Other electronic components

CAN bus speed adapter for the COMPACT system. It is used in installations with COMPACT-E units and CAN peripherals (MD-30C, ME-200C, NS-CAN ...), adapting the communication speed of the slave matrix (500 kbit/s) to the communication speed of the peripherals ...

Electronic board of audio substation for SMC intercom system. Includes high sensitivity omnidirectional microphone and 4 W mylar speaker moisture resistant. Supplied with a metal box for electronics and two cable outlets. Power supply 24 V DC. Consumption ...

... Universal PROFIBUS Interface with USB High Speed High performance PROFIBUS USB interface for a wide variety of tasks from network configuration and device parameterization to plant maintenance and production data acquisition. Handy Companion for ...

... Fieldbus ASIC for Field Devices and Hosts Supporting Foundation™ Fieldbus H1 and PROFIBUS PA he UFC100-L2 fieldbus ASIC implements time-critical parts of the Foundation Fieldbus H1 and PROFIBUS PA communication in field devices or hosts. Its advanced ...

... Heat sink paste to protect sensitive electronic components against overheating. Areas of application Protection of sensitive components such as sensors, probes, measuring instruments or semiconductors, such as diodes, transistors thyristors through ...

Quantum III is an independently developed full-constellation, full-frequency high-precision GNSS baseband SoC chip. It is designed with low power consumption and can simultaneously process modern and future signals from all global satellite navigation ...

The WAC502G-L3 is a high-performance, long-distance wireless bridge, designed for fast and reliable connectivity. It features high transmit power and a built-in 15dBi high-gain dual polarization antenna, providing a point-to-point transmission distance ...

... Meter-Bus (M-BUS) is the main bus used for energy metering and intelligent meter management, i.e. separate recording of heat, water, electricity and gas consumption. The Z-MBUS adapter allows us to interface M-BUS networks via RS232 serial port directly ...

Operating range: 12 m

... • 2 beams • Protective field height 510 mm • With plug connector M12 • 2 safety outputs (OSSD) • Installation material is included with the product • • Safe monitoring options for any application • Simple connection with M12 plug connector • Safety ...

Operating range: 12 m

... • Resolution 30 mm • Protective field height 1,060 mm • With plug connector M12 • 2 safety outputs (OSSD) • Installation material is included with the product • • Safe monitoring options for any application • Simple connection with M12 plug connector • ...

Operating range: 12 m

... • Resolution 40 mm • Protective field height 1,060 mm • With plug connector M12 • 2 safety outputs (OSSD) • Installation material is included with the product • • Safe monitoring options for any application • Simple connection with M12 plug connector • ...

... TCR 200 is an economical gap filling material. It offers moderate thermal conductivity and compressibility. It is an ideal solution for cost-sensitive applications. TCR 200 is RoHS compliant, halogen free and electrically non-conductive. It is naturally ...

OP-8100 is a gap filling material suitable for cost sensitive applications. It is electrically non-conductive and offers moderate thermal conductivity and compressibility. The proprietary formulation of OP-8100 is RoHS compliant and halogen-free, providing ...

... OP-8200 is an economical freestanding gap filling material. It offers moderate thermal conductivity and compressibility. It is an ideal solution for cost-sensitive applications. OP-8200 is RoHS compliant and halogen-free, providing extra reassurance ...

... The DTS240 is a type of optical detector. It is capable of detecting weld hold so that the linking weld between the two strips can be located easily. The unit can detect large field. The device provides no interference from ambient light products. The ...

The Optical Barrier V3 from Delta emit visible and modulate laser beam by the diode and reflects is back using the prism reflector position opposite to the sensor. The detected photodiode then creates a signal to the processing electronics. The presence ...

Operating range: 0 m - 100 m

The laser barrier V5 is an optical device that emits laser beam with class 2 visibility. This device has a highly accurate laser that emits beams of diodes along with photo diodes and electronics with a high current output transistor. The diode laser ...

... Electronic speed switch for monitoring overspeed / underspeed and standstill in extreme ambient conditions Up to 4 programmable switches Options: additional incremental output, up to 2 attachments Description The electronic speed switches (overspeed ...

... Electronic speed monitor for overspeed / underspeed and standstill Up to 4 programmable switches Programmable functions: switching range, delay, hysteresis, standstill, direction of rotation Options: up to 2 attachments, additional incremental output Description The ...

... Electronic speed monitor for overspeed / underspeed and standstill Up to 4 programmable switches Options: additional incremental output, isolated ball bearings Description The electronic overspeed switches of the EGS 2 series are ideally suited ...

... Welcome to Fluxtrol’s induction heating production services. Our Fluxtrol team provides two clear production workflows for our customers: Pre-Production Induction Applications - for customers that want to build a new induction heating coil(s) or induction ...

Operating range: 0.1 m - 3 m

... Page summary

• H1: Product selector 长江传感
• Visible page sections/tabs: specification parameters, control output, dimensions, downloads
• Site / Brand: 长江传感

• Product

Operating range: 0.1 m - 3 m

ProductCSP20-T0312DN2-A is a CSP-series safety light curtain for presence detection and access protection in industrial automation.Key featuresType: lightweightDetection distance: 0–2 mDetection principle: through-beam (opposed)Output: NPN NCSupply voltage: ...

Operating range: 0.1 m - 3 m

... Product

• Product name: CSP20-T0312DP2-A
• Series: CSP series light curtains
• Product type: Lightweight
• Detection range: 0–2 m
• Detection principle: Through-beam
• Output type: PNP NC
• Supply voltage:

AX series ac dc power module is a small size, high efficiency switching power supply for customers. This series of power supply module main features as follow: input voltage:110-450vac, output voltage:5v-15v, output power:5w-15w; 3 phase input voltage; ...

Power: 16,500 W
Voltage: 90 V - 456 V

The TPS-BM9016K5TIF bidirectional power module is a high-performance three-phase solution designed for versatile energy conversion, functioning as a Three-phase AC-DC bidirectional module. A standout feature is its ability to operate without neutral line ...

Power: 53,000 W
Voltage: 342 V - 750 V

The TPS-BM75053KTIF bidirectional power module is a high-performance three-phase solution engineered for versatile energy conversion, functioning as a Three-phase AC-DC bidirectional module. A standout feature is its operation without neutral line current, ...

Power: 50,000 W
Voltage: 342 V - 460 V

... Overview
The TPS-BM57050KTIF is a three-phase bidirectional AC-DC power module designed for high-power energy conversion without neutral line current. It uses soft-switching technology to reduce switching losses and improve reliability. The ...

... FEAS Redundancy modules provide the decoupling of two identical DC-Powersupplies in order to either increase the output power or achive a higher degree of system stability. In case of mains power failure or an internal defect of one power supply, the ...

... FEAS Redundancy modules provide the decoupling of two identical DC-Powersupplies in order to either increase the output power or achive a higher degree of system stability. In case of mains power failure or an internal defect of one power supply, the ...

Frequency: 0 Hz
Voltage: 24 V
Primary current: 4 A

... EMC filter / DC voltage filter / for DC networks / 24VDC / 4.0 A Filters of the SFK12-4S2124 series are used to suppress circuit-bound interferences in DC supply lines or DC control lines with a voltage of 24VDC. Interference pulses or interference ...

... The MSC-N2 module is a high-performance measurement center in a 1-module housing: - Measurements: The measurement center allows measuring 1 three-phase circuit or 3 single-phase circuits. ➞ Current measurement: via Enerclip current transformers with RJ12 ...

... Compact and efficient, the MSC-M4 energy measurement module allows for comprehensive analysis of a three-phase/four-wire circuit or three single-phase circuits: - **Main Features:** - Auxiliary power supply: 80 to 270V AC/DC. - Connection of 3 Enerclip ...

... Redundancy modules are installed in electrical panels to ensure the reliability of DC power supply to electrical devices. - Electrical: 2 inputs 0-20A and 1 output 0-20A. Max current 30A for 5s. Input and output voltages: 24VDC or 48VDC depending on ...

... Overview
Since 2010 ds automation operates a complete production line for electronic assemblies and devices. The production setup and competencies are optimized for prototyping and small-to-medium series. Services cover development support, ...

The 868MHz LORA module is designed for wireless communication and can be controlled via an SPI interface. It is compatible with Arduino and is based on the Semtech SX1276 component, which is known for its long-range and low-power wireless communication ...

The RC-WLE5-434 is an ultra low power, long range wireless module designed by RadioControlli. This module is based on the STM32WLE5JC device from STMicroelectronics and operates at a frequency of 433MHz. It is ideal for applications requiring long-range ...

