|
|
MOBILE WORKSTATIONS WITH ELECTRICAL AND PNEUMATIC INSTALLATION
- 1300 mm long mobile workstations with electrical and pneumatic installation
- Technical features
- Roller shutter cabinets
- Castors
- Electrical and pneumatic installation
- Multi-purpose back panels 1000 mm
- Vices
- Partitioning material
- Components for mobile workstations
- Components for electrical and pneumatic installations
|
|
MODUL 5000 - Attractive and ergonomic
MODUL 5000, is a modular workstation system that is setting new standards with regard to functionality, ergonomy, stability and award-winning design. It can be adjusted for height to suit the operator and the task in hand (either standing or sitting).
On request, MODUL 5000 can also be fitted with a crank mechanism or motor for adjusting the working height. These workstations are used at companies operating multiple shifts and at disabled workshops, for example.
|
|
MODUL 5000 - Attractive and ergonomic
MODUL 5000, is a modular workstation system that is setting new standards with regard to functionality, ergonomy, stability and award-winning design. It can be adjusted for height to suit the operator and the task in hand (either standing or sitting).
On request, MODUL 5000 can also be fitted with a crank mechanism or motor for adjusting the working height. These workstations are used at companies operating multiple shifts and at disabled workshops, for example.
|
|
|
|
|
|
Lefon Sanitary Stainless Steel products are manufactured to industry standards you require. We are building a reputation high on quality and performance for long term relationships. We want to be your supplier for years to come not just for one order.
The Butterfly Valve is high in value yet low in purchase cost and maintenance. A simple ¼ turn opens and closes the valve manually or automatically with one of three actuators. From 1” process lines to 6” process lines we have you covered.
Our Sanitary Seat Valve is patterned after an Industry Standard used in the Food, Dairy, and Beverage Industry for years. If you need to stop the flow or divert this is the sanitary valve of choice. From 1” to 4” these valves offer a sanitary design and very few moving parts.
We are one of the few companies to offer a Sanitary Regulating Valve. Simply turning the handle moves to conical plug closer or further away from the inlet adjusting the flow. The uniquely designed plug also provides complete shut off. Available in 1” to 4” bodies.
LEFON Disc Check Valves keep you going with the flow and prevents reverse flow problems. As pressure builds on the plug face it overcomes the spring pressure allowing product to pass. A spring behind the plug forces the plug closed preventing reverse flow.
When a small sample is required use our 316L sanitary sampling valve. I simple push of the button holds the valve open and a spring returns the valves closed. Available in a variety of end connections.
|
|
- A complete range of adjustable workbenches
- A long lifespan
- A workbench for every application : especially suited
to the electrical and electronic industry.
|
|
MODUL 5000 - Attractive and ergonomic
MODUL 5000, is a modular workstation system that is setting new standards with regard to functionality, ergonomy, stability and award-winning design. It can be adjusted for height to suit the operator and the task in hand (either standing or sitting).
On request, MODUL 5000 can also be fitted with a crank mechanism or motor for adjusting the working height. These workstations are used at companies operating multiple shifts and at disabled workshops, for example.
|
|
MULTI-PURPOSE BACK PANELS 1000 MM
- Multi-purpose back panels 1000 mm
- Technical features
- Support column
- Perforated back panel- plain back panel - shelves
- Carrier arms with slide track
- Pneumatic or electrical set with counteracting spring
- Support runners - winder - multi-purpose support
- Swivel arms with two joints - monitor swivel arms
- Hooks
- Set of hooks
- Philips lamps
- Waldmann lamps
- Multiple socket box
|
|
|
Akro-Mils introduces a new line of work centers. The line includes workbenches and mobile work tables that can be outfitted with Akro-Mils storage bins, hanging systems, and cabinets to create useable, organized work stations. The workbenches and tables are powder coated and are perfect for heavy-duty, industrial applications.
|
|
cubio SYSTEM WORKBENCHES MOBILE
Where's the catch? There is none!
