The 105 is equipped with an over current detector for maximum safety. Like all Thermo products, the 105 is protected by our four-year warranty.
|
|
SM800 - Series
800 W, Bench, Programmable System
DC power supply
NEW
* High quality Power Supplies, designed for long life at full load
* Protected against all overload and short circuit conditions
* Very stable voltage or current 5.10-5 - 10.10-5
* EMC: class B for Generic Emission. Can be used safely near sensitive equipment
* Accurate voltage and current control by 10 turn potentiometers
* Potmeters optionally replaced by digital encoders
* Programmable by Analog voltage, Isolated analog, Ethernet, RS232 or IEEE488
* Sequencer option, for both waveform generation and stand-alone automation
* CE
* High Speed Programming versions available for ATE, Laser Diodes
* 2 Autoranging (AR) versions, doubles voltage and current range
* Power Sink Option: 2 Quadrant operation for PWM motor testing or fast down programming in ATE systems
|
|
|
|
|
|
XHR provides 1000 watts of programmable DC power in a compact half-rack package. It is available in eighteen 1 kW models. Its unique features and size make XHR ideal for OEM applications where high power and wide adjustment of output voltage or current is required, and a compact half-rack configuration is advantageous.
It is stackable with a small foot print, front panel binding post connectors and a low current requirement that allows it to be plugged into a standard 120 VAC, 15 A circuit. State-of-the-art zero voltage or "soft" switching technology virtually eliminates switching transients for high efficiency, low noise and high reliability. XHR is also power-factor-corrected for low current draw (only 11 A at 120 VAC for 1000 watts) and reduced generation of input current harmonics.
The half-rack XHR is ideal as a "companion" for another half-rack instrument in a test system equipment console, eliminating the need for a blank panel while preserving vertical rack space. With a choice of rear and/or front panel connectors, XHR offers added system flexibility.
|
|
|
A range of multi function products specifically designed to suit the requirements of all combined heat and power, co-generation, diesel and gas engine generator applications. This high quality product portfolio offers the generator set manufacturer and panel builder a flexible mix of contemporary and traditional products, including a comprehensive range of generator set controllers, integrated digital power metering, and a one stop solution package of measurement, protection and control instrumentation.
|
|
Model ORION-D4602P
460W+460W mini-redundant switching power supply with active PFC
Mini-redundant power supply suitable for 2U/4U and larger chassis
Active PFC, full-range input
Two independent AC inputs
Model ORION-B3502
350W 2U ATX redundant power supply with active PFC
Low profile power supply, suitable for 2U and node chassis
Dual ATX 12V power connector for dual Intel® Xeon processor based server board, ROBO-8820VG2
Active PFC, full range input
Total output power of +5V, +3.3V and +12V is 328W
Model ORION-A4001
400W 1U ATX power supply with active PFC
Low profile power supply suitable for 1U and node chassis
Active PFC, full-range input
Support for dual Intel® Xeon™ processors
Total output of +5V and +3.3V is 50A
Max. +5V standby output is 2A
|
|
|
Vibra-Metrics designs and manufactures a wide variety of single and multi-channel low noise, portable battery powered accelerometer power supplies, as well as line powered units designed for lab use, rack mount, and a variety of applications. Many connector options are available to insure the flexibility you would expect from V-M products. For specifications click any series number.
|
|
- Input fuse protection
- 100 % thermally protected.
- Floating output, continuously short circuit and open circuit
proof.
|
|
In order to meet demands for complete, comprehensive system solutions, power supplies for mounting rail installation are available in the B&R product line. This extensive spectrum ranges from 2.1 A single-phase up to three-phase power supplies which can supply 40 A. All switching power supplies can manage a wide range of AC and DC input voltages. This input ranges from 100 to 240 VAC or 400 to 500 VAC and from 85 to 375 VDC. Devices are protected against short-circuit, overload, and open-circuit which allows them to be operated without functional limitations or derating even when overloads between 15% and 25% occur.
|
|
In order to meet demands for complete, comprehensive system solutions, power supplies for mounting rail installation are available in the B&R product line. This extensive spectrum ranges from 2.1 A single-phase up to three-phase power supplies which can supply 40 A. All switching power supplies can manage a wide range of AC and DC input voltages. This input ranges from 100 to 240 VAC or 400 to 500 VAC and from 85 to 375 VDC. Devices are protected against short-circuit, overload, and open-circuit which allows them to be operated without functional limitations or derating even when overloads between 15% and 25% occur.
|
|
Performance:
The high-quality design of Comdel's XDC 1000 assures ultra reliability, while the small size fits easily into your system. What's more, with the XDC's flexible options and controls, you don't need to purchase a new power supply every time you make a change in your system. Current and voltage control capabilities are standard with each supply.
