Other waste treatment equipment

Flow rate: 70 ft³/min - 2,100 ft³/min

When the air is compressed through compressor, it results in condensate along with compressed air. Condensate - A mix of water, oil & dust particles. If not treated properly and releasing it to the environment, this condensate can make ...

Flow rate: 2.83, 4.25, 10.34 m³/min

Maximum operating pressure:16 bar g (232 psi g) Maximum recommended operating température:66°C (150°F) Minimum recommended operating température:1.5°C (35°F) Typical pressure differential at rated flow:20 - 60 m bar (0.3 - 0.9 psi)

Width: 479 mm

The separators F EKO series have been re-designed aimed at the reducing of operating costs, keeping the same quality standards that distinguish our machines worldwide. The F EKO separators have been designed to separate granulated materials, ...

Width: 810 mm

The separators F EKO series have been re-designed aimed at the reducing of operating costs, keeping the same quality standards that distinguish our machines worldwide. The F EKO separators have been designed to separate granulated materials, ...

Width: 1,350 mm

The separators F EKO series have been re-designed aimed at the reducing of operating costs, keeping the same quality standards that distinguish our machines worldwide. The F EKO separators have been designed to separate granulated materials, ...

Filtration size: 10 µm

Eaton's in-line Gas/Liquid Separator Type L automatically removes 99% of all liquid and solid entrainment particles 10 microns in size or larger. And it does so with no moving parts to break or wear out. Series L Gas/Liquid Separators ...

The DSP Grit Trap is used to remove sand from sewage in waste water treatment plants. The equipment consists of a drive unit complete with a central bearing, two steel blades operated by an impeller and a central air lift pipe. Function Sewage ...

Filtration size: 15 µm
Flow rate: 10 m³/h - 65 m³/h

The SEPCOM Horizontal Screw Press Separator consists of a feeding section provided with a compensator tank and overflow hopper. The stainless steel casing includes a screw conveyor and a cylindrical screen basket that conveys and separates ...

Filtration size: 15 µm
Flow rate: 10 m³/h - 65 m³/h

The SEPCOM 0150V is a solids-liquid screw press separator. The machine consists of: - an inlet module - a separation and conveying module - a compacting module The feeding section is provided with a compensator tank and overflow ...

Quadrax is a system where four conductors are located within a single conducting enclosure. The connection to two separate twinax cables is accomplished without disturbing the differential or signal-to-shield impedances values. A complete ...

Complying with the ASME BPE guide (2005 edition) standard, the CS10 Stainless Steel Clean Steam Separator removes entrained moisture from clean and pure steam systems. Dry steam is essential to meet sterilization standards, to avoid damage ...

• Separators - designed to gather small water droplets from steam and separate them from the pipeflow. • Reduce wet steam. • Maintain heat transfer efficiency. • Reduce erosion and corrosion in your steam system. • Reduce pipework ...

In many aspects of process engineering, separators are used for mechanical separation and clarification of mixtures comprising solids and liquids. A separator is liquid-oriented and works with a higher rotation speed than a decanter. ...

Width: 80, 110 mm

AK and FO Separators (AK) protect the vacuum pump at the inlet from particles and liquid droplets. Oil mist filters (FO) protect air, both inside and outside the laboratory, from contaminated oil mist. Both have catchpots made of plastic ...

Metal separator for the examination of free falling bulk materials, fulfilling even most stringent hygiene requirements. Detects all metals encapsulated or as loose parts Extremely precise metal detection – impressively reliable Immune ...

METAL SEPARATOR FOR THE COMBINATION WITH VACUUM FILLERS TO EXAMINE LIQUID / PASTY FOOD PRODUCTS. Detects and separates all metals as inclusions or as loose parts. Can be connected to all commercial vacuum fillers. Time-saving cleaning ...

Metal separator for installation in liquid conveying lines to inspect fluid as well as pasty products like baby food. The hygienic 3-way separating valve without dead space is suitable for CIP and optional pigging cleaning procedures. Versions ...

Soft Separator Technical Data: • Operator requirements: 1 person • Drum hole diameter: 1.3, 2, 3 ;4, 5 mm (other dimensions upon request) • Throughput: The throughput is dependent upon several factors including: type of product, ...

Soft Separator Technical Data: • Operator requirements: 1 person • Drum hole diameter: 1.3; 2; 3 ;5 mm • (other dimensions upon request) • Throughput: The throughput is dependent upon several factors including: type of product, ...

Soft Separator Technical Data: • Operator requirements: 1 person • Drum hole diameter: 1.3;2;3;5 mm • Throughput: The throughput is dependent upon several factors including: type of product, hole diamter, in-feed device, material ...

Flow rate: 1 m³/h - 10 m³/h

Multi-phase separation and mechanical emulsion and foam breakers in this deoiler model are divided in two pressure vessels. The separation rate of 5 ppm residual oil content in the bilge water meets the requirements in National Special ...

Flow rate: 1 m³/h - 100 m³/h

Safe, fully automatic separation of oils from process water Use in industry, power stations and oil & gas Residual oil content down to less than 5 ppm Fully automatic operation Little space required thanks to compact design Maximum ...

Flow rate: 100 l/h - 1,000 l/h

The non-pressurised MSEB-DL oil-water separator is a patented mechanical emulsion and suds breaker. It is used to maintain in- dustrial washing baths and water-based cooling lubricants by separating outside oils from the ...

Flow rate: 3,000 l/h - 40,000 l/h

AFPX separators are used in meat, fish and blood processing industries to purify and enhance recovery of valuable protein fractions, fats and oils. These robust and high performing separators are especially designed for extremely demanding ...

SECO/WARWICK has incinerators to handle all types of wastes be it hazardous, non-pumpable, tarry, liquid, solid, gaseous, hospital or garbage waste. Our incinerators are custom built with different units like main combustion chamber for ...

The PP 25 is a compact benchtop pellet press with a pressure force of 25 t. It produces stable, high-quality pellets with a smooth surface which are used for XRF analysis. The dies for the PP 25 are available in various diameters and ...

Pellet Press PP 40 is a compact unit that produces smooth and sturdy pellets from ores, slag, minerals and cement with simple and safe operation. With an individual pressure force regulation ranging from 50 to 400kN, it is ideally suited ...

Solid, high-quality pellets are an important precondition for reliable and meaningful XRF analysis. With the PP 35, RETSCH offers a pellet press which produces strong pellets with a smooth surface. The PP 35 features an individual ...

Width: 103, 139, 190, 248 mm
Flow rate: 2.26 m³/min - 65.63 m³/min

The BOGE-High-capacity Cyclone Separators are ideal for eliminating liquids, fine mists and solids from compressed air. It functions directly downstream from the compressor if no compressed air receiver is fitted, if compressed air receiver ...

Width: 255 mm - 1,160 mm
Flow rate: 2 m³/min - 60 m³/min

Design is intended for condensate cleaning in order to prevent serious environmental damage as 1 liter of condensate can contaminate 1.000.000 Litres of water. Special laws in all industrial nations are intended to prevent such ...

Flow rate: 200 m³/h

The oil mist separator Nova is suitable for smaller machine tools with a cabin volume up to 2m³/70CF. Besides getting clean air in your workshop, you will also be able to reuse the oils/coolants that are separated. With the high-quality ...

Flow rate: 600 m³/h

The oil mist eliminator Anna effectively cleans the oil mist formed during the CNC metal working process. Besides dispensing clean air into the workshop, the Anna recycles almost all of your oil/coolant separated. The Anna is suitable ...

Flow rate: 900 m³/h

The oil mist separator Lova is designed for machining processes that use oils or coolants and is suitable for all machine tools with a cabin volume of up to 9m³/318CF. The disc stack technology will effectively separate the fluid ...

Flow rate: 17 l/s - 6,895 l/s

The OSC can separate all kinds of condensate from all compressed air set-ups technologies, giving unparalleled performance and reliability for minimal maintenance. Environment-friendly After separation the discharge condensate contains ...

The CTS Eliminator II separates oil contamination from condensate before being expelled. The condensate becomes contaminated by the oil and must be treated before expelling it into a sewer system or onto the ground. The oil must be separated ...

Width: 220 mm

Separates milled PCBs carefully and quickly PCBs are separated carefully and quickly, off-cuts are removed precisely and smoothly. A two-part matrix enables the different blades to be assembled resp. exchanged easily. Off-cuts are ...

The compact MAESTRO 2 separates PCBs quickly and economically. Little footprint is required. MAESTRO 2 is the affordable entry-level device to handle smaller demands. PCBs are fed between the circular blades manually to be separated. MAESTRO ...

The MAESTRO 3E separates both small and large PCBs. The support table and the rest can be set continuously to the best possible operational position. By adjusting the distance between the linear blade and the rest, margin strips can ...

Drain Separator for Vacuum AMJ ・Remove water droplets from the air by simply installing it in vacuum equipment connection lines. ・Effective for removing water droplets from the air sucked into vacuum pumps, ejectors, etc. Drain ...

The ANDRITZ high-gradient magnetic separator allows the extraction of one protein fraction directly from the non-purified complex feedstock. With HGMS technology, the efforts of downstream processing can be decreased drastically while ...

Flow rate: 500 l/h - 90,000 l/h

Designed for high efficient solid/liquid and liquid/liquid sepa­ration Our separators portfolio includes 3 designs, two-phase, three-phase, and nozzle-type. The two- and three-phase separators are available with solid bowl with capacity ...

Briquette press for unrivaled swarf management The Weima Briquette press reduces waste-material handling and labor, saves money on waste disposal costs, and recovers up to 50% more coolant. Designed to work with one or two HC6 Microseparator ...

Chip Separator with transfer tank Traps and separates the coolants or liquids that are filled with chip and tape debris from the generator, for maximum water and coolant recovery and reuse. Chip debris are automatically discharged to ...

Automatic separation valve Automatic separation of unwanted product elements during grinding and portioning Can be used with all VEMAG grinders Production of high-quality products Increase production reliability Range of raw materials Flexible ...

Automatic Bale Opener UNIfloc A 12 Innovative bale take-off technology guarantees high efficiency in the blowroom - 2 400 kg/h line production - Highly effective cleaning thanks to microtufts - Energy-efficient machine concept PRODUCT ...

Compacting device COMPACTdrum Minimal hairiness and maximum flexibility Very low production costs New dimension in hairiness reduction Easy to install and remove PRODUCT DETAILS With easy installation and removal, the compacting ...

OSC oil-water separators The OSC can separate all kinds of condensate from all compressed air set-ups technologies, giving unparalleled performance and reliability for minimal maintenance. Environment-friendly After separation ...

OSS oil-water separators An oil water separation solution for low flow applications that disposes of oil in compressor condensate in a safe and environment-friendly way. Economic solution With our OSS you will be able to avoid ...