Reverse osmosis water purification unit

In some areas, total dissolved solids can be sustained at or below 250 ppm, eliminating pre-treatment measures for effective waterjet operation. However, in areas where the total dissolved solids (TDS) rise more than 250 ppm, an OMAX Reverse Osmosis System can be just the assurance you need to provide clean, pure water to your equipment. • Can remove up to 90% of total dissolved solids in water • Two types of pre-treatment filters: 5-micron and carbon black • Includes a digital total dissolved solids meter for quick visual review • Time clock-initiated water softener system capable of a 10-gpm flow rate with 45,000 grains removed • Two 4” x 40” membranes capable of handling over 4,000 gallons per day at 77 psi Water quality varies depending on location. In some areas, total dissolved solids (TDS) can be sustained at or below250 parts per million (ppm), eliminating pre-treatment measures for effective abrasive waterjet operation. However,in areas where the TDS is in excess of 250 ppm, an OMAX Reverse Osmosis System can provide the assuranceyou need to supply clean, pure water to your high performance abrasive waterjet system. Optimized for waterjetapplications and designed to fit between your incoming water supply and the abrasive waterjet pump, the OMAXReverse Osmosis System works with both OMAX and MAXIEM JetMachining Centers. • Two types of pre-treatment filters: 5-micron and carbon black • Includes a digital total dissolved solids meter for quick visual review • Time clock initiated water softener system capable of a 10 gpmflow rate with 45,000 grains removed