The 433MHz LORA module is designed for wireless communication and can be controlled via an SPI interface. It is compatible with Arduino and is based on the Semtech SX1278 component, making it suitable for a wide range of IoT and wireless data transmission ...

Frequency: 50, 60 Hz
Voltage: 3 kV - 35 kV

... • THDi meet IEEE519 limitation, IEC 62271, NEMA
• ISO 9001, KEMA, CESI, CE, TUV, UL, ASTA
• Seismic design, ETGI-1.020, IEEE Std 693, NCh2369
• Structural design, ASTM A325, ANSI/AISC 360, AWS D1.1
• High altitude correction per IEC 62271 ...

The MIAP2200S-1N2-T is a wall-mounted industrial wireless client designed for robust industrial communication network applications. It features a 1-port 100Gb WAN/LAN port, a versatile RS232/485/422 serial port, and a 2.4GHz antenna interface, enabling ...

Nominal diameter: 12 mm
Power: 12 W

... Small size ferrite driver unit usable for applications where it is necessary reduced overall dimensions, suitable for horn speakers, alarm sirens and burglar alarms. Some of its unique features are: IMPEDANCE: 4-8-16 Ω PHC (Power Handling Capacity): ...

Nominal diameter: 12 mm
Power: 15 W

... Ferrite transducer suitable for medium-power horn speakers, alarm siren and burglar alarms. Some of its unique features are: IMPEDANCE: 4-8-16 Ω RESONANCE FREQUENCY: 1500 Hz DIAPHRAGM MATERIAL: PHENOLIC VOICE COIL DIMENSION: ø25,4 mm MAGNET ...

Nominal diameter: 14 mm
Power: 30 W

... Ferrite transducer suitable for high-power horn speakers and alarm sirens. A powerful driver used worldwide in applications requiring reliable, efficient output. Our driver can be found in emergency and commercial vehicles, public announcement applications ...

... Multiport USB-C 5-in-1 adapter To connect Tab-Ex® 03 to a compatible screen (with HDMI jack). Application / usage - ATEX zone ...

... Rugged USB-C Ethernet Adapter for TAB-EX® 02/03 / PRO (DZ2 / D2) and PAD-EX® 01 (DZ2 / D2). Note (only for PAD-EX® 01 P8): A USB-A adapter (plug) to additional USB-C (plug) is required. Warranty - 2¨ Application / usage - ATEX zone ...

Thermal pad(Thermally conductive silicone Pad) combine high thermal conductivity with specific organic properties of heat resistance and electrical insulation. Thanks to that, thermal pad effectively transfer heat to heat sinks or outer space from heat ...

Operating range: 150 mm - 1,800 mm

... Self-check function/dustproof and waterproof/easy to use Product characteristics ◦ CE safety Level 2 certification; ◦ Complete specifications, easy installation, simple wiring; ◦ Perfect self-test function; ...

Operating range: 150 mm - 1,800 mm

... Self-check function/dustproof and waterproof/easy to use Product characteristics ◦ CE safety Level 4 certification; ◦ Complete specifications, easy installation, simple wiring; ◦ Perfect self-test function; ...

Operating range: 150 mm - 1,800 mm

... Self-check function/dustproof and waterproof/easy to use Product characteristics ◦ CE safety Level 4 certification; ◦ Complete specifications, easy installation, simple wiring; ◦ Perfect self-test function; ...

Frequency: 50 Hz
Voltage: 380 V
Primary current: 188 A

... Sikes passive harmonic filter is designed for almost any kind of electronic applications with six pulse front end rectifiers . The filter can efficiently reduce the harmonic current distortion to required level. Typical application:non-linear three-phase ...

Frequency: 50 Hz
Voltage: 400 V
Primary current: 100 A

... EMI/EMC filter dedicated for Rail and transportation . The train electrical system is very complex with many big power electrical devices resulting in severe electromagnetic interference . This products is specially designed for railway system with precious ...

Frequency: 50 Hz
Voltage: 400 V
Primary current: 10 A

... Optimize harmonic performance Advanced Harmonic Filter PHF 005/010 is a cost-effective total solution. Compared to traditional harmonic trap filters PHF offers a smaller foot print and higher harmonic reduction. The solution is available in two variants, ...