Other pure metals

... Overview
GTP tungsten chemicals — Ammonium Paratungstate (APT), Ammonium Metatungstate (AMT) and tungsten oxide — are produced from secondary feedstock or virgin tungsten ore concentrates (wolframite, hubnerite, scheelite). Vertical integration ...

Wieland manufactures solid and hollow copper sections in a wide range of sizes. Featuring contours close to the final geometry, these sections help you obtain your finished parts in just a few operations. Together with you, we develop complex sections ...

Thickness: 0.7 mm - 5 mm
Diameter: 9.53 mm - 38.1 mm

... Titanium tubing tubing suitable for environments and applications where the properties of stainless steels are not sufficient. Typical applications include tubing for the aerospace industry and heat-exchangers. Our titanium tubing is available in ...

Carbide rod apply to processing steel,non-ferrous material,heat resistance material and hardened material,etc workpiece.

... used for high grade diamond with gold yellow and high clarity. high inversion rate, intensive grain size particularly at 35/40, 40/45, 45/50. Most are high grade suitable for market demand. ...

Thickness: 3 mm - 1,250 mm
Width: 0.05 mm - 3 mm

The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, ...

From thick to thin sheets, we manufacture tungsten material, a difficult-to-work material, using our rolling know-how. Tungsten, which has the highest melting point among metals, is used for high temperature furnace parts and electrodes. We can also offer ...

Our rolls, manufactured using high-quality and certified materials, have set the standard for cold rolling wire plants all over the world. The manufacturing process, including the sintering of our Eurolls tungsten carbide rolls, takes place entirely in-house. ...

Thickness: 0.15 mm - 0.5 mm
Width: 700 mm - 1,030 mm

... Tinplate • Thickness:0.15-0.5mm • Width:700-1030mm • Length: 601-1200mm • Steel Grade: MR, SPCC • Temper Grade: T1-T5, DR7M-DR9 • Coating Weight: 1.1-11.2(g/m2) for tinning, 80-120mg/m2 for chroming • Surface Finish: B(Bright), R(Stone), S(Silver) • ...

In order to support our clients in the best way, we can supply them with tin alloys for electronic soldering of great variety. In case of need we will indicate all costs related to the marketplace raw material costs, referred to that particular period.

... Surface Engineering’s Carboride Hardfacing products are designed to resist severe abrasion in combination with excellent corrosion resistance, adhesive wear resistance, erosion resistance, and high temperature resistance up to 1100° Fahrenheit. The deposits ...

... Very thin cold-rolled product coated on both sides by a layer of tin. It offers high protection against particles or external agents. Ideal for the manufacturing of packaging for the food industry and for the preservation of chemical element Thin Tin-coated Optimal ...

Thickness: 2, 5, 10, 15, 20 mm

Tungsten has the characteristics of high melting point, high strength and hardness, good performance at high temperature, low resistivity, small expansion coefficient, and small electronic work function; therefore it is the metal material which is most ...

The GCCSEAL series of pure graphite plate material is made from high-purity flake graphite to chemical and high-temperature treatment and mold pressing or rolling, with no adhesives. It is the basic material for manufacturing various graphite sealing ...

RD Series adopts medium grained WC and has achieved a good balance of strength, wear resistance, toughness, and the most excellent versatility. It is used in a wide range of applications, from various wear-resistant tools to blades and machine parts.

6Al-4V titanium is the most widely used of all the alpha-beta titanium alloys. It is typically used in the annealed condition, at service temperatures through 750°F. However it may be heat treated for high strength in sections under 4″ thick. Hardenability ...

... Our proven ultra-fine grain EDM graphite delivers unmatched performance. Now you can confidently handle your most challenging EDM machining operations while saving money! Top-performing DS4, featuring the DarkStar ultra-fine carbon particle, is the result ...

Diameter: 1.2 mm - 18 mm

... Titanium Wire Length: Rod, Spool or Coil Alloy: Grades 1, 2, 3, 4, 5, 9, 12, Ti-6Al-7Nb, Ti-6242, Ti-6246, Special Alloys Specifications: AMS 4951, ASTM B863, ASTM F136, ASTM F67, ASTM F1295, AWS A5.16 (ERTi-2, ERTi-4, ERTi-5, ERTi-23) Approvals: Bombardier ...

Elmet offers a wide range of tungsten plate and tungsten sheet products in varying thicknesses and lengths. As with all of our materials, our sheet begins as metal powder, is pressed into ingots, sintered, and then rolled. The process enables us to tailor ...

... Graphite sheets Hexaflex™ type P1 are manufactured using Hexaflex™ graphite foils followed by further reinforcement with a 0.1 mm (.004″) thick tanged stainless steel (or other alloy) insert to enhance surface load and blow-out safety. We use another ...

Diameter: 0.1 mm - 8 mm

Pure nickel wire has good mechanical strength, corrosion resistance and high heat resistance. It is suitable for making electrical vacuum devices, electronic instrument components, and corrosion resistant materials.

Diameter: 2 mm - 3 mm

... The Aenor alloys are recommended in sanitary facilities, heating and low pressure installations. These alloys are certified by the certified quality control Aenor. Alloy 702 Sn 96,5 Ag 3,5 Melting point 221º - 224º C Formats 100g, 250g, 500g Alloy ...

Medical implants have become an integral part of modern healthcare, allowing patients to lead a normal life despite severe injuries or disabilities. Among the many medical implants available in the market, titanium medical bars have emerged as a game-changer ...

Thickness: 1 mm - 15 mm
Width: 30 mm - 450 mm

... Xi'an Refra Tungsten & Molybdenum Co.,Ltd is one of the best China tungsten plate manufacturers and suppliers, and as a professional company we have our own productive tungsten plate factory, welcome to wholesale products from us. Standard：GB/T3875 ...

It is the material of choice for electrical and microelectronic applications (targets, filaments) because it has both good electrical and thermal conductivity, a high density and a very high melting point. These properties are also necessary to make it ...

... Graphite Electrodes Graphite electrode is widely used in EAF, LRF, submerged arc furnace (producing ferroalloy, pure silicon, yellow phosphorus, calcium carbide,copper etc), resistance furnace (such as the graphitization furnace, glass melting furnace ...

... Excellent erosion resistance and thermal properties. Typical Applications: Grounding rod Electrode Anode ...

Our extruded graphite bipolar plates also exhibit high corrosion resistance to various electrolytes. They impress with good mechanical strength without brittle fracture as well as very good liquid tightness. Another advantage of the thermoplastic material ...

Titanium Plates finds usage as an alloying element in steel making. These are used for reducing grain size and also works as deoxidizer that supports reduction in carbon content as present in steel. Further, it is also used as an alloy with aluminum for ...

... SG Graphite boards Grinded high temperature graphite boards are available in a thickness range from 4 up to 100 mm in a standard format of 1000 x 400 mm. Graphite boards work as structural elements or linings in furnaces and chemical installations, and ...

Diameter: 10 mm - 22 mm

The Titanium alloy tools is die forged making from Titanium alloy materail.Extremely non magnetic,corrosion resistant,lightweight,hard durable,it is the most perfect special tools in aviation,spaceflight,iatrology,magnetic field which can not be replaced ...

... Tungsten carbide strip Advantage of our durable tungsten carbide strips: 1.High hardness after quenching and tempering 2.Excellent wear resistance 3.Excellent hot-work performance 4. Long life for using Performance and application recommended Good ...

Full customized graphite shapes according to the user's specifications can be manufactured by Ibiden and delivered by F-tool. The manufacturer can produce system-oriented electrodes in an electrode holder following the user's visual instructions. The ...

Length: 16,000 mm
Diameter: 3 mm - 450 mm

... Titanium Bar 6Al4V,5Al2.5Sn,3Al2.5V Acree Intl supply Titanium Bars/Rods with different shapes such as round, rectangular and hexangular etc. All Titanium Bars are made from quality Titanium ingots , which are widely applied for aerospace, medical, ...

The MX-TS-TW is a tungsten wire replacement spool designed specifically for use with the MX-TS tissue slicer frame winder assembly. This spool contains 1000 feet of tungsten wire, making it suitable for extended laboratory use and ensuring consistent ...

... Grounded carbide rods 50/100 mm. This product can be customized according to specific customer requirements. ...

... ø4 insert now available. Excellent cost performance even with ultra-small diameter boring! ...