clear-cut design,
a modern colour concept,
consistent system dimensions
precise functions,
high load capacities,
versatile professional applications
uncompromising in robustness,
stability and durability
Stringer
* Extra stability for heavy assembly work
Additional reinforcing bracket
* Optional, enhanced stability for very heavy assembly work
Mobile Version
* 4 swivel castors with full locking brake
* Load capacity 300 kg
* Height adjustable 800 – 1100 mm (excluding worktop)
* With stringer set as standard
|
|
Bin workbench WB031
WxHxD 1500x840x700 mm
6 drawers
door
worktop beech multiplex
galvanised
plastic coated
grey/blue
|
|
|
|
|
|
cubio MOBILE WITH CABINETS
The workbench – the focus of creativity and the source of inspiration for many a successful
idea. For generations young tradespeople have learned their first skills on a workbench.
It is one of the primary acquisitions for any entrepreneur.
No other item of workshop equipment provides such a rich source of creative ideas as
a workbench – be it experimenting, developing, manufacturing, repairing or finishing.
It is no wonder that the workbench is associated with many unforgettable memories, and often is a source of inspiration for successful ideas. cubio workbenches are well aware of this
importance. Consistent functionality, stability and systematic upgrade options make it one of the most dependable adjuncts to your own success story.
Stringer
• Extra stability for heavy assembly work
• Additional reinforcing bracket
• Optional, enhanced stability for very heavy assembly work
• Linoleum board with chipboard core, linoleum lining on top and bottom, edges protected by plastic edge banding, Colour: grey
|
|
- Wide variety of accessories provide flexibility for custom layouts.
- Layout and position of accessories may be changed without using tools, allowing your system to evolve with your needs.
- Its robust components make it ideal for industrual applications while its attractive design fits perfectly in office environments.
|
|
|
|
|
|
Workbenches
Cubio workbenches are robust and versatile workstations, with high load capacities and multiple storage options.
Two 40mm thick worktops available:
Multiplex – laminated bi-directionally bonded beech veneer. For general purpose use
Lino – 3mm industrial linoleum top surface over a particle board core. For enhanced resistance to oil and grease
Ergonomic reach-through handle makes low drawers easier to open without stretching
Blocking mechanism as standard – only one drawer can be pulled out at a time
Labelling strips with easy-open transparent cover. Template for consistent labelling downloadable from www.bott-group.com
High strength drawer pan accepts a wide range of dividers, adjustable on a 25mm pitch grid
Wide range of drawer dividing accessories available
100kg UDL 93% extension drawer guides as standard for high load bearing capacity
Cupboard doors are double-walled for high strength; interior wall is Perfo® panelled as standard to maximise storage space.
High quality locking system, optional master key system
Electronic remote locking system option
|
|
EQUIPTO CLOSED LEG BENCHES COMBINE HIGH-EFFICIENCY BENCH FEATURES WITH THE IMPORTANT BENEFITS OF CABINET SPACE. CHOOSE FROM MORE THAN 200 SIZES AND STYLES AND A RANGE OF FEATURES TO MATCH YOUR EXACT NEEDS. RUGGED STRUCTURAL UNIT DESIGNED FOR TOUGH USE WITH THE FLEXIBILITY FOR ADDING ACCESSORIES.
- CUSTOMIZE TO FIT YOUR SPECIFIC NEEDS
- CHOICE OF EQUIPTO VIVID COLORS TO ENHANCE WORK ENVIRONMENT
- KNOCKOUTS IN LEGS PROVIDE FOR SAFE, CONVENIENT ELECTRICAL HOOKUP
- CHOICE OF 6 TOPS AVAILABLE IN 4 LENGTHS
- ROLLER SUSPENSION DRAWERS
- TAPERED LEG DESIGN PROVIDES ATTRACTIVE APPEARANCE
- ALL BENCHES ARE 30" DEEP
- ALL LEGS ARE 34" HIGH
- MORE THAN 200 SIZES & STYLES
|
|
|
|
|
|
The SAM workbenches is a resistant and flexible design thanks to many simple assembly possibilities.the parts made of steel plate are covered with an electrostatic layer made of a high quality epoxy resin which respects the environment while providing a perfect finishing.
