Brass solenoid valves

DN: 0.5, 0.25, 0.375, 0.125 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... CESI 03 ATEX 344 Extension No. 01/12 (other certifications e.g.EAC, INMETRO, CCOE etc. on request) VALVE CONSTRUCTION Seal material NBR - FPM - EPDM Housing Red colour alloy (painted with epoxy powder) FEATURES Maximum allowable ...

Voltage: 5, 6 V
Temperature: 1 °C - 70 °C
Pressure: 20,000, 800,000 Pa

... XHnotion develops new latching solenoid valve for water, which is called bi-stable solenoid valve. The valve will keep original state without power. It is ideal for ...

DN: 0.8 mm - 2 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... freezing) Ambient : -10ºC to 50ºC Materials in contact with media Main Valve: Aluminium, Stainless Steel AISI 316, Brass Solenoid Operator Stainless Steel AISI 300 & 400 series, Brass Seals: ...

DN: 10, 12, 19, 25 mm
Pressure: 6 bar

... NO DIFFERENTIAL PRESSURE SOLENOID VALVE FOR STEAM 2/2 NO differential pressure solenoid valve for STEAM - Brass Body and seat - Internal parts in stainless steel - EPDM ...

DN: 13 mm - 40 mm
Voltage: 24 V - 230 V
Temperature: -10 °C - 80 °C

DN: 0.25 in - 2 in
Voltage: 24, 42, 110, 230 V
Temperature: -10 °C - 200 °C

... /C and pressure from 5 to 150 psi (0.3 to 10 bar) - Manual Override - Degreased Version - EEx Solenoid- Latching Coil ndumart Series SVP500 Solenoid Valves are suitable for processes involving neutral ...

DN: 1 mm - 2.3 mm
Temperature: -10 °C - 140 °C
Pressure: 40 bar

... Connections:M5 Body Material: Brass Valve functioning:2 Way Direct Acting Valve type:General Purpose Solenoid Valves ...

DN: 0.25 in - 5.5 in

... 2 Way Solenoid valves • Internal pilot operated 2 way solenoid valves, suitable for air, water and oil. • a. 1/4" to 11/2" 2 way diaphragm operated valves. The design ...

DN: 1 mm - 5.2 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 180 °C

... Body Material Brass CW617N Pipe size G1/8″, G1/4″, G3/8″, G1/2″ KV From 0,05m3/h to 0,47 m3/h Seal NBR, FPM, EPDM, PTFE Options Manual Override Electroless nickel plating Degreased for Oxygen use Others on request Applications Water ...

DN: 40 mm
Voltage: 24 V
Temperature: -10 °C - 130 °C

... 2/2 Ways Solenoid valve G 1 1/2" Inch DN40 made of brass seal EPDM servo controlled nominal voltage 24V DC pressure 0.5 - 16 bar flow rate: - 25.8 m³/h seal: - EPDM voltage tolerance: - +/- ...

DN: 0.25 in - 2 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... -way valve Impulse with differential pressure Body Brass, Stainless Steel Pilot operated piston design valve. The mentioned minimum pressure difference between inlet and outlet is necessary for ...

DN: 0.25 in - 2 in
Voltage: 220 V
Temperature: -10 °C - 150 °C

... PROVAL S100 Series general purpose solenoid valves are used in water, air, oils and other industrial applications limited with the diaphragm material and pressure range. Viton (FKM) diaphragms allows S100 solenoid ...

Voltage: 12, 24, 6, 9 V
Temperature: 50 °C
Pressure: 0 bar - 8 bar

... The valve of the type MI 210-001 is a 2-way solenoid valve, direct actuated, bistable. By using the pulse magnet principle, energy is only consumed during the switching process. By using this type of ...

DN: 0.375 in - 2 in
Voltage: 5 V - 35 V
Temperature: 2 °C - 90 °C

... Features * Valves close automatically when leakage, and alarm. * Power Supply with 2 AA, 5 batteries. * Automatically alarm when power is lower, and valve close eight hours later * Controller panel has three ...

... STBL Two-way Small Proportional Solenoid Valve Oriifce: 1.0-4.0mm Working medium: water, air, water vapor, oil, natural gas Removable maintenance Seals: NBR, Viton, EPDM... Chatacteristic: Working Pressure:0-10 ...

DN: 15 mm - 32 mm
Temperature: -10 °C - 150 °C
Pressure: 0 bar - 15 bar

... the body in brass CW617N, magnetic parts in stainless steel and the seal in FKM (Viton®) YES: for water up to 150°C. NO: for gas and steam. No need for a minimum operating pressure. NC with FKM seal The 84 series consists of solenoid ...

DN: 1.2, 1.5, 2, 2.5, 3.1 mm
Voltage: 12, 24, 110, 220 V
Temperature: -10 °C - 140 °C

... Solenoid valves for industrial applications - W Series The W series solenoid valves, offered by SENGA, are recommended for use in the industrial and pneumatic sectors. These solenoid ...

DN: 10 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... quality indirect solenoid actuated diaphragm valve made of brass. ˃ High flow rate ˃ Compact design ˃ Working fluids: water, air, gas, petrol products etc. ˃ All standard voltages available The ...

DN: 13 mm - 50 mm
Voltage: 230, 24 V
Temperature: -10 °C - 80 °C

... Among the main advantages of the RSG coaxial valves we find the short switching times and their versatility of use, with operating pressures ranging from 0 to 300 bar. The versions available are coaxial direct operated or external, 2/2 ...

DN: 0.5 in
Voltage: 230 V
Pressure: 0 bar - 16 bar

... can be installed in any position and at any point in the compressed air line. Manufactured using a solid brass casing and reliable solenoid valve with and electronic timer to control periodic operation. Equipped ...

DN: 16 mm
Voltage: 24, 12, 120 V
Temperature: 150, 80 °C

... 1325 with three-way solenoid valves are obtainable in metal or 304 stainless steel bodies. You have an option to seal and seat materials, including Acrylo-Nitrile and Viton® fulfill numerous general industry provisions. ...

DN: 6.45 mm - 47.8 mm
Voltage: 110 V - 240 V

... 1/4in (6.45mm) | Brass
RV3S3 | 0.110 in (2.8mm) | 3/8in (9.60mm) | Brass
RV5S3 | 0.154 in (3.9mm) | 3/8in (9.60mm) | Brass
RV6S3 | 0.197 in (5.0mm) | 3/8in (9.60mm) | Brass
RV6S4 ...