... Econoclim® is a natural and economical air conditioner that will maintain a good temperature and improve air quality in your production areas. This will protect your production tools and improve quality at work. This air conditioner will provide you ...
Power: 5 kW
Maximum temperature: 0 °C - 45 °C
Flow rate: 0 l/min - 75 l/min
TOOL-TEMP FRANCE
Power: 14 kW
Maximum temperature: 0 °C - 45 °C
Flow rate: 0 l/min - 75 l/min
TOOL-TEMP FRANCE
Power: 28 kW
Maximum temperature: 10 °C - 45 °C
Flow rate: 0 l/min - 145 l/min
TOOL-TEMP FRANCE
... Definition: Rapid cooling for refractory steel laddle, to cool items treated under protective gas, avoiding contact with air. Construction: Metal construction. Ventilator within housing. Closing cover to conduct hot air towards the back. Electricity: ...
Power: 0.2 kW - 3 kW
Maximum temperature: 120 °C
Flow rate: 0.5 m³/s - 5.3 m³/s
... The new oil-air cooler series ACI is an optimised heat exchanger for hydraulic systems. In-house production and intelligent storage of components enable short delivery times. By using axial fan blades of the latest design the noise level is reduced. The ...
Power: 1.1 kW - 2.2 kW
Maximum temperature: 90 °C
Flow rate: 27 l/min - 70 l/min
... •Compact partial flow cooling unit • Designed to improve the availability and reliability of hydraulic systems • Motor pump station and oil air cooler in one device • Autonomous unit which can be operated independently of the main system •Thus, continuous ...
Power: 3 kW - 50 kW
Maximum temperature: 120 °C
Flow rate: 560 m³/h - 3,420 m³/h
... ACM Oil-air cooler for mobile applications The new ACM oil-air cooler series is an optimised heat exchanger for a wide range of hydraulic applications. The 12/24V DC drive enables the use in mobile hydraulic power units, e.g. in agriculture/ forestry, ...
Power: 50 W - 17,600 W
Maximum temperature: -80 °C - 25 °C
Flow rate: 0.72 m³/h - 4.02 m³/h
... Product overview
The LLCP Series are open-bath low-temperature circulating chillers with integrated pump and external loop capability, engineered for controlled cooling of laboratory and process equipment down to model-dependent minimums (up ...
Power: 300 W - 5,000 W
Maximum temperature: -50 °C - 40 °C
Flow rate: 0.6 m³/h - 1.68 m³/h
... Product overview
Compact low-temperature circulating chiller for laboratory and industrial bench applications. Compressor-cooled unit with integrated bath for direct immersion or external circulation. Temperature performance varies by model, ...
... Overview
To protect operator health, purify ambient air with ENGMAR general ventilation networks. Designed to complement extraction systems, each custom-designed network adapts to the workshop layout to remove fume residues and residual particles ...
... Overview
An air handling unit (AHU) treats building air by filtering, heating, cooling, humidifying or dehumidifying according to needs. The AHU supplies fresh ventilation air and extracts polluted air to maintain a healthy indoor environment. ...
Cooling power: 6,210 BTU/h
... ▲Elaborately designed and manufactured with advanced rotary sealed compressor, hydrophilic membrane inner thread and highly efficient heat transmitter and exchanger. ▲Versatile spot cooling in virtually any place such as manufacturing production lines, ...
i-lift Equipment Ltd.
Cooling power: 3,750 BTU/h
... ▲Elaborately designed and manufactured with advanced rotary sealed compressor, hydrophilic membrane inner thread and highly efficient heat transmitter and exchanger. ▲Versatile spot cooling in virtually any place such as manufacturing production lines, ...
i-lift Equipment Ltd.
Cooling power: 8,189 BTU/h
... ▲Elaborately designed and manufactured with advanced rotary sealed compressor, hydrophilic membrane inner thread and highly efficient heat transmitter and exchanger. ▲Versatile spot cooling in virtually any place such as manufacturing production lines, ...
i-lift Equipment Ltd.
Cooling power: 0.38 kW - 5.4 kW
Height: 460 mm - 1,600 mm
Width: 280 mm - 500 mm
... Overview
Side-mounted air conditioners for electrical cabinets and technical rooms.
Key features :
- Standard side-mounted air conditioners, among our best-sellers
- Very easy to install (indoor
EURODIFROID
Cooling power: 2 kW - 20.5 kW
Height: 1,006 mm - 2,350 mm
Width: 402 mm - 1,500 mm
... Overview
Side-mounted custom air conditioners DESIGNED AND MANUFACTURED IN FRANCE by Eurodifroid. These air conditioners cool any type of cabinet or room and are suitable for industrial environments.
Key features
- 100%
EURODIFROID
Cooling power: 6.3 kW - 14.4 kW
Heating power: 1,500 W - 3,000 W
Height: 1,850 mm
... Presentation
Side active cabinet air conditioners CUSTOM-MADE designed and manufactured in France by Eurodifroid. Products intended for cooling cabinets and technical rooms with 100% custom adaptation according to required power and ...
EURODIFROID
In many industrial objects there are emitted dusted gases of high temperature. Mostly it regards glass works, aluminum works, copper works as well as foundries and cement mills where gas temperatures may reach.The filtration process on filtrating bags ...
In many industrial objects there are emitted dusted gases of high temperature. Mostly it regards glass works, aluminum works, copper works as well as foundries and cement mills where gas temperatures may reach.The filtration process on filtrating bags ...
... Explosion Proof Air Conditioners, ATEX Zone 2 Ducted AC Units (can be attached to flexible ducts of varying lengths, optional fresh air intake) Explosion Safety ce ex II 3G ; Ex nC ec ic h IIC T3 Gc (covering all gasgroups IIA/IIB/IIC) Atexxo ...
Atexxo B.V.
Cooling power: 3.5 kW - 14 kW
Heating power: 4 kW - 16 kW
Atexxo Manufacturing, explosion proof air conditioners (ATEX) developed for technical cooling, 24/7 operation and extreme climate conditions. These split units are designed for safe use in zone 2 gas/vapor explosive atmospheres, suitable for all gas groups ...
Atexxo B.V.
Cooling power: 2 kW - 7.1 kW
Heating power: 2.5 kW - 8.2 kW
... ATEX Zone 2, Explosion Proof Split Unit Air Conditioners (Technical cooling/heating, plug and play, pre-filled with R32 or R410A refrigerant) Explosion Safety: ce ex II 3G ; Ex ec ic nC h IIC T3 Gc (ready for all gasgroups IIA/IIB/IIC) Atexxo Manufacturing, ...
Atexxo B.V.
... DanVex DD-FX Air conditioning and heating system – air-to-air heat pump Dehumidifier Ventilation system with fresh air supply and filtration Applications: • Residential homes, apartments, as well as commercial and non-residential premises. ...
DanVex
Cooling power: 5,400 W
Heating power: 5,900 W
Height: 320 mm
... DanVex DD-136 FX is a climate split system that provides: - Comfortable temperature all year round - Optimal humidity 24/7 - Efficient ventilation and air purification - A healthy indoor environment thanks to filtration (G4/F7/H13 HEPA), UV lamp, ...
DanVex
Cooling power: 23,000 W
Heating power: 25,000 W
Height: 600 mm
... DanVex DD-720FX is a climate split system that provides: - Comfortable temperature all year round - Optimal humidity 24/7 - Efficient ventilation and air purification - A healthy indoor environment thanks to filtration (G4/F7/H13 HEPA), UV lamp, ...
DanVex
... Product Details
The evaporative cooler is the ideal system for improving air quality and comfort conditions inside production or commercial facilities. It continuously moves air from the outside to the inside of the building. Before entering, ...
Cooling power: 5,000 W
The ATEX series BKF (IIB) is a mono-mounted mono split antidflag system designed to meet the needs of the most demanding industrial safety environments. Thanks to its ATEX certification, it can be used safely in explosive risk areas. Our ATEX air conditioner ...
Cooling power: 5,000 W
For non-slip wall air conditioners, a cooling system is available to meet different requirements of low, medium and high temperature areas around the world. Outdoor Unit Measurements: Taking TECHNICAL ACTIONS AND Special Controls, perform an explosion-proof, ...
Cooling power: 5,000 W
Height: 245 mm - 390 mm
For non-slip wall air conditioners, a cooling system is available to meet different requirements of low, medium and high temperature areas around the world. Outdoor Unit Measurements: Taking TECHNICAL ACTIONS AND Special Controls, perform an explosion-proof, ...
Power: 25 W - 490 W
Flow rate: 10 m³/h - 500 m³/h
... MIT fan oil coolers are a cooling system that has various usage areas such as hydraulic systems, vehicle engines in the automotive industry, industrial machines, power plants, agricultural areas, construction, aircraft, sea and railway. It is used ...
Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it ...
MET MANN
... FRESC MANN evaporative coolers are ideal for cooling and ventilating industrial spaces up to 250 m². Their basic operating principle is to draw in outside air and pass it through water-dampened panels. Once the air passes through these panels, it cools ...
MET MANN
Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it ...
MET MANN
... The forced ventilation system allows to optimize the cooling of the transformer, limiting the temperature excursions even in case of momentary overloads. Easy and immediate installation on a very wide range of transformers. The aluminum construction ...
TECSYSTEM srl
... The forced ventilation system allows to optimize the cooling of the transformer, limiting the temperature excursions even in case of momentary overloads. Easy and immediate installation on a very wide range of transformers. The aluminum construction ...
TECSYSTEM srl
Power: 40 W
Flow rate: 600 m³/h
The air forced fan cooling system allows the transformer to withstand higher powers than rated ones and to maintain an optimal temperature increasing the safety of the machine. The installation of the fans on machines board is facilitated by the sheet ...
TECSYSTEM srl
Cooling power: 50, 61, 58 W
Heating power: 50, 75, 100 W
Height: 195 mm
... Switch cabinet cooler series Standard The switch cabinet coolers of the “Standard” series are available in three sizes, each with three performance classes. They are characterized by their compact design and very high efficiency and offer excellent performance ...
Dr. Neumann Peltier-Technik GmbH
Cooling power: 124, 106, 118 W
Heating power: 100, 140, 200 W
Height: 268 mm
... Switch cabinet cooler series Standard The switch cabinet coolers of the “Standard” series are available in three sizes, each with three performance classes. They are characterized by their compact design and very high efficiency and offer excellent performance ...
Dr. Neumann Peltier-Technik GmbH
Cooling power: 272, 252, 229 W
Heating power: 400, 280, 200 W
Height: 269 mm
... Switch cabinet cooler series Standard The switch cabinet coolers of the “Standard” series are available in three sizes, each with three performance classes. They are characterized by their compact design and very high efficiency and offer excellent performance ...
Dr. Neumann Peltier-Technik GmbH
The pressurization unit is a fundamental element in the flotation process, that enables to eliminate the dispersed particles of must through an approach based on the introduction into the must to be treated of air micro-bubbles that entangle with suspended ...
... Pressurization unit with batch cycle PFD120 – PFD220 Standard version in AISI304 Stainless Steel composed by: pressurization unit on wheels composed by pre-filter, pressure gauge, centrifugal pump, mechanical system for gas/product mixing, inlet ...
Cooling power: 29 kW
... Split A/C modules A/C modules are available in split technology with remote external partsup to 44kW and for cold water operation (chiller) up to 29kW. The air conditioning module is installed in a housing,which is mounted directly on a server rack. The ...
Brodinger IT-Sicherheitstechnik e.U.
... External parts of the split A/C modules Regular maintenance of the A/C modules including the outdoor parts is a prerequisite for fail-safe operation. ...
Brodinger IT-Sicherheitstechnik e.U.
... A/C modules for server rooms A fail-safe, controlled room temperature is one of the most important things in cata center. Every server needs an adequately dimensioned air conditioning system if the data center is to remain highly available. A proper ...
Brodinger IT-Sicherheitstechnik e.U.
Cooling power: 2 kW - 7 kW
... VKS-VC Compact Type Crane Cabin Coolers VKS Series Crane Cabin Coolers provide air conditioning that cools crane operators' working environments and protects them from humidity. VKS-VC Compact Type Crane Cabin Coolers, a unique model in this series, ...
TMS Industrial Refrigeration
Cooling power: 4.2 kW - 22.6 kW
... VI Series Vertical Inrow Industrial Air Conditioners Industrial facilities require reliable cooling solutions that can withstand harsh environmental conditions. The VI Series Vertical Inrow Industrial Air Conditioners provide a solution specifically ...
TMS Industrial Refrigeration
... Fast Track Cooling Solutions: MAC Series Mobile Cooling Units Has your cooling system malfunctioned? Are you lacking a backup system? Is your existing setup not performing as well as before? Have you been left in a lurch by your cooling system? The ...
TMS Industrial Refrigeration
Air flow: 1,800 m³/h
Power: 347 W
... The UCP Fly Mobile humidifier/cooler combines a centrifugal nebulizer and a fan in a single motor, reducing size, energy consumption, and installation costs. It is mounted on a trolley, making it easily mobile. FIELDS OF APPLICATION In agriculture: ...
FRANCO SRL
Power: 750 W - 1,100 W
PRIMO is an evaporative cooler for large spaces, such as workshops, industrial departments, commercial and residential buildings, agricultural and livestock facilities, etc., which uses the principle of adiabatic cooling. Hot air is drawn from the outside, ...
FRANCO SRL
Air flow: 9,000 m³/h
Power: 815 W
... The UCP centrifugal humidifier is paired with an air circulator mounted on a mobile chassis. The humidifier and circulator are equipped with two separate motors, making their operation extremely flexible. The UF is ideal for all situations requiring ...
FRANCO SRL
Cooling power: 1.5 kW - 25 kW
Our standard range of ATEX explosion proof air conditioners are a modification of the latest models of Samsung. This ATEX outdoor unit, containing an explosion safe inverter heat pump, continuously adapts to the measured and desired temperature. This ...
Ex-Machinery
Cooling power: 2.6 kW - 7.1 kW
Heating power: 3.3 kW - 8 kW
Our ATEX explosion proof wall-mounted air conditioner is specially designed to obtain optimal air distribution. Taking into account the characteristics of the gases or dusts present (Heavier of lighter than air). You can ensure the desired air flow, by ...
Ex-Machinery
Cooling power: 5 kW - 13.4 kW
Heating power: 6 kW - 15.5 kW
Our explosion proof ATEX ceiling cassette air conditioning system is specially designed to fit in a standard ceiling tile and offers inverter technology alongside quiet operation. This lightweight ATEX air conditioner unit makes installation simple. The ...
Ex-Machinery
Flow rate: 4,000, 2,000 l/min
The C 072 model, and the C 076 model are manufactured by Acf, and are air coolers that have a rated purification capacity that ranges from 2,000 l/min up to 4,000 l/min. They are equipped with a pressure gauge, and features a configurable motor speed. ...
Power: 1,500 W
Maximum temperature: -38 °C - 75 °C
Flow rate: 1.6 us gal/min - 4 us gal/min
... What goes around, comes around. Introducing the SP FTS MaxiCool™ Recirculating Chiller, a compact chiller that doesn’t shy away from even the most demanding of workflows. Designed with your needs in mind, the SP FTS MaxiCool features: • Compact and robust ...
SP Scientific Products
Power: 0.37, 0.75 kW
Maximum temperature: 100, 50 °C
Flow rate: 20, 30 l/min
The oil / air coolers of our CC series are autonomous cooling systems with an integrated circulation pump. They work as a separate cooling unit or as a filter cooling unit with an adequate filter. The benefits of such circulation coolers are a constant ...
ASA technology Produktions- und Vertriebs GmbH