Applications:
Comdel's XDC is the ideal supply for reactive PVD sputtering, DC Bias and hard-coating applications.
Features:
Compact, lightweight, 3 1/2" rack-mount DC generator
Accurate output control by voltage or current
Self-limiting circuitry that eliminates short-circuit failures
Low stored energy that reduces arc damage
Front Panel, continuously variable control of output voltage and current
Calculated MTBF: 30,000 hrs. minimum
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power. In addition to the new 10W and 15W, there are also 30W, 60W, 90W, 120W and 240W models available. With all these choices, it’s easy to find the one that’s right for your application!
|
|
PS5R Slim Line models give you all the power of a traditional power supply in only half the space. The NEW 10W and 15W are only 22.5mm wide, the 30W and 60W are 36mm wide, and the 90W is 46mm wide. The 120W unit has a width of only 50mm while the 240W is 80mm wide. They also come with all the convenient features you've come to expect from IDEC.
Utilize them in tight spaces or save valuable DIN Rail space while still filling your requirements for power. In addition to the new 10W and 15W, there are also 30W, 60W, 90W, 120W and 240W models available. With all these choices, it’s easy to find the one that’s right for your application!
|
|
Single Phase Power Supplies
Based on the experience we have built over the past 30 years, we are offering a wide range of power supplies which provide many features to meet customer requirements. We have compact standard Power Supplies and as well versions with display, which provide additional information such as maintenance forecast monitoring, or total run time, both with under-voltage alarm. The slim housing features two under-voltage alarms which indicate lifetime. Last but not least, we offer our modular power supply with multiple configurations and features.
Three Phase
The 3-phase power supplies are available from 120W up to 960W at 24VDC. The key features of this family are the slim and compact housing and its high efficiency. All with natural ventilation.
|
|
|
The MN-2PS40 is an unregulated, linear DC power supply that provides 40VDC to the ControlPoint network. This supply is ruggedly constructed, with de-rated components to ensure long life and reliable operation; built-in fusing prevents damage due to prolonged overloading or short circuits. The extruded case provides various mounting configurations.
|
|
|
With the ability to accept worldwide ac input voltages using eight different ac input cords and worldwide safety agency approvals, the NP family is the top choice in rectifiers. The NP family consists of a wide variety of scalable 48V building blocks including the NP0800, NP1200, NP1500, and NP2500 and a 24V building block, the NP1300. The NP0800, NP1200 and the NP1500 are 2 RU tall, while the NP1300 and the NP12500 are 3 RU tall. The rectifiers and shelf are also NEBS approved. Rapid customization of the rectifiers is possible with the use of Network Protocol Cards (NPC). A complementary shelf is also available that holds up to three modules.
|
|
|
Eaton has an extensive line-up of 24VDC switch mode power supplies to fit almost any application. Available with a variety of features including DIN rail and panel mount, Class 1 Divison 2 ratings, parallel capabilities, and many others. Choose from the basic and inexpensive ELC power supplies, the general purpose & heavy-duty industrial PSG series, or the high current boost (outrush) and feature-rich PSS series.
|
|
In the area of suppression modules for contactors, valves and motors, we offer the corresponding components to increase EMC throughout the whole installation. We can meet all normal requirements in the field of power supplies with our power supply units, incorporating primary switching technology and control-power transformers.
Interface technology is represented in the Lutze programme by a wide range of different components that can be used to create just about any interface needed in your application.
Lütze Power Supply Units: Filtered, single-phase and three-phase; All power supplies carry UL-CSA approval; Layout according to EN 61558-2-6 or EN 61000-3-2 and 3-3; 100% ED at nominal load up to 60ºC.
Lütze Primary Switched Power Supplies: Single-, two- and three-phase; Universal usage thanks to wide-range input 85-550V; Versions for 2-,5-,10-,20- and 40 A, with Power Boost function; Overload or shutdown function; Snap-fit on 35mm DIN rail; PFC.
|
|
|
|
