Semi-automatic circular saw for aluminum
COBRA 352 SX EVO
MEP
- The machine cuts from 45º right to 45º left and the head tilts from 0º to 45º left so as to make inclined cuts.
- Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP.
OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: - the vice closes and the motor starts - the head goes down to execute cut - motor stops - head returns to top position and vice opens.
A FEW FEATURES:
- Display: 16 characters read on two lines so as to visualize technological parameters such as: + number of cuts carried out + cutting time + amperometer + diagnostics and/or caution messages (more than 100) visualized.
- Registration of alarms and events with the possibility to visualize the story of occurred events.
- Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
- The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
- Rotating table mounted on bearing for a smooth and precise rotation.
- Material is clamped by means of two pneumatic vices which can be freely positioned along the longitudinal axis of the material.
- Adjustable mechanical stops at 0º and 45º left/right to position the head quickly.
-
zoom
