- Metrology - Laboratory >
- Analytical Instrumentation >
- Gas sensors
Gas sensors
HummBox H2S is a connected H2S (hydrogen sulfide) sensor, with Sigfox or Lora, self powered, to monitor odours issues. H2S Cells are interchangeable. H2S ppb sensor • - Precision : ±8 ppb (RMS) • - Resolution : 0,68 ppb • - Functional ...
Greencityzen
The DF320 visibility sensor uses forward scattering to measure visibility. It is used to measure synoptic visibility (Meteorological Optical Range) up to 70 km) and aeronautical visibility. Used in combination with a LU320 luminancemeter, ...
DEGREANE HORIZON
The AADI Oxygen optode was the first and only to measure dissolved oxygen for years without drift - now it is one of the fastest! The Oxygen optode is designed to measure absolute oxygen concentration and % saturation. The optode ...
The AMI model 65 is the ideal solution for measuring oxygen in non-flammable gases in a general purpose environment. In a very small size, and at very low cost, it provides a basic electronic package with a single range voltage output ...
Advanced Micro Instruments
TS4000H - H2S Electrochemical Gas Detector The Model TS4000H Intelligent Toxic Gas Detector continuously monitors hydrogen sulfide (H2S) in several ppm ranges, delivering highly accurate detection and protection. The unit features one ...
General Monitors
CO Sensor - IP55 Microprocessor probe to detect TOXIC GASES, such as carbon monoxide, with self-diagnosis. It is used when the maximum allowed 300ppm CO concentration is exceeded, or rather in case low but damaging concentrations 30ppm ...
These probes have built-in transmitters and are powered by low voltage supplies. They are intended for environmental monitoring. The 525 has a Standard Probe type sensor and will operate with a supply voltage as low as 5.5 V. Its output ...
HL103 Pocket Dissolved Oxygen Meter A simple pocket dissolved oxygen meter using an industry-standard polarographic DO probe, offering 1 or 2 point calibration using air-saturated water or zero oxygen solution. Automatic temperature ...
The chlodi::lyser is an amperometric sensor for monitoring chlorine dioxide. It is ideal for all kinds of water treatment and produces stable readings even at high fluctuations of pH, temperature and flow. Strong surfactants are tolerated ...
Dear visitor: Aecl is looking for a partnership for Distributor and system integrator. *If you have any query, please contact us by Direct Industry or by email contact@aecl.com.tw Aecl AVC-M Indoor Air Quality Transmitter (Multiple ...
Autotronic Enterprise Co., Ltd. (Aecl)
The Microx 4 is a completely stand-alone, portable fiber optic oxygen meter. It can be used with non-invasive sensors & probes (1 mm fiber), and oxygen microsensors (200 µm fiber) in different designs. This oxygen meter is compatible ...
PRESENS
Room sensor for detecting CO2 content and optionally temperature and humidity. The maintenance-free sensor creates the conditions for a pleasant room climate and increased well-being. Typical applications are schools, office buildings, ...
Thermokon Sensortechnik
The CozIR®-LP3 CO₂ sensor uses proprietary solid-state LED technology to achieve unrivalled low-power consumption, making it suitable for a range of applications including battery-powered and wirelessly connected devices. The CozIR®-LP3 ...
Gas Sensing Solutions (GSS)
The oxygen sensor uses luminescence-based optical measurement technology and measures reliably and precisely. The low maintenance and small amount of consumable materials needed by the sensor provide immediate returns on investment. Only ...
The C7233 & C7263 Series Sensors are a stand-alone carbon dioxide (CO2) sensors for use in determining ventilation necessity with HVAC controllers. The C7233 & C7263 Series Sensors are a stand-alone carbon dioxide (CO2) sensors for ...
Honeywell Environmental & Combustion Controls EMEA
Room air quality sensor CO2+VOC with display Note: Not suited for safety-related applications! Technical Specifications Operating voltage AC 24 V, DC 15…35 V Analog output, signal DC 0...5 V, DC 0...10 V, DC 4...20 mA Ambient ...
Erlab air quality sensor. Monitor the air quality in your lab remotely, in real time. Track the quality of the air you are breathing. Erlab air quality sensors monitor the air quality in your laboratory in real time. Available in ...
Measuring range (%): 0.3 % - 25 %
For applications where an oxygen measurement with particular attention to costs is required, a lambda probe derived from the automotive sector is normally used. Ascon Tecnologic has developed a management and conversion board for the ...
Measuring range (ppm): 0 unit - 5,000 unit
Hitachi Energy's CoreSense™ gives continuous online monitoring of transformer gases, such as hydrogen and moisture. CoreSense™ is qualified as TXpert™ Ready Sensor to connect with CoreTec™ 4, the TXpert™ Hub, that monitors hydrogen levels ...
It is essential to provide tunnel or car park users satisfactory air quality. The role of the Opagaz equipment is, using a single device, to permanently check the different toxic gas levels (CO + NO2 or NO) and the opacity. Its all-in-one ...
ORBmax - Residual oxygen meter At the same time, the new measuring method results in greater efficiency and higher quality. The "Optical oxygen measurement via fluorescence extinction" method for welding technology is far superior to ...
The Sensata ResonixTM RGD sensor provides accurate leak detection for HVAC systems leveraging A2L refrigerants - delivering a solution with a 15+ year lifetime. This factory-set sensor designed specifically for UL60335-2-40 delivers fast ...
The multi-pixel gas sensor SGP opens up new possibilities for the measurement of indoor air quality. The long-term stable metal-oxide gas sensor features multiple sensing elements on one chip providing in-depth information on air quality. ...
Main features Exact switching following isochore at all temperatures No contact bouncing Independent, galvanically separated circuits Output signal RS485 / MODBUS Long term drift free output signal About The ...
Trafag AG sensors & controls
Main features • Exact switching output at all temperatures • Fully temperature compensated by design • No contact bouncing • Independent, galvanically separated switching circuits • Suitable for outdoor and indoor applications About Swiss ...
Trafag AG sensors & controls
Main features • Exact switching output at all temperatures • Fully temperature compensated by design • For arctic temperatures down to -60°C • Independent, galvanically separated switching circuits • Accurate and reliable under extreme ...
Trafag AG sensors & controls
AQT-2000 series Our AQT-2000 are designed for measuring the air quality in living and office spaces etc, optionally with 0-10 V or 4-20 mA output.The AQT-2000 has a VOC/mixed gas sensor. The CO2 equivalents are derived from a conforming ...
AQT-2000-Duct series are designed for measuring the air quality in ducts of ventilation systems, optionally with 0-10 V or 4-20 mA output.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining