OKS sprays

Size: 500 ml

Residue-free evaporating universal cleaner for cleaning machine parts and material surfaces. Areas of application Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning ...

Size: 400 ml

... specifications density (at 20°C): 0.66 g/cm³ Applications Disconnect voltage and shunt electrostatic charge prior to application. Spray on areas to be cleaned until the desired cleanliness is reached. Components ...

Size: 400 ml

... Suitable for acryl-glasses Technical specifications density (at 20°C): 0.92 g/cm³ Applications Shake spray can very well before use. Spray evenly onto the surface from 20–30 cm distance. After ...

Size: 600 ml

Residue-free evaporating fast cleaner for cleaning machine parts and material surfaces. Areas of application Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Removal of aged and gummy oil and grease residues, ...

Size: 400 ml

OKS 2671 is a highly-effective cleaner on a solvent basis for use in the food processing industry. Areas of application Cleaning of bearings and machine parts Removal of aged and gummy oil and grease residues Preparation of surfaces ...

Size: 400 ml

... and aromatic solvents Technical specifications density (at 20°C): 0.85 g/cm³ Applications Shake can well before use. Spray onto the surfaces to be cleaned and, depending on the degree of soiling, allow it to react ...

Size: 400 ml

... thoroughly before use. Apply in an evenly thin film to the prepared surfaces, preferably by spraying or dipping, in individual cases also by brush. Shake OKS 2101 well and spray on evenly. Avoid local ...

Size: 400 ml

... before coating Technical specifications lower operating temperature: -40 °C upper operating temperature: 70 °C salt spray test: > 1,000 h (layer thickness 50 µm) optimal layer thickness: > 10 µm (DIN 50 982-2) Applications For ...

Size: 400 ml

... electrical conductivity Decorative corrosion protection on the basis of zinc and aluminium powder as a second layer over zinc sprays (e.g. OKS 2511) for forming a weather-resistant surface with aluminium gloss. Areas ...

Size: 400 ml

... mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. The surfaces must be metallic bright and dry. Shake well before use. Spray a thin layer evenly from 20 - 30 cm distance to the prepared surface. Drying conditions ...