2 length; 15000 or 2000 mm.
Two materials are proposed for the worktops( working plane made of laminated beech or solid wood ) and there are 2 different sizes (1500 or 2000mm) for a many practices.
An easy assembly is provided thanks to the conical grips which are inserted in the worktop at the time of the manufacture.
The components are easily attached thanks to the screws delivered with each worktop.
The worktops are delivered pre-drilled to enable to add additional components (draw units)on the right or on the left on a workbench.
HS: worktop made of laminated beech, no joints, non-deformable, many glued layers, waterproof.
BM: Worktop made of solid wood, central layer made of solid wood and double panel of 5 mm thick hard fibreboard, the surface of the worktop is coated with a permanent antistatic layer, abrasion resistance, can resist until 250°c, plywood borders.
1 draw unit with 6 drawers: Steel sheet frame and drawers, ball-bearing draw runners, 85% opening, opening handles with tabs to insert a signal, inside size of drawers: 435x535mm, with central locking.
|
|
|
Mobile, practical and highly versatile. Whether drawer cabinet or workbench - these mobile units can be used anywhere. Safety was a high priority for the development of this product series. The mobile systems made by bott are robustly built, highly loadable and simply indispensable in many respects.
|
|
The Lista workbench is the classic among workplace systems. Owing to its robust design, it will withstand high workloads.
Stand-alone, interlinked or combined with a Lista drawer cabinet. The Lista workbench is a workplace that leaves nothing to be desired. For it can be adapted to all kinds of different needs: Beech or multiplex tops for heavy applications, hard laminate or urphen tops for lighter applications.
With our new Lista Selection product line, a clear-cut choice of our workbenches is available from stock.
|
|
|
Workbenches are great for packaging, assembly, inspection/testing, and countless other uses in factories and warehouses, but sometimes they can be uncomfortable to work at because workers must bend, stoop, or contort to access work. The addition of a Lift-Tool™ eliminates the need for workers to contort to access work.
|
|
Workbench 2 m long with 6 drawers
2000.AB1
- Worktop length : 2 m.
- Worktop width : 750 mm.
- Standard height : 850 mm.
- Colour RAL 9006 grey.
- Complete with one 6-drawer unit :
- 4 x 60 mm + 1 x 130 mm + 1 x 270 mm.
- Supplied with 3 sets of removable partitions for small drawers.
|
|
Mobile workstation /Workbench 5 drawers
Consists of 1 cupboard with lockable door and a fixed shelf and 1 drawer unit with 5 drawers. Drawers are fitted with rigid expansions which allow a 110% pull-out and safety catch, which prevent the drawers from accidentally opening and a cylinder lock which locks all drawers. Worktop of chip board with oak parquet on the top side and fitted with a steel frame. Fitted with 2 fixed castors and 2 swivelling castors Ø 150mm with brakes.
Technical data
Weight: 80 kg
Max. weight capacity evenly distr. load: 200 kg
Max. weight capacity per drawer EDL 35 kg
Inside drawer measurements for 4 drawers:
350 x 415 x 85 mm
Inside drawer measurements for 1 drawer:
350 x 415 x 185 mm
Beige/blue: 35-315-2101
|
|
Moveable bench SAP
Construction as TP. Height adjustment with allen key between 650..900 mm. Swivel castors Ø 100 mm of which two are braked. Lower shelf available separately.
|
|
TPH series
Height adjustment with allen-key between 650...900 . Construction as TP. Workbench with upright profiles and a laminate shelf, depth 310 mm, height adjustment between 1080...1550 mm.
