DN: 1 in
Pressure: 8.3 bar
Temperature: -55 °C - 71 °C
... the car heat is restored, the valve will modulate closed, allowing for the tank to be refilled before returning to service. Since the valve is completely mechanical, no electrical or air connections are required for the ...
Thermomegatech
DN: 0.125 in
Pressure: 60, 100 psi
Temperature: -18 °C - 49 °C
... time following stream switching. Sample cross contamination is prevented by using 3- way solenoid valves which separate the drains. To assure a representative sample from every line, all samples flow ...
Pressure: 6,000 psi
... 64bar) 'HSB' rated upto 3,000psi (207bar) 'PSB' rated upto 6,000psi (414bar) The 3- way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving ...
Alco
DN: 0.5 in - 2 in
Pressure: 2 MPa
Temperature: -20 °C - 120 °C
... Brass threaded motorized control valves of ES100/ES150 and BL220/BL350 series apply to HVAC (heating, ventilation, and air conditioning), and building automation systems. Once the motorized control valves receive signals ...
Taloar
DN: 10 mm - 100 mm
Pressure: 10 bar - 90 bar
Temperature: -20 °C - 160 °C
... Full bore stainless steel high purity ball valves, obtained from AISI 316L round bars, with ball enclosed in two integral TFM™ PTFE sealing seats, suitable for intercepting pure steam and fluids under pressure. The high purity design ...
DN: 3.2 mm - 4.2 mm
Pressure: 100 bar - 400 bar
... Internal Tighteness : Mini 10- 3 mbar.l/s en helium ( Valve / Seat) External Tighteness : Mini 10-4 mbar.l/s en helium KV value for a pressure drop / loss ΔP = 1 bar : - Internal diameter Ø 3,2 mm ...
IMF
DN: 0.125 in
Pressure: 25 psi - 125 psi
Temperature: -18 °C - 46 °C
... cylinders and for piloting larger valves All models may be configured 3- way normally open, 3- way normally closed, or 4- way Twenty-seven different actuators ...
Bimba
DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C
... in heating systems in which a certain loss through leakage is desired. Features MH32F: 3- way valves with nominal diameters DN 20...150 MH42F: 4- way valves with ...
Fr. Sauter AG
... . Best results are obtained with oils from 32 to 220 cSt viscosity. The oil jet inlet port is available in a 1,2 or 3- way configuration. Key features: - FLOW RATE: 0,06 - 0,10 - 0,16 cm - Minimum Pressure ...
Pressure: 0 bar - 12 bar
Temperature: -25 °C - 85 °C
... Certificates: Tested and Proven for Automative applications
DN: 40, 25 mm
Pressure: 10 bar
... Travel of handle limited to 90° or 180° 1/4” BSP or NPT threaded socket for different connections (Praher® laboratory ball valve, conductivity-meter etc.) Individual project requirements on request Seal materials - EPDM, ...
Praher Plastics Austria GmbH
DN: 20 mm - 100 mm
Pressure: 16 bar - 25 bar
Temperature: -200 °C - 220 °C
... SPECIFICATIONS : Size 20 mm ( 3/4”) to 100 mm (4”). Unified Flanges As per ANSI CI. 150 and PN 16. Pressure Rating As per ANSI CI. 150,CI. 300,PN 16 & PN 25. Pressure Temp. Rating. As per ASTM-A-16.34. Gland Packing ...
Avcon Controls PVT. Ltd.
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C
... disk) Differential pressure note : 240 kPa (low noise operation) Flow characteristic : equal percentage at 2- way/ 3- way valve linear at 3- way valve ...
DN: 0.25 in
Pressure: 27.6 bar
... three- way bronze globe valve is recommended for trim valve application in an automatic fire sprinkler system. It is typically used to attach a pressure gauge to the system. The resilient seat allows ...
DN: 50 mm - 400 mm
Flow rate: 3,000 m³/h
... AMOT Model G, 3- way temperature control valves provide a high degree of accuracy and repeatability for accurate temperature control and are also used in mixing or diverting service over a wide flow range. Features ...
AMOT
DN: 20 mm - 100 mm
Pressure: 25 bar
... Nominal diameter DN 20...100 Nominal pressure PN 16. 25 Three- way design with short B -flange Spindle packing with chevron rings or long life torsion safe chambered bellows seal Easy to change the actuator orientation for operation and ...
RTK Regeltechnik Kornwestheim
DN: 0.25 in - 2 in
Pressure: 64 bar
Housing and ball made of 1.4408. Sealing material: PTFE / FKM.
DN: 40 mm
Pressure: 10 bar
Temperature: 10 °C - 60 °C
... directed to intermediate ports. • The ball, with its T-shape flow pass, allows the following options: - Two way valve 90º ports, third way closed. • Self-centering ball with 4 seats. • Handle can ...
Cepex SER
DN: 25 mm - 100 mm
Pressure: 10, 16 bar
Temperature: 140 °C
... space-free. In addition to passage ball valves and three- way ball valves, also ball valves with rinsing connections and heating jacket are available. ► gap-free sealing of the housing ► ...
DN: 10 mm
... evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. The MAC “lifting” configuration is unique, however, in that the valve maintains a balanced design ...
MAC Valves
DN: 25 mm - 150 mm
Pressure: max 22.7 bar
... Reliable flow direction control in a hygienic production process - Two-part valve disc, screwed, with a defined space for the sealing ring for easy installation - Seal resistant to seepage and ripout - Shaft seal design: ...
Pressure: 125 psi
... Change direction of air-conveyed material The Three- Way Sliding Hose Switch by Dynamic Air Inc. is a smooth, full ported, air operated switch for use in almost any pneumatic conveying system. It is rated to 125 PSIG and is available ...
Pressure: 0 bar - 250 bar
Flow rate: 0 l/min - 22 l/min
... The pressure and temperature compensated three- way flow control valves serve to control the flow sent to the actuator and to discharge it, which exceeds that required, back to tank at system pressure rather than at relief ...
DN: 8 mm - 50 mm
Pressure: 40 bar
Temperature: -20 °C - 140 °C
... Body material Stainless steel 316 Ball material Stainless steel 316 PN (End) PN40 Connection Female BSP Contact sealing PTFE Operating system Lever ...
TECOFI
DN: 0.25 in - 2 in
Pressure: 16 bar
Temperature: -10 °C - 120 °C
... varying positions, 3- way tightness configurations, and an optional T or L port orientation. SPECIFICATIONS : • - Reduced bore • - 2 Positions • - PTFE packmg + 2 NBR o-ring • ...
SFERACO
the best suppliers