Other waste treatment equipment

562 companies | 1,734 products
centrifugal classifier
centrifugal classifier
CFS

Filtration size: 10 µm - 250 µm

At the point when a screening machine cannot be utilized to independent fine powder because of the wanted last fineness or other item aspects, this standard ultra-fine classifier CFS can. This device's yielding capability are accomplished ...

See the other products
NETZSCH Grinding & Dispersing
centrifugal classifier
centrifugal classifier
CFS/HD-S

Width: 380 mm - 2,500 mm
Filtration size: 2.6 µm - 60 µm

The CFS/HD-S by Netzsch Grinding & Dispersing is an Air separator which is designed for ultra-fine and sharp separation. This tool can be used with conjunction in grinding plants. The unit uses a classifier wheel geometry which gives ...

See the other products
NETZSCH Grinding & Dispersing
centrifugal classifier
centrifugal classifier
CFS 5, CFS 8

Filtration size: 20 µm - 150 µm

This device can produce an effective fine grouping with successful results and sharp partition for coarse grain division and also item dedusting. The CFS 5 and CFS 8 are successful lab classifiers for the dry detachment of little measures ...

See the other products
NETZSCH Grinding & Dispersing
hydrocarbon skimmer
hydrocarbon skimmer
MINI-MAX

The unique MINI-MAX is a self-adjusting weir skimmer that is capable of recovering a wide range of oils and products floating on the water surface. It is ideal for small industrial separators, tanks and waters. This skimmer can be coupled ...

See the other products
DESMI Pumping Technology A/S
hydrocarbon skimmer
hydrocarbon skimmer
TERRAPIN

The TERRAPIN is a self-adjusting weir skimmer ideal for installation and deployment in tanks, industrial separators, wells and sumps where floating oil and other floating liquids need to be recovered. At the heart of the TERRAPIN ...

See the other products
DESMI Pumping Technology A/S
hydrocarbon skimmer
hydrocarbon skimmer
TERMITE

The TERMITE skimmer is based on the proven TERMINATOR design incorporating the DOP-160 pump. The TERMITE provides a lightweight package that can skim and transfer a wide variety of oils and can operate effectively in open water conditions. The ...

See the other products
DESMI Pumping Technology A/S
centrifugal separator
centrifugal separator
S 200 BD 32

Width: 700 mm

The S200 BD 32 is a manual sediments discharge type and the material in contact with the product is AISI 304 and F51. It has a cover and sediments discharge chamber in accordance with AISI 304. The device consist of 4 kW installed power ...

See the other products
Pieralisi - Separation Solutions Division
centrifugal separator
centrifugal separator
S200 WL 44

Width: 700 mm

Sediments discharge type: Manual Material in contact with the product: AISI 304/F51 Cover material: AISI 304 Sediments discharge chamber material: AISI 304

See the other products
Pieralisi - Separation Solutions Division
centrifugal separator
centrifugal separator
S200 BW 44

Width: 700 mm

This is the decanter centrifuge which is a manual sediment discharger. The material in contact with this product is AISI 304/F51 while the cover is made of a highly durable material AISI 304. To ensure same quality, the sediment discharging ...

See the other products
Pieralisi - Separation Solutions Division
air separator
air separator
ZS Series

The Neue Herbold ZS series cascade sifter is utilized for the separation of various types of materials for example; materials that must be separated for evvironmental reasons, separation for better quality or separation for further ...

cyclone separator
cyclone separator

1

forklift truck tilt truck
forklift truck tilt truck
FP-BE 1000

Capacity: 1,000 l - 1,000 l

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The ...

waste tilt truck
waste tilt truck
FPB1800-2200

PAPER COLLECTION CONTAINERS - 1800/2200 LITERS Self dumping buckets, painted plate with forkbase mounted for lifting with forklift. Mesh walls for the collection of paper. All containers are equipped with wheels for manual handling. ...

waste tilt truck
waste tilt truck
FP series

TIPPING CONTAINERS Tipping containers in steel sheet painted watertight, with the base fork mounted for lifting with a forklift. They are supplied in series with settling tank, filter sheet for the separation of liquids or solid ...

magnetic separator
magnetic separator

〇Separators ・Vibrating Separator Workpieces and abrasive media are separated through a screen mounted on the vibratory frame. ・Magnetic Separator Recommended when the size of workpieces and abrasive media is similar. Available in ...

cap sorter
cap sorter
M105

cap sorter
cap sorter
M106

cap sorting and distribution system
cap sorting and distribution system
SD-1200

laser sorting machine
laser sorting machine
dSort Go

Throughput: 10 p/s

Automatic entry level sorting machine with single transparent glass table. dSort Go "Single-table automatic sorting machine for checking the pieces on both sides. Among its main features stands out the compact and small size, thanks ...

See the other products
Doss Visual Solution
laser sorting machine
laser sorting machine
dSort 0

Throughput: 5 p/s

Automatic sorting machine for dimension and surface visual inspection of micro o-rings. Automatic sorting machine for the dimensional and surface control of micro O-rings and micro parts. Parts will travel through the feeding system ...

See the other products
Doss Visual Solution
automatic sorting machine
automatic sorting machine
dSort 1

Throughput: 20 p/s

High productivity compact automatic sorting machine. High productivity compact automatic sorting machine. Parts travel through the feeding system and get separated into 2 lines onto 2 tables. The system controls dimension and surface ...

See the other products
Doss Visual Solution
food waste treatment plant
food waste treatment plant

Kitchen waste mainly refers to the daily life of residents, food processing, catering services, unit meals and other activities generated by garbage. Kitchen waste includes waste edible oil and kitchen waste. Waste edible oils and fats ...

See the other products
GEP ECOTECH CO., LTD.
primary waste crusher-shredder
primary waste crusher-shredder

Capacity: 20-60m³/h The Material Size after Shredding: 200-300mm System Introduction: The disposal system of bulky waste is mainly composed of heavy chain conveyor, double shaft shearing shredder, iron separator, dust suppression ...

See the other products
GEP ECOTECH CO., LTD.
waste crusher-shredder
waste crusher-shredder
GV series

Capacity: 3-15t The material size after shredding: 150-300mm wastes with hazardous characteristics which are listed in the national list of hazardous wastes or identified according to the identification standards and methods of hazardous ...

See the other products
GEP ECOTECH CO., LTD.
wet separator
wet separator
MBS

Self-discharging ERGA MBS permanent magnetic drum separator is designed for automatic continuous recovery of strongly magnetic inclusions from slurries and process media. - Permanent magnetic system: The magnetic field parameters ...

See the other products
ERGA
wet separator
wet separator
PVM

ERGA PVM wet high intensity separator (WHIMS) provides high recovery rate of minerals with low magnetic susceptibility in mining and mineral processing industries (tin, iron, manganese, diamond and gold-bearing ores, ilmenite sands, etc.) ...

See the other products
ERGA
eddy current separator
eddy current separator
SMVT-E5

ERGA SMVT-E5 eddy current magnetic separator provides recovery of fine nonferrous metal particles from nonconductive fractions in processing of raw materials. It is irreplaceable for getting additional profit and clean materials from ...

See the other products
ERGA
magnetic separator
magnetic separator

In order to guarantee the safety of processes and avoid contamination in our products with metallic materials, OGA has implemented systems for capturing and retaining metals in online processes. These magnetic traps have an easy cleaning ...

magnetic separator
magnetic separator

In order to guarantee the safety of processes and avoid contamination in our products with metallic materials, OGA has implemented systems for capturing and retaining metals in online processes. These magnetic traps have an easy cleaning ...

incinerator
incinerator
i8-1000

The i8-1000G has one of the highest capacities of our range of general waste incinerators. It is suitable for various waste streams such as solid waste, MSW, RDF, wood, paper, cardboard and plastics (any many others types - too many ...

See the other products
Inciner8
waste incinerator
waste incinerator
I8-700G

The i8-700G is one of our largest models and boasts a wide array of features - many unique to the i8 range. Developed over the last 3 years the i8-700G is at the fore-front of combustion technology and offers impressive burn rates and ...

See the other products
Inciner8
waste incinerator
waste incinerator
I8-250G

I8-250G model is the first of our larger models with the internal capacity to handle ponies, cows and other larger animals. The i8-250G is a high capacity model from our range of general waste incinerators with suitability for various ...

See the other products
Inciner8
centrifugal separator
centrifugal separator
SLS series

Filtration size: 5 µm
Flow rate: 300 m³/h - 4,924 m³/h

Solberg’s Knockout series is a heavy duty multistage liquid and particulate separator to protect vacuum pumps from harmful contaminants. This turn-key solution is readily available and easily configured. Multiple separator pack options ...

pneumatic separator and drain
pneumatic separator and drain
DSP series

The Pneumatic Drain System allows Solberg Liquid Separator units to be drained without stopping the process or any loss of vacuum. The liquid removed by the liquid separator flows under gravity into the drain pot. When the high level ...

centrifugal separator
centrifugal separator
STS series

Flow rate: 42 m³/h - 424 m³/h

Inlet air with potentially harmful liquid and large particulate enters the housing and is separated by a baffling mechanism and directional air flow changes. The larger particles and liquid drop down and collect at the bottom of the separator. ...

magnetic drum separator
magnetic drum separator

- magnetic drum for heavy working conditions - can work in water! - Automatic and efficient separation of unwanted ferromagnetic contaminants from raw materials or enrichment of ferromagnetic materials. - The stainless steel casing separates ...

See the other products
MDR d.o.o.
magnetic drum separator
magnetic drum separator
MB series

- Automatic and efficient separation of unwanted ferromagnetic contaminants from raw materials or enrichment of ferromagnetic materials. - The stainless steel casing separates the ferromagnetic particles into the collection container. - ...

See the other products
MDR d.o.o.
magnetic plate separator
magnetic plate separator
PMP

Simple and affordable magnets. Manual cleaning or cleaning with a non-magnetic sliding or rotating plate. No maintenance required.

See the other products
MDR d.o.o.
automatic sorting machine
automatic sorting machine
iSort

The iSort, combined with the iLift elevator, is the perfect solution to improve the packaging line efficiency by sorting broken, twins or capped tablets before entering the feeding system. Key benefits Sort broken, twins and capped ...

capsule sorting and distribution system
capsule sorting and distribution system

The Diverter D4 is used to distribute the product into a maximum of 4 drums/containers according to the product amount produced, or alternatively equipped with weight cells. Key benefits Extends manufacturing time without supervision Reduces ...

capsule sorting and distribution system
capsule sorting and distribution system
EPS

The “EPS”, short for Euro Pallet System, enables product distribution into different drums/containers according to tablet press counter pre-set produced quantity, volumetric sensor, or weighing. Key benefits Extends manufacturing ...

waste incinerator
waste incinerator
MWI

* Product Description: Portable Containerized Medical Waste Incinerator * Capacity: 50 kg/h to 15000 kg/h * Applicable fields: Wastes, Medical waste * Emission: European Standards * Certification: CE, EAC, ISO 9001, ISO 14001, OHSAS 18001

vacuum separator
vacuum separator
SP21

The Tank and the pump are hanging separately on the wall. The SP21 is delivered with an Ø400 or an Ø600 tank. The Vacuum system removes the bones and the water from the filets and leaves the filets clean and dry. Control: Intervalstyring ...

See the other products
Kaj Olesen AS
air separator
air separator
7800VPF

With the equipment the following are included : A water separator, a vacuum filter, a fastening unit, a ball valve, a coupling plug of 1/2 external thread of 15 mm long, a plastic tube of ø15 x 12 mm and length 2 m, a coupler socket and ...

magnetic drum separator
magnetic drum separator
BDZA

The magnetic drum separator mod. BDZA is provided with a drum covered with dozens of small magnets to eliminate the ferrous elements normally present in the grain that may affect the correct functioning of the downstream machineries, ...

See the other products
Defino & Giancaspro
air classifier
air classifier
BTKA

See the other products
Defino & Giancaspro
vibrating separator
vibrating separator
TV

The vertical-aspirator mod. TV is used principally in the flour milling for the selection of low density material from granular products, such as all cereals, soya, cocoa beans, pulses, etc…

See the other products
Defino & Giancaspro
magnetic separator
magnetic separator
SW-OS series

Magnetic Liquid Traps, also named as Magnetic Liquid Filters, are designed for removing Ferrum contamination form liquid or semi-liquid materials with different viscosity, to keep materials purity and protect the equipment. Quick Interface ...

See the other products
NINGBO SOUWEST MAGNETECH DEVELOPMENT CO.,LTD
magnetic grate separator
magnetic grate separator
S-PCPS series

Product Description: Program Controlled Pneumatic Magnetic Separator, also named Self Cleaning Magnetic Grate Separator, is designed for continuously production line to removeFerrum scraps from the materials without any interruption. Features: 1. ...

See the other products
NINGBO SOUWEST MAGNETECH DEVELOPMENT CO.,LTD
magnetic grate separator
magnetic grate separator
SWFL series

Magnetic Liquid Traps, also named as Magnetic Liquid Filters, are designed for removing Ferrum contamination form liquid or semi-liquid materials with different viscosity, to keep materials purity and protect the equipment. N Style: The ...

See the other products
NINGBO SOUWEST MAGNETECH DEVELOPMENT CO.,LTD
optical sorting system
optical sorting system
OSX series

Throughput: 5 p/h - 250 p/h

The main advantage of the OSX system is connected with its universality and at the same time very sophisticated image processing functions. The use of recently developed sophisticated commercial software makes it very competitive compared ...

See the other products
Comex
X-ray sorting machine
X-ray sorting machine
CXR series

Throughput: 15 p/h - 250 p/h

Feed material is supplied to the vibrating chute, where individual rocks are separated before falling on to the horizontal belt. The rocks are supplied to the X-ray analyzing unit and at the end of the belt they enter the optical analyzer ...

See the other products
Comex
X-ray sorting unit
X-ray sorting unit
MSX series

Multichannel scanning system from Comex (MSX series) provides a wide range of test possibilities to characterise and separate different materials. The main function is to characterise analysed particles in terms of their properties like ...

See the other products
Comex
waste crusher-shredder
waste crusher-shredder
K 30/T series

This shredder model electric 30hp is configured with blade T, with plates welded perpendicularly on the blades to make sure that we are considering to shred e material as a crusher. The hourly production resulting raised while the output ...

waste crusher-shredder
waste crusher-shredder
T 200 series

Using 200hp and a special blade set, The waste crusher T200 is a powerful and special model at 2- shaft, used as primary machine in waste treatment. The independent shafts and their particular hooked blades make this model the most indicated ...

waste crusher-shredder
waste crusher-shredder
T 400 series

Using 400hp and a special blade set, The waste crusher T200 is a powerful and special model at 2- shaft, used as primary machine in waste treatment. The independent shafts (running backward and forward) and their particular hooked blades ...

rapid fermentation composting machine
rapid fermentation composting machine
COMPO FUJI SK series

Volume: 18, 37, 70, 100 m³
Height: 7,220, 5,060, 6,000 mm
Hydraulic drive power: 4, 6, 8 kW

Features. Process Rapid fermentation composting system" COMPO FUJI " From Organic waste to valuable organic fertilizer By aerobic fermentation. Due to the growth of farming scale & increasing food wastes, a large capacity organic ...

stacker tilt truck
stacker tilt truck
748R

Capacity: 280 l

748R - 280Lt - TIPPING CONTAINER PERTUTTO model most compact Tipping container “Pertutto” ideal for collect scrap, waste and scraps wreckage easily and safely in the proximity of the work areas; available in various versions and capabilities ...

See the other products
BUTTI
stacker tilt truck
stacker tilt truck
750R

Capacity: 300 l

750R - 300Lt - TIPPING CONTAINER PERTUTTO Tipping container “Pertutto” ideal for collect scrap, waste and scraps wreckage easily and safely in the proximity of the work areas; available in various versions and capabilities with and ...

See the other products
BUTTI
stacker tilt truck
stacker tilt truck
751R

Capacity: 500 l

751R - 500Lt - - TIPPING CONTAINERS “PERTUTTO” Tipping container “Pertutto” ideal for collect scrap, waste and scraps wreckage easily and safely in the proximity of the work areas; available in various versions and capabilities with ...

See the other products
BUTTI
pusher sorting system
pusher sorting system
AR001

Air jet system Faulty products are blown up outside the conveyor by the air. Model - AR001 Identifying direction - Two-way Transport weight - ~0.3kg Air source - 0.5Mpa~0.85Mpa Mass - 3kg

See the other products
SYSTEM SQUARE Inc.
pivot arm sorting system
pivot arm sorting system
FL series

Flipper system The arm rejects faulty products sideward. Model - FL220 / FL350 Identifying direction - Three-way Transport weight - ~3kg Air source - 0.5Mpa~0.7Mpa Mass - 37 / 70kg Size - W400×L700 / W550×L800

See the other products
SYSTEM SQUARE Inc.
tilt-tray sorting system
tilt-tray sorting system
DV series

Dropout system (with belt) The conveyor end moves to drop faulty products. Model - DV250 / DV400 / DV540 Identifying direction - Two-way Transport weight - ~5kg Air source - 0.5Mpa~0.7Mpa Mass - 22 / 28 / 37kg Size - W350×L350 ...

See the other products
SYSTEM SQUARE Inc.