|
|
The Filter-Master is a mobile mechanical filter designed and ideally suited for use at various welding workplaces and conditions. Built of rigid sheet metal construction and incorporating anti corrosive powder coating; the Filter-Master is designed for every day use. Four heavy duty rubber castors allow ease of movement within the factory and the 3.0 m extraction arm into any desired position. The Filter-Master is the ideal solution to a wide range of extraction problems.
The mechanical filter unit is equipped with a filter insert (filter efficiency > 99.9 %), filter monitor, motor protection with switch and starter, 5.0 m mains cable with plug and complete exhaust arm with hood.
Technical data:
fan performance: 2,200 m3/h
extraction performance at the hood: 1,200 m3/h
motor power: 1.1 kW
voltage: 3 x 400 V / 50 Hz
noise level: 68 dB (A)
filter efficiency: > 99.9 %
weight (without extraction arm): 80 kg
dimensions: 655 x 655 x 1,020 mm
Filter-Master is available as:
Filter-Master with 1 exhaust arm, 2,0 m, Ø 150 mm
Filter-Master with 1 exhaust arm, 3,0 m, Ø 150 mm
Filter-Master with 1 exhaust arm, 4,0 m, Ø 150 mm
|
|
Health protection during welding processes
Welding fumes are classified as potential hazardous substance. The welding dusts and fumes are respriable. Cadmium and nickel are known to cause cancer. Therefore welding fumes have to be captured completely at the source and disposed riskless.
The extraction and filtration units of ULT AG as well as the range of accessories and extraction arms capture the hazardous substances at source and guarantee a high-efficient filtration. |
|
Welding smoke extraction and filter unit including 2 filter cartridges with PTFE membrane (filter effeciency > 99.9%), automatic filter purification by means of rotating
nozzles, compressed air reservoir, connection for external compressed air supply, differential pressure controlled automatic purification, ventilator, dust collecting
container, motor protection switch. The unit includes 1 or 2 exhaust arms and exhaust hood with damper.
Description
ventilator: 3,000 m3/h, motor: 1.5 kW · 3 x 400 V / 50 Hz
cartridge filter unit with 1 exhaust arm, 2.0 m, Ø 150 mm, 3.0 m, Ø 150 mm, 4.0 m, Ø 150 mm
cartridge filter unit with 2 exhaust arms, 2.0 m, Ø 150 mm, 3.0 m, Ø 150 mm, 4.0 m, Ø 150 mm
additional cost for activated charcoal filter
Cartridge filter unit, mobile with rigid metal tube exhaust arm is available on request
All units are available as stationary Cartridge filter units
High vacuum cartridge filter unit, mobile
suction performance: 500 m3/h, max. Vacuum 20,000 Pa, motor: 4.4 kW · 3 x 400 V / 50 Hz
|
|
Mobile cartridge filter with fully-automatic, dust-related deduster via the POWER SPRAY SYSTEM. Comes equipped with a separator and two durable large-surface filter cartridges.
The controls include a post-cleaning function during idle ventilation time. The unit comes supplied with a filter monitor, sealing face lifter, hour-meter, direction display, cable reel and castors with brakes.
Includes cable bearer, 5 m cable and plug. |
|
Micro Air manufactures a complete line of portable collectors. from the M2150 media collector, for light duty or small volume applications to the MC1500 cartridge collector for heavy duty production.
Cartridge units utilize self-cleaning, high efficiency cartridge filters, that reduce filter replacement costs, as the filter elements are continually cleaned by compressed air. All Micro Air cartridge collectors utilize Micro Air's exclusive Roto-Pulse cleaning system. Because this cleaning system cleans the entire surface of the cartridge, it has proven to be far more effective, than the traditional reverse-jet system, thus extending filter life. Cartridge collectors can also be equipped with HEPA filters or Charcoal Modules. |
|
| Mobile welding fume extractor with mechanical (MFD), self-cleaning (MFS) or electrostatic (MFE) filter that can be combined with various extraction arms. Mobile units provide increased flexibility at various work locations and at locations that are not accessible with a fixed installation. |
|
| Welding fume filter systems for almost every type of industrial fume extraction problem. Portable, stationary or/and as central system. |
|
The Smog-Hog PCN mist collector eliminates welding smoke and other metal oxide fumes from employees’ working zones. Situated inside a factory, this portable electrostatic air cleaner can easily move to reach all areas of your factory. This unit is ideal for situations where large hoods are impractical, smoke-producing machinery is used intermittently or an employee moves from one work station to another.
Air volumes range from 700 CFM to 1,200 CFM. |
|
Power:
- 1.1 kW (Model 1.5 HP)
- 2.2 kW (Model 3 HP)
Flow rate:
- 1500 m3/h (Model 1.5 HP)
- 2600 m3/h (Model 3 HP) |
|
| The Euromate SCS filter system is excellent for large-scale industrial use. It is developed especially for removing and filtering harmful substances and vapours released during welding, cutting and grinding processes in the metal industry. The SCS has a filter surface of 150 m2 and is equipped with a self-cleaning filter system for ultra- effective cleaning. Several SCS systems can be easily linked due to the modular construction method. |
|
| Welding fume filter systems for almost every type of industrial fume extraction problem. Portable, stationary or/and as central system. |
|
Extraction and filter unit with fan, automatic filter cleaning depending on loading of dust on filters, Siemens-Simatic-unit control and PTFE membrane filters.
KEMPER extraction systems are suitable for connection to flame cutting tables with laser, plasma or autogen cutting systems. These extraction systems are also suitable for extraction of welding smoke at several work stations by means of stationary units.
Filter classification M and L with filter efficiency of 99,9 % (BIA-classification U, S, G, C).
|
|
| Welding fume filter systems for almost every type of industrial fume extraction problem. Portable, stationary or/and as central system |
|
| Filter systems especially made for the laser industry. Suction systems for laser jobs with i.e.metal, wood, plexiglas and gum (cutting, welding, marking etc.) |
|
| ... products without technical information |
| |
|
|
