- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Other flow, pressure and level measurement equipment
Other flow, pressure and level measurement equipment
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Domestic use/for biogas BF-2000 Residential Gas Meter is a prepayment gas meter embedded with CUBIC’s ultrasonic gas module which have self-owned intellectual property. It is suitable to be used in community biogas projects that supplying ...
Electro-pneumatic signal converters are the link between the control rooms and pneumatic actuators. I/P converters are available with and without booster stage. The I/P converter with various housing is available for cabinet installation, ...
The battery or mains powered SITRANS FUE950 is a universal custody transfer approved energy calculator. It is designed for use in hot water, chilled water and cooling/heating applications. The calculator has a modular construction which ...
Siemens Process Instrumentation
Frequency: 44 kHz
Distance range: 0.3 m - 8 m
Echomax® XRS-5 ultrasonic transducer provides reliable, continuous level monitoring of liquids and slurries in narrow lift stations/ wet wells, flumes, weirs and filter beds using a beam angle of just 10° and a CSM rubber face. The XRS-5 ...
Siemens Process Instrumentation
Frequency: 30 kHz - 44 kHz
Distance range: 0.3 m - 30 m
Echomax® XPS transducers use ultrasonic technology to measure level in a wide range of liquids and solids. The transducers can be fully immersed, are resistant to steam and corrosive chemicals, and can be installed without flanges. The ...
Siemens Process Instrumentation
Averaging pitot tube with multiple impact-sensing ports • Low pressure loss design; from basic to engineered solutions • Cryogenic to high temperatures possible (-200…+1000°C / -328…1832°F); max. 160 bar / 2320.1 psi • For line sizes ...
OPTIBAR PT 2000 Averaging pitot tube with multiple impact-sensing ports* Low pressure loss design; from basic to engineered solutions * Cryogenic to high temperatures possible (-200…+1000°C / -328…1832°F); max. 160 bar / 2320.1 psi * ...
Venturi tube A Venturi tube is an engineered primary flow element for the most efficient and accurate differential pressure (DP) flow measurement. The typical Venturi shape with limited cone angles enable a pressure recovery of up to ...
Miniature Angle Beam Transducers and Wedges are used primarily for testing of weld integrity. Their design allows them to be easily scanned back and forth and provides a short approach distance. Angle beam transducers are single element ...
Evident - Olympus Scientific Solutions
A contact transducer is a single element longitudinal wave transducer intended for use in direct contact with a test piece. Advantages: • All styles are designed for use in rugged industrial environments • Close acoustic impedance ...
Evident - Olympus Scientific Solutions
A replaceable delay line transducer is a single element contact transducer designed specifically for use with a replaceable delay line. Advantages: • Heavily damped transducer combined with the use of a delay line provides excellent ...
Evident - Olympus Scientific Solutions
Vacuum range: 1 mbar - 800 mbar
These devices control the level of vacuum, maintaining it constant at the pre-set value (secondary vacuum), regardless of the network's flow rate and the fluctuations in vacuum level (primary vacuum). They operate by membrane-piston ...
VUOTOTECNICA
Vacuum range: 1 mbar - 980 mbar
Regulators for rough vacuum levels The regulators described in this page are based on the same operation principle as the ones described in the previous page and have the same function. The only difference is that in these ones the minimum ...
VUOTOTECNICA
Vacuum range: 1 mbar - 980 mbar
Vacuum regulators with pneumatic adjustment Vacuum regulators with pneumatic adjustment differ from the previous ones for the way they adjust the vacuum level; in fact, instead of acting manually on the adjustment screw, it is necessary ...
VUOTOTECNICA
Pressure: 15 psi - 10,000 psi
The Ashcroft® 1305D and 1305DH portable deadweight testers are primary pressure standards that include a pressure source for generating precise calibration points. The unit’s built-in shuttle valve provides the means to control the rate ...
Vacuum range: 1 mbar - 1,000 mbar
The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control ...