A corner workbench TPH KK can be used with two TPH benches to create a 90 deg. angle setup. This unit consists of a worktop and all necessary components.
|
|
Workmaster C Series workbenches, with their multiple drawer and locker combinations, provide a solid foundation for several worksurface sizes as well as for enhanced functionality in lab or technical environments. They feature the same top-quality materials and manufacturing techniques as provided on our top-of-the-line Dimension 4 workbench workstations.
IAC also offers a wide variety of electrical and mechanical options, including ESD static-safe options, for optimal utilization. These Workmaster workbenches are recommended for technical, laboratory and desk-type applications.
|
|
We have a range of self assemby economy workbenches for the workshop, assembly and electronic production areas.
Available in a choice of sizes and designs to suit various applications and requirements.
|
|
Motorised Single Column Workbench / Workbench
Aluminium column with rigid, zinc coated floor plate
495 x 495 x 8 mm and zinc coated top plate 170 x 250 x 8 mm. Easy height adjustment from 650 to 1050 mm by hand or foot control. Heights stated are without worktop.
Standard motor has a speed of 18 mm/sec unloaded. The column should be bolted to the floor.
Technical data
Weight: 38 kg
Mains connection: 220–240 V, 50 Hz
Motor: 24 VDC
Max weight capacity, evenly distr. load: 200 kg
with foot control
Non ESD: 36-650-0001
with hand control
Non ESD: 36-663-0001
|
|
Modular Workstations
Activities change, requirements change, procedures change. That’s why Elabo developed a workstation series, which could be both extended and modified. Through the use of galvanized struts, lifting tables, for example, can be raised and provided with additional storage space. Additionally, more rooms, or even universal rooms can be outfitted with the same furnishings – without having to give up a particular functionality. For activities that are constantly changing, in addition to the use of versatile workstations we recommend our “mobile service center”. The centers can be set up to integrate measuring devices as well as for cable reel holders or hopper bins.
|
|
Strong Steel tubing structure with two beams under the panel.
500 kg load capacity UDL.
Varnished plywood 30 mm
Light grey melamine shelf 25 mm
Uprights height adjustable every 25 mm.
Plastic caps for floor protection
Blue RAL 5019 epoxy finish
|
|
|
|
|
|
Since 1992 we have developed and produced two different variants of our patented professional solution. In connection with the extensive offer of stop elements, work chucking fixtures, and positioning elements, you can erect very complex and modular devices in a very short time. The breadboard system, the screen lines, and the completely integrated fine scaling system allow both the precise clamping and adjusting, and to repeat the process very often.
Thanks to our most recent innovation, the new positioning - and - clamping - tube, type "PSR", now both the effectiveness and the flexibility of the use of every screen boring of the original Demmeler 3D - clamping - system can be increased to 30 to 50 per cent. The diversity of our referential product of world - renown allows a broad variety of applications: Part of it are structural steel engineering, sheet metal working, robotics, mounting and measuring devices as well as laser welding, laser cutting, the making of prototypes, and body making.
|
|
The TFX6 line has been projected to deal with assembly functions, before or after the testing phase, or to handle testing with more pieces at the same time.
Therefore the TB400 bench gets complemented with a free pallet line which provides for the transfer of the pieces among the stations thus allowing even more manual interventions
Applications
- Gas filters
- Gas regulators
- CO2 Analyzers
- Tank taps
|
|
The Mink Care-System – Support of vulnerable surfaces during assembly
The Mink Care-System consists of countless flexible bristles, which enable the reliable conveyance of vulnerable components.
Due to the many possible bristle heights and bristle diameters it is suitable for a variety of applications. Short and relatively hard bristles for heavy components, soft bristles for very vulnerable surfaces, or high bristles for goods with fittings (i.e. furniture with hinges, bolts or handles).
Advantages:
• No damage from swarf
• Noise reduction
• Simple conversion of assembly workstations
• Universal application
• Partial replacement possible
|
|
|
|
