Coated drill bits

Diameter : 0.15 mm - 2.9 mm
Length: 19 mm - 175 mm

... even better performance The HSS drill range is being expanded with the addition of new drills made from powder-metallurgically-manufactured HSS. HSS-E-PM drill High cutting ...

Diameter : 3 mm - 4.7 mm
Length: 62 mm - 153 mm

Product description Description: Rake angle 30° Shank Ø h7 Description: Spiral flutes Description: SZID = Coupling Size TQX = Torque Moment NOF = No. of cutting edges CERATIZIT has been a pioneer in the field of ...

Diameter : 2.5 mm - 4.9 mm
Length: 57 mm - 310 mm

... AL High Performance Drill DLC-coated solid Carbide high-performance drill, specially designed for applications in aluminium, non-ferrous metals and cast iron materials. Advantages More ...

... of the drill. The grades of the drills (WJ30ET and WJ30EU) are another new addition. These comprise the K30F fine-grained substrate and a TiSiAlCrN/AlTiN multi-layer coating (as a ...

Diameter : 3 mm - 20 mm

Walter Titex DC150: Versatile and highly wear-resistant ​ Solid carbide twist drill for ISO material groups P, M, K, N, S, H and O With and without internal cooling Shank variants for all adaptors commonly used for ...

Diameter : 3 mm - 20 mm
Length: 62 mm - 131 mm

Solid Carbide Drill Bits - Walter Titex X▪treme Plus The Walter Titex X▪treme Plus is the high-performance drill in the HSC range for the most diverse of materials. Facts and advantages: DPL coating ...

Diameter : 0.1 mm - 1.5 mm
Length: 30 mm

... 200 comes with a complete short drill that is made of carbide alloy that digs holes of approximately 2-3 x, creating better preparations. It has a diameter range of 0.1 to 1.5 mm and increases every 0.01 mm with a coating ...

Diameter : 0.1 mm - 3 mm
Length: 30 mm - 60 mm

... cutting and usable flute length of 3.5 x Ø to 9 x Ø depending on the diameter. It is available in various sizes either with coating from 0.3 mm or without coating.

Diameter : 0.3 mm - 2 mm

... and a digressive helical flute. As pilot drill it is the ideal complement of the twist drill types CrazyDrill SST-Inox and CrazyDrill Flex SST-Inox and it is suitable as well for short drilling ...

Diameter : 0.75 mm - 3 mm

VHM-EF-Drill-Micro-STEEL-6xD-HA-IK-2FF-TIALN twist Drills Solid carbide twist drill EF-Drill-Micro, 6xD in STEEL geometry for use in steel, cast iron and non-ferrous ...

Diameter : 2.8 mm - 20 mm

VHM-EF-Drill-VA-DIN 6537L-HA-IK-2FF-ALCR-T37 twist Drills Solid carbide twist drill EF-Drill, DIN 6537L in VA geometry for use in stainless steel materials. Product ...

Diameter : 2.8 mm - 19 mm

VHM-EF-Drill-STEEL-DIN 6537K-HA-IK-4FF-TIALN-T14 twist Drills Solid carbide twist drill EF-Drill, DIN 6537K in STEEL geometry for use in steel, cast iron and non-ferrous ...

Twist drill DIN 338 type N, HSS-G with TiN-coated bits High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist ...

Diameter : 1 mm - 16 mm
Length: 34 mm - 178 mm

... Präzisionswerkzeuge offers curved drill bit or straight shank, that is made from robust high speed steel. The steel material has a reinforced drill core and parabolic flute, which ensures optimized chip ...

Diameter : 3 mm - 13 mm
Length: 61 mm - 151 mm

... carbide drill bit that is fabricated from solid tungsten carbide K 20 and is finished in titanium aluminum nitride. Constructed with a wear-proof coating that significantly increases the surface hardness ...

Diameter : 1 mm - 20 mm
Length: 32 mm - 104 mm

Categorie Driling Sub-categorie Centre and spotting drills Ø 1.00 - 20.00 Coating Without / TiAlN Z 2

Diameter : 0.5 mm - 2.5 mm
Length: 38 mm

DIXI 1108 Categorie Driling Sub-categorie Centre and spotting drills Ø 0.50 - 2.50 Coating Without / TiAlN Z 2

Diameter : 0.5 mm - 2.5 mm
Length: 32, 30 mm

DIXI 1109 Categorie Driling Sub-categorie Centre and spotting drills Ø 0.50 - 2.50 Coating Without / DICUT Z 2

Diameter : 10 mm

Milling cutter bodies Multi-purpose cutter with indexable inserts With POKOLM's insert cutter system, tools and rotating inserts are perfectly matched to form a comprehensive range of products capable of dealing with almost any condition. Thanks ...

Diameter : 1 mm - 20 mm

The solid carbide spiral drill from Arno-Werkzeuge features a fast chip evacuation, as well as an efficient chip breaking property. This is due to the cutting edges in point and chip breakers on leading edges. The drill ...

Diameter : 9.5 mm - 114 mm
Length: 91.9 mm - 1,003.6 mm

All holders with coolant through Nickel plated drill body Smooth swarf chambers for better chip flow Spiral or straight flute available Torx® - Screws for easy and secure locking Tool selection Drilling ...

Diameter : 1 mm - 31 mm
Length: 26 mm - 174 mm

Diameter : 1 mm - 31 mm
Length: 26 mm - 174 mm

Diameter : 2 mm - 16 mm
Length: 38 mm - 115 mm

Diameter : 2 mm - 6.3 mm
Length: 40 mm - 71 mm

Center drills - Form A - 60° Range of application

Diameter : 2 mm - 6.3 mm
Length: 40 mm - 71 mm

Center drills - Form A - 60° Range of application

Diameter : 3 mm - 20 mm
Length: 40 mm - 104 mm

90°/120° spotting drills - “N” design - Internal standard

Stack drilling with LMT Belin One-shot Drills in Sandwich PCD or diamond coated carbide This type of tool is primarily dedicated to aerospace customers. For riveting of CFRP structural components, ...

CFRP “W-Point” Drill Eliminates Problems of Fraying and Delamination Drilling in CFRP can be difficult because three major considerations have to be addressed to successfully produce a clean cut: ...

Diameter : 16 mm - 20.5 mm

DRILL-SFEED Head changeable 3 Flute Drill for Higher Productivity » Unique geometry for self-centering » High productivity with triple cutting edge » Excellent hole accuracy » No set-up time ...