- Hydraulics - Pneumatics >
- Pump >
- Pump accessories
Pump accessories
Under-Frame Vacuum Station. It can be connected to a piston syringe or meat mixer. Close the outlet valve tightly, press the button on the station, it removes 85% of the air from the airtight hopper in 90 seconds, open the valve — fill ...
The simplest and most suitable solution for dosing and transferring non-hazardous liquids, PN and KN plunger heads boast special features that offer superior performance. Plunger available with stellite or ceramic coating and precise ...
The All-in-One Pallet Changer and Vacuum Chuck System One Small Investment = Huge Payoffs! In a relatively short amount of time the VM300 has established itself as the vacuum system to which all others are measured. Capabilities include ...
Mitee-Bite is proud to introduce possibly the most universal multi-functional vacuum system in today’s market. This system has several unique features to meet your vacuum workholding needs. Can be powered with our Vacuum Generator ...
Flow rate: 1.5 l/min
Suction pressure: 1 bar
The Vacuum Dehydration Units remove liquid, gas and solid contamination, which are corrosive and contribute to the reduction of machine life. Water, gas and solid particle contamination greatly increase maintenance costs and contribute ...
Flow rate: 8 l/h
Suction pressure: 1 bar
The Vacuum Dehydration Units remove liquid, gas and solid contamination, which are corrosive and contribute to the reduction of machine life. Water, gas and solid particle contamination greatly increase maintenance costs and contribute ...
UIC Vacuum-Systems Vacuum distillation is especially suitable for gentle separation of thermally sensitive substances. The boiling point of the evaporating components is reduced via pressure decrease. This slows down any product damage ...
Flow rate: 5, 10, 40 m³/h
This type of vacuum pump is not adversely affected by air-admittance during the moulding process (‘rough’ vacuum) unlike oil-lubricated pumps which, despite achieving higher levels of vacuum, can vent oil vapour if used in this type of ...
Composite Integration Ltd
Flow rate: 16, 4, 25, 40 m³/h
A range of oil-filled vacuum pumps ideally suited to ‘infusion’ type processes where high level vacuum is required. Reliable and robust oil-filled rotary-vane, air cooled pumps Vacuum levels down to 0.2 mbar absolute Oil mist separator ...
Composite Integration Ltd
Flow rate: 80 m³/h
Rotary-claw type pumps are ideally suited to large scale VRTM processes, combining exceptional toughness, high flow rates and low output noise.This type of vacuum pump is not adversely affected by air-admittance during the moulding process ...
Composite Integration Ltd
Tracked and fixed skids able to perform all the steps of preparation, filtering, transfer and CIP/SIP. Equipped with PLC, HMI and instrumentation able to allow a complete automation and monitoring of the production process. Control ...
• Compact and quiet • Maintenance-free motors • Quick and simplified filter cleaning operations The F series vacuum units are characterised by low noise level, up to 75 dB(A), and compact footprint. The F series vacuum units are ...
Flow: 0.1 m³/h - 110 m³/h
Pressure: 0 bar - 16 bar
Fully automatic package dual-pump system consisting of one duty system and one stand-by system to ensure system redundancy. Design and function as per DIN 14462. Benefits Design to DIN 14462 ensures reliable operation in the ...
KSB
Flow rate: 25 m³/h - 840 m³/h
Suction pressure: 0 mbar - 0.5 mbar
Plug and play The system are provided with a tank, an electrical cabinet with controller and a filter in front of all the pumps – so ready to use. Benefits you can count on Due to the use of our new GVS A oil-sealed vane vacuum pumps, ...
Flat ejector pin, hardened, plasma-nitrided, oxidised flat ejector, Special Flat ejector pin, hardened Flat ejector pin, with corner radius, with DLC coating Flat ejector pin, with two corner radii, with DLC coating Flat ...
End to End Fuel Gas Systems for a variety of applications. BHGE’s TPS business has overall responsibility for engineering, procurement, assembling, calibration, site assistance and maintenance of complete systems, driven by process know-how, ...
Power consumptionkW0.12 Vacuum bar0.85 Frequency Hz50/60
Blade ejectors • Ejector pins • Ejector pins, T.G.R. treated • Core pins of Ampco • Ejector sleeves • Ejector sleeves, stepless
The oil hydraulically driven pressure intensifier is an alternative of the conventional plunger pumps to be used on sewer cleaning vehicles. It is driven by a variable displacement axial piston pump in closed circuit. The oil tank has ...
Tolomatic's intensifier is intended for use with all non-spring retracting hydraulic caliper disc brakes and increases the output pressure to obtain the brake's high torque handling capabilites without the use of high pressure hydraulic ...
Customized Impingement jets mixing skids for Large Production Scale Impingement Jets Mixing (IJM) Skids for high flow production of nanoparticles (LNP, microemulsions, etc.) The Impingement Jets Mixing (IJM) Large Production Scale ...
Standard movable filling Station for Gasoline is a mobile refueling control device. The movable refueling skid is a mobile refueling control device. It's mainly has explosion-proof tanks, tankers, distributors and automatic fire extinguishing ...
Shenzhen Autoware
Flow rate: 9.6, 8 m³/h
Suction pressure: 450 mbar
Compact system for infusing or vacuum bagging smaller composite parts. The Vacmobile HRTS vacuum system is suitable for resin infusing or vacuum bagging small to medium sized parts up to about 5 m² (53.8 ft²) in area, as long as the ...
Vacmobiles.com Limited
Flow rate: 0 m³/h - 800 m³/h
Suction pressure: 0 bar - 15 bar
OCS Oil Sealed Vacuum Unit Oil sealed vacuum unit consisting of a liquid ring pump with closed recirculation of oil through air/oil heat exchanger, fitted with electric cabinet. High performance The physical properties of the sealing ...
GIEFFE SYSTEMS Srl
Compact vacuum systems with total or partial water recirculation Max pressure bar G 1.8 Max flow m³/h 3500
Ideal for fluid transfer applications requiring high accuracy and repeatability What's included: tubing loading key, single-channel mounting hardware, and a 15" (38-cm) length of silicone pump tubing.
Masterflex
Suction rate: 200 m³/h - 1,200 m³/h
AQUASUB is a high-performance hydro-ejector which combines both water aeration and circulation. It is used for the aeration and destratification of lakes, ponds and any other water body. Fast speed Aquasub is designed with a 3000rpm ...
FAIVRE
with Fuel Management System HDA 2. The HDM pro is a professional diesel dispensing station with many innovative features. Description With EC-type examination certificate (MID) Fuel Management System with PC software (2.000 users) Second ...
HORN GmbH & Co. KG TECALEMIT
The RONO batch system is a highly flexible process system made for mixing, dispersing, homogenizing and emulsifying. It can be used for a wide range of food products and finds its main application especially in the production of mayonnaise, ...
RONO Maschinenbau GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining