Other production machines

The Derrick Fines Recovery System consists of a cluster of 4″ hydrocyclones mounted over a HI-G® Dewatering Machine, high G performance linear motion screening unit. These products are well suited for all applications where performance and dependability ...

... The PLATIT S-MPuls coating unit is a unit specially developed for coating polished surfaces, such as punches, stamps, dies or for coin minting. For defect-free surfaces that meet the highest demands, effective etching is required. Therefore, we use argon ...

... Supply of all technology for self-production of inks for traditional and digital printing. Fully automated solution that enables production of the highest quality and efficiency with consistent time and cost reductions over time. What does the ink ...

This facility is a KF94 quarantine mask assembly facility, and is a facility that produces full automation from fabric supply to finished product discharge.

... Displacement : 52cc Tilling Width : 36cm Tilling Depth : 15-20cm SPECIFICATIONS Model : T52 Engine Type : 1E44F, 2-stroke Displacement : 52cc Power Output : 1.45kW Drive Ratio : 40:1 Tilling Width : 36mm Tilling Depth : 15-20mm Fuel Tank ...

... HWT 700 Supertrac Technical data sheet HWT 700 SupertracBack to Fuel tank capacity1.7 L Gearboxmechanical with single-speed Clutch oil bath multiple-disc clutch Cutting heightadjustable at 1.5 – 3 – 5 - 6 cm Wheels38 cm diameter, Tractor, driving ...

... FLAIL MOWER A versatile, compact machine for cutting efficiently long grass and small scrub. A wide choice of cutting tools make it suitable for fine grass cutting as well as heavy duty application on professional demanding task. This mower capitalizes ...

... The ever-growing demand for insulated panels in building applications is driven by the new energy-saving regulations imposing significant reductions on power consumption, that can be achieved by the thermal insulating properties of the materials used. Sandwich ...

Thorlabs offers a wide range of Galilean type laser beam expanders for use in the UV, visible, and NIR spectral ranges. The VIS and NIR optical beam expander optics have broadband AR coatings to minimize losses due to reflections. The UV optical beam ...

To make use of fuel energy wasted as heat during the combustion process, BorgWarner developed the Organic Rankine Cycle (ORC) waste heat recovery system. Combining multiple technologies such as a heat exchanger within an optimized overall package, the ...

... LCZ’s range of waste heat recovery steam boilers are used for steam production or energy generation using the waste heat from gas turbines, medium speed diesel engines or recovering the waste heat of some industrial processes. The most common design ...

... No more shrinkage PRODUCT RECOVERY REDUCES CONSUMPTION OF WATER, CHEMICALS, AND ENERGY Optimize time It can eliminate product losses in the recovery phase and when emptying the tubing, as well as optimize the time required for the operations. Pigging ...

Width: 80 mm - 900 mm

... automatic single line four fold bag on roll making machine(coreless) This machineis specialized in producing rolling four fold flat bag, single line, roll change automatically, neat winding. Computer control over the entire process; Servo motor ...

For the briquetting of paper and plastic flakes. A hopper enables continuous operation without binder to achieve maximum compaction of the material. Size of the briquettes is variable.

The tilting straightener, a machine conceived to offer the highest quality of sheet straightening. Inside, 15 rollers of which 2 at the entrance and 2 at the exit superimposed, carry out the traction of the sheet. 11 straightening rollers, 5 up and 6 ...

... Model: T-80 Feed: 80L Power: 5KW Product Size: 1160*870*1260mm Product weight: 200KG This equipment is single-type solvent recovery machine, recovery time about 2.5-4 hour. The fourth generation solvent recovery machine, this equipment includes ...

... Single-sided line control and supervision / For product in bulk / Isolator / Loading system / Freeze dryer / External washing units for vials Output max. - 7,200 uph Shelf area - 5.04 m² Shelf dimensions - 800 x 900 mm Nº of shelves - 7 Shelves ...

Rated force: 80, 60 kN
Printing speed: 24,000, 30,000, 42,000, 48,000 p/h

"Miscella" is the industrial term used for the oil/solvent mixture that leavesthe solvent extractor. The miscella leaving the solvent extractor contains70-80% solvent by weight. The purpose of distillation is to thermallyseparate the miscella into two ...

Capacity: 0.8 kg - 800 kg

... Sugar Coating System, Super Coater, Tablet Coater, Film Coating Machine, Pill Coating Machine, Tablet Film Coater, Pharmaceutical Coating Machine Tablet coating machine forms a thin film protective layer on the surface of tablets, protecting drugs ...

... AUTOMATIC BORDERING MACHINE WITH ONE SEWER HEAD Agata 600 The machine has been designed for production of mattress bands and simultaneous application of 3d fabric and/or personalised tapes or any other type of fabric. The maximum sewing height is 60 ...

... It is a machine used to precisely coat seeds with chemical pesticides to protect them from pests, fungus or building materials. It can also perform Product lubrication. Task of Seed Spraying Machine: It is a machine used to precisely coat seeds with ...

The framing machine for opening sashes by TECAUMA achieves a square cut assembly by screws. The main advantage of this machine is the geometric quality of the assembled products, obtained thanks to framing and screwing simultaneous operations, reinforced ...

The FMT-preduster (FPDM) coats products with a thin layer of flour in order to improve batter adhesion. The machine processes different kinds of flour (or fine-graines spices). A clever circulation system collects superfluous coating materials and dust ...

CoverMAK is a multifunctional coating machine that you can use for all your products. Its double-sided structure allows both liquid coating and coating of products such as sesame, coconut and chia seeds at the same time. CoverMAK, which can be used with ...

... The seed treating or dressing equipment (chemical coating), type SBI-1, is made to perfectly achieve essential operation: to coat the seeds with a protective liquid (pickle). Seed treater is suitable for different types of high quality grain, peas, beans, ...

Folding length: 3.2 m - 12.2 m

... The semi-automatic Jorns JB bending machine can be configured in lengths of 3.2 to 12.2 metres and with a bending capacity for sheet metal up to 3 mm. It offers a great deal of freedom – and not only when it comes to the clamping tool. The area in ...

... Production: 140-160 pcs/min Fully automatic Area: 3,500 x 2,500 x 2,000 mm. Surface 8.25 square meters. – High speed six steps one drag mask machine Grinding device system refers to the technology adopted by the manufacturer to keep the material side ...

Coating machine is a specialized piece of equipment used to apply thin layers of material onto a substrate. These coatings can serve a variety of purposes, such as improving the surface properties of the substrate, enhancing its appearance, or providing ...

... Every patch earns you money Patched veneer saves costs and is an ideal replacement for composed core veneer. Patched veneer also has the same technical properties as good face quality veneer. In other words, for the same quality, patching is cheaper ...

The system allows to automatically check the unique characteristics of the key via a camera vision system and obtain the relative cylinders (one or two) complete with the respective pins. The coding is performed with advanced vision technology with dedicated ...

... The ZAF 250 Vario executes the full range of tenons quickly, accurately, efficiently and precisely. For straight or angled tenons, corner or ridge half-lap joints, you can always count on the ZAF 250 Vario Tenoner. To ensure exact length measurements, ...

The process for obtaining aluminium billets or tubes begins with smelting scrap, ingots, etc. Once the metal has been smelted and its chemical composition adjusted, it is cast into billet shapes in the casting machine. The billets then undergo homogenization ...

... I.M.V. PRESSE can build complete and "turn key" press-lines, working together with companies specialised in the various sectors of automation, servo systems and robotics in general. The constant search and selection of the most modern and reliable accessories, ...

... The Profilator H-Type is a horizontal modular system designed for machining of clutch and synchro gears. With the horizontal design, good operation and accessibility of the individual machining systems is reached. Performance All machining is ...

... Single side Spray coating system | Automatic panel loading and unloading with dedicated buffers | Simple maintenance and easy cleaning | Up to 3 heated guns | Low overspray | Excellent gap filling and encapsulation | Special multi-pass SFS function allows ...

... PIT HYDRAULIC CLAMPING MACHINE FOR CHAIR ASSEMBLING with 4 or 5 hydraulic clamping cylinders. With the SI F 4C and SI F 5C clamps you get the final complete assembly of the chair. Some elements, such as the backrest, must first be pre-assembled on ...

Automatic embossing and cut to length lines, tranversal and tilting cut and slitting, complete with systems for blanks handling and stacking . These lines are conceived to emboss aluminium, steel and stainless steel with different thicknesses and widths ...

The ACTE COMPACT-type heat recuperators are at the cutting edge of micro gas turbine recuperator technology. Combining performance, lifetime and compactness, optimising micro gas turbine efficiency becomes easier and sustainable.

... Automatic glove machine FSA 505 with 60T/min Application examples: • Gloves on paper for hair dyes • Protective gloves welded on package insert Seven decades of know-how for a single result: perfect gloves on paper backing. Our showpiece. This ...