VACUUBRAND
Vacuum range: 0.001 mbar - 1,000 mbar
Description The VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work down to 10-3 mbar. These packages include the VACUU·SELECT controller with fine vacuum gauge, a chemical-resistant inline ...
VACUUBRAND
Vacuum range: 0.1 mbar - 1,000 mbar
Looking for an intuitive, easy-to-use vacuum controller? VACUUBRAND has introduced the VACUU·SELECT controller - an application-based controller with a touch screen display for all of your lab-scale vacuum processes. The VACUU·SELECT ...
VACUUBRAND
For positive pressure, negative pressure and differential pressure measurement, for gas or air. Features & Benefits: For positive pressure, negative pressure and differential pressure measurement Can be used with gas or ...
Distance range: 500 m
The dB Transducer series from Pulsar Measurement is a range of level sensors for wastewater and industrial environments. Ranging from 3 m (9.8 ft) to 40 m (131.2 ft) all of our ultrasonic level sensors provide a reliable level, volume, ...
Kimo’s AMI 310 measures simultaneous parameters including pressure, temperature (Pt100 and thermocouple), humidity, air quality (CO/CO2), air velocity, airflow (vane probes and hotwire), and tachometry. - Measurement of hygrometry, temperature, ...
Sauermann
Kimo’s MP 210 micromanometer measures pressure, air velocity, airflow, temperature, tachometry, gas leak and carbon monoxide (up to 6 simultaneous measurements). Measurement of pressure, air velocity, and airflow Interchangeable modules Two ...
Sauermann
A pitot tube is a pressure measurement instrument used to measure fluid flow velocity. Kimo offers a wide range of high-quality and accurate Type L Pitot tubes, as per the NF ISO 3966 norm. Accuracy: More than 1%, for a ± 10° alignment ...
Sauermann
Rotork fast response, high flow, compact I/P, E/P, D/P and P/I electro-pneumatic converters have extensive combinations of inputs and outputs, carry standard FM, CSA, ATEX or IECEx agency approvals, and maintain accuracies of up to 0.15%. ...
Vacuum range: 100,000 Pa
・Allows for the adjustment of vacuum line pressure ・Single-sided connection series ・Weight reduced by 20% (Compared with the previous IRV2000 with IRV20 fitting) ・Built-in One-touch fittings ・The pressure gauge and digital pressure switch ...
SMC PNEUMATIC
Frequency: 25, 40 kHz
Branson Transducerized Cleaning Tanks or Immersible Transducers Capacity 2.5, 5, 10, 20, 40, or 50gallons Heater Wattage 500,1000,2000, 3000,5000 Watts - Freeboard ratio of greater than 120% to eliminate diffusion losses - ...
✔ Smart, intuitive measurement programs including HVAC grid measurement as per EN ISO 12599 and ASHRAE 111, PMV/PPD and turbulence as per EN ISO 7730 and ASHRAE 55 ✔ High-precision, location-independent and integrated differential pressure ...
✔ Probes available as an option mean you can measure air humidity, temperature, absolute pressure and dew point in compressed air ✔ Two plug-in probes and 3 radio probes can be attached ✔ Calculates dew point and dew point distance ✔ ...
✔ Measurement of gas flow and static pressure ✔ Measurement menu for pressure drop test including alerts ✔ Simple configuration and determination of volume flow with Pitot tube ✔ Magnetic holder for easy attachment Handy and intelligent: ...
DIN rail Mount Electropneumatic Actuator -Input 0…20mA/4…20mA -Input resistance: 200 Ω -Output: 0,2…1 bar, 3…15 psi -Air flow rate: 2,5 m3/h -Feature: linear, direct or inverse -Precision: better than 0,5% ...
Electro-pneumatic converter for field mounting -Input 0… 20mA/4… 20mA -Input resistance: 200 Ω -Output: 0.2… 1 bar, 3… 15 psi -Air flow: 2.5 m3/h -Feature: linear, direct or inverse -Accuracy: better than ...
Pressure: 0 psi - 30 psi
The PK II floating ball type pneumatic dead weight tester is engineered to offer user-friendly, safe operation. The easy-to-use primary standard provides reliable and accurate pressure measurement in the field, or in a lab. • Accuracy ...
Ametek STC
Pressure: 0 psi - 300 psi
The RK floating ball type pneumatic dead weight tester is engineered to offer user-friendly, safe operation. The easy-to-use primary standard provides reliable and accurate pressure measurement in the field, or in a lab. • Accuracy ...
Ametek STC
Pressure: 0 psi - 3,000 psi
The HydraLite Tester is a primary standard available as a dead weight tester or a gauge. Both feature a re-entrant type measuring piston and cylinder assembly. This design reduces the rate of fluid leakage and increases float time, ...
Ametek STC
Frequency: 3 MHz
•Low cost ultrasonic transducer •Flexible Format •Various housings available •High Bandwidth; Low Q Performance •Low Impedance The NDT1-220K element offers outstanding ultrasonic transducer performance in a low-cost, flexible ...
Our FloTec pitot tubes are used for measuring flow according to the differential pressure principle. The volumetric flow is calculated from the difference between the static pressure and the dynamic pressure using Bernoulli’s principle ...
WIKA Alexander Wiegand SE & Co. KG
Wide variety of applications The design of the flow nozzle is based on Bernoulli's equation and consists of a convergent section with a rounded profile and a cylindrical throat. Due to its rigidity the flow nozzle is dimensionally more ...
WIKA Alexander Wiegand SE & Co. KG
High pressure recovery and low upstream and downstream requirements Venturi tubes are reliable, easy to use and low-maintenance Venturi tubes are particularly suitable for the measurement of clean liquids and gases. The main advantages ...
WIKA Alexander Wiegand SE & Co. KG
Frequency: 40, 38, 80 kHz
Guyson's 'Kerry' branded KST ultrasonic block transducers are designed for applications such as retrofitting to existing cleaning tanks, often used before plating, or incorporation into new machines on an OEM basis. All KST block transducers ...
PDTF Series temperature switch is a factory set sensor for the protection of all types of internal combustion engines, pumps, compressors, gear boxes, hydraulic reservoirs, marine and industrial power plants. Model PDTF will withstand ...
Waterproof handheld device for pressure measurement with 2 sensor connections, analog output and data logger, without sensors General: This handheld instrument is a valuable tool for demanding pressure measurements� Extremely robust ...
New measuring system with new gas pump for greater measuring convenience – can now also be used in rigid packages and packages with low quantities of gas. The filter membrane protects the sensor from suctioning in particles or fluid ...
VAF111 series vacuum gauges are recommended for visually checking the vacuum level for maintenance, monitoring and adjustment purposes. They are mounted, as options, on the GVP modular vacuum pump series, ref. GVO VAF11140. Option: ...
When connected to an electric vacuum pump, the REV series vacuum regulator ensures an accurate and stable vacuum in a system. The user can obtain very fine adjustment thanks to the adjustment knob. Characteristics: . Adjustment precision: ...
Pressure: 0 psi - 30 psi
The PK II floating ball type pneumatic dead weight tester is engineered to offer user-friendly, safe operation. The easy-to-use primary standard provides reliable and accurate pressure measurement in the field, or in a lab. • Accuracy ...
Crystal Engineering
Pressure: 0 psi - 300 psi
The RK floating ball type pneumatic dead weight tester is engineered to offer user-friendly, safe operation. The easy-to-use primary standard provides reliable and accurate pressure measurement in the field, or in a lab. • Accuracy ...
Crystal Engineering
Pressure: 0 psi - 3,000 psi
The HydraLite Tester is a primary standard available as a dead weight tester or a gauge. Both feature a re-entrant type measuring piston and cylinder assembly. This design reduces the rate of fluid leakage and increases float time, ...
Crystal Engineering
GrayWolfs PIT-504 pitot static tube when connected to auto-zeroing differential pressure (ΔP)sensor gives a unique combination that helps in accurate measurement of air velocity/volume airflow over a wide range. A variety of other standard ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining