Spear bolt with washer made in not worked steel or galvanized, produced according to ISO 890. They are made according to the technical specifications required by the customer. The steel Spear bolt is ...
Diameter: 0 mm - 2 mm
Adjustable Diameter Blind Bolts Adjustable Diameter Blind Bolts are easily installed and removed from one side only. Two or more mating structures can be clamped up, while at the same time, the hole ...
All bolts are available in standard and customer-specified packs.
... the original self-sealing bolt designed and patented by APM. The APM line of self-sealing bolts, screws, and nuts are designed to seal out air, water, lubricants and other liquid or gaseous contaminants. ...
Diameter: 8, 10 mm
Length: 72 mm
CADDY® ROD LOCK anchor screw features the innovative "push-install" design. The threaded rod locks into position on pushing it through the mounting hole, simplifying the installation of the threaded rod. This mounting system includes ...
black electrophoresis bolt Material Stainless Steel - SS201,SS301, SS303, SS304, SS316, SS416 etc. - Steel - mild steel, Carbon steel, 4140, 4340, Q235, Q345B, 20#, 45# etc. - Brass - HPb63, HPb62, ...
Diameter: 10 mm - 64 mm
Length: 30 mm - 600 mm
... 5 (Class 8.8) bolts up to 3/4” (M20) feature a Clear Zinc finish. Grade 8 (Class 10.9) bolts up to 3/4” (M20) feature a Yellow Zinc finish. Larger bolts feature a Plain finish and ...
Diameter: 8 mm - 24 mm
Length: 40 mm - 80 mm
100% crack detected ICE-bolt (hexagon- head and -socket bolt) for the assembly of the VLBG-PLUS.
Diameter: 16 mm - 48 mm
Length: 110 mm - 160 mm
100% crack detected hexagon- head and -socket bolt for the assembly of the VLBG. The hexagon socket bolt is with a snap ring so that it can be captively mounted with the VLBG.
Diameter: 8 mm - 24 mm
Length: 25 mm - 82 mm
This high-strength RGS eyebolt is ideal for lifting machine parts. Eyebolts may only be tightened manually and are not suitable for diagonal pull. However, they cannot be beaten when it comes to quality. Permitted usage For load capacities ...
Length: 25 mm - 80 mm
M5, M8, M12 and M16 hex nut bolts are used with the low-profile clamps. Standard hex nut bolts are normally operated with an allen key.
... can be adjusted from 2.8" (71.1mm) to 4.95" (125.7mm). Different heights can be achieved using different length 5/16"-18UNC bolts.
Diameter: 8 mm - 36 mm
Length: 13 mm - 54 mm
The safe working load is only suitable for hoisting and pulling in line. The lifting eye must not be loaded sideways. Material: C15 Marking: According to standard, CE-marked Standard: DIN 580 Note: Only use in a ...
... and the improvement of product structure,this gap is gradually narrowing. > Alumina Zirconia Ceramic Insulation Fastener Bolt And Screw > Thread Specification:M3-M24 > Screw cap:Hexagonal socket, flat headle > Plain ...
SPECIFICATIONS : • - Absorb vibration, noises and expansion • - Linear and angular compansion • - Inner tube EPDM HT • - 130mmlength • - Dichromate zinc plated Steel swiveling flanges PN10/16 up to DN150. PN10 over • - On request. ...
... components of ultrasonic shredders in medicine, and vibrating film of advanced audio speakers. Application of titanium alloy bolts Relatively expensive metal materials such as titanium alloy are mainly used in some ...
... The bolts mainly customed as titanium, tantalum, zirconium, HC276, Monel 400, tungsten, molybdenum. Custom-made titanium bolts are bolts that are specifically designed and made to ...
... jack bolt tensioning system is a simple solution that makes it easy to remove and later reinstall the jack bolt. Skip the hours and risk that are traditionally spent swinging a weighted object against ...
Diameter: 6 mm - 20 mm
Length: 25 mm - 315 mm
T-Slot Bolt with Nut and Washer • Quality 12.9 • Black coating
Diameter: 6 mm - 42 mm
... You can also download the technical sheet of the U bolts and clamps (pipe clamp). We manufacture four series of U bolts based on the dimensions and weight that they must support. Redfluid U bolts ...
Diameter: 10 mm
Length: 80, 140, 70 mm
Stainless Steel Accessories for Playgrounds Stainless Steel Eye Bolts NM DIN 444, AISI 304
New design 17,5” might come with a smaller stud hole. If so Gaither has a mini bolt available for the Bead Vice.
BEAD BAZOOKA
Diameter: 1 in
... may be substituted for equivalent metric sizes as may be needed. The following definitions will apply for Anchor Bolts: • Bolt: A bolt is an externally threaded fastener, typically ...
Please specify:
Help us improve